Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
139 FPS
Ultra 1080p Measured
70 FPS

1440p (2K / QHD)

Low 1440p Measured
90 FPS
Ultra 1440p Measured
46 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
23 FPS
11ms Frame Time
17ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 20,733
Graphics Card
Required 27,947
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 23 32 39 49
1440p QHD 46 57 69 90
1080p Full HD 70 91 107 139

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 91
1920x1080 Low 139
1920x1080 Medium 107
1920x1080 Ultra 70
2560x1440 High 57
2560x1440 Low 90
2560x1440 Medium 69
2560x1440 Ultra 46
3840x2160 High 32
3840x2160 Low 49
3840x2160 Medium 39
3840x2160 Ultra 23

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 5600GT and Intel Arc B580 combination is a modern desktop pairing built for 1080p and 1440p gaming. For The Technomancer, a 2016 Action RPG, the measured data shows this setup clears the 60 FPS threshold at 1080p on every preset, including Ultra at 69.8 FPS, and at 1440p on Low and Medium, with Medium delivering 68.8 FPS. At 4K, however, no preset reaches 60 FPS, with the highest average being 49.4 FPS on Low. The CPU carries a launch MSRP of $140, while the GPU has a launch MSRP of 249 USD. This combo ranks 2815th out of 3696 tested combinations for this game, placing it in the lower-middle tier overall, but the resolution-specific results tell a more nuanced story.

Best Settings per Resolution

At 3840x2160, the data shows no playable settings. The highest average FPS recorded is 49.4 on Low, which falls short of the 60 FPS playable threshold. Medium drops to 38.6, High to 31.9, and Ultra to 23.2. Since the verdict list for 4K is empty, there is no recommended setting; even the lowest preset cannot sustain a smooth frame rate.

At 2560x1440, the playable settings are Low and Medium. The most demanding preset that stays at or above 60 FPS is Medium, with an average of 68.8 FPS. Low is also comfortably above the threshold at 89.5 FPS, but Medium offers higher visual quality while still maintaining a healthy margin over 60. High falls to 57.4, and Ultra drops to 45.8, both below the playable line.

At 1920x1080, all four presets are playable. The most demanding preset that stays at or above 60 FPS is Ultra, averaging 69.8 FPS. High averages 91.3, Medium 107.1, and Low 138.8. This means a user can max out the game’s settings at 1080p and still enjoy a smooth experience, with roughly 10 FPS of headroom above the threshold.

CPU and GPU Roles

The benchmark results indicate a clear shift in bottleneck behavior as resolution increases. At 1920x1080, the frame rate spread between Low and Ultra is substantial: 138.8 FPS down to 69.8, a difference of 69 FPS. This wide gap suggests the CPU has enough headroom to feed the GPU at lower resolutions, allowing the graphics card to stretch its legs. The Ryzen 5 5600GT, with 6 cores and 12 threads, posts a Cinebench R23 multi-core score of 17272 and a single-core score of 2438, placing it in the 74th percentile of all CPUs. Its Passmark single-thread score of 3348 reinforces that it can handle the game’s CPU-bound scenes at 1080p without holding back the Arc B580.

At 2560x1440, the spread narrows: Low averages 89.5 FPS while Ultra averages 45.8, a gap of 43.7 FPS. The reduction in spread indicates the GPU is starting to become the limiting factor. The Arc B580’s raw compute, rated at 13.67 TFLOPS FP32, is being pushed harder, and the CPU’s role diminishes. At 3840x2160, the spread shrinks further: Low at 49.4 and Ultra at 23.2, a difference of 26.2 FPS. Here, the GPU is clearly the dominant constraint. The B580’s 12 GB of GDDR6 memory on a 192-bit bus with 456.0 GB/s bandwidth is insufficient to maintain playable frame rates at 4K, regardless of the CPU’s capability.

The CPU’s 16 MB of L3 cache and dual-channel DDR4 memory support (51.2 GB/s bandwidth) are more than adequate for this game. The data shows that at 1080p, the CPU matters more because the GPU can produce high frame rates, but at 4K, the GPU is the sole bottleneck. Users targeting 1440p will find a balanced workload, with the GPU doing most of the heavy lifting but the CPU still contributing to the 89.5 FPS Low result.

Measured FPS Breakdown

The following averages are taken directly from the measured data. Min and max frame times were not recorded, so only average FPS is available for analysis.

At 3840x2160, the results are as follows: High averages 31.9 FPS, Low averages 49.4 FPS, Medium averages 38.6 FPS, and Ultra averages 23.2 FPS. None of these reach the 60 FPS playable threshold. The gap between Low and Ultra is 26.2 FPS, showing that even the lowest settings cannot double the frame rate.

At 2560x1440, High averages 57.4 FPS, Low averages 89.5 FPS, Medium averages 68.8 FPS, and Ultra averages 45.8 FPS. Low and Medium are the only presets above 60. The difference between Low and Medium is 20.7 FPS, while the drop from Medium to High is 11.4 FPS, and from High to Ultra is 11.6 FPS. This suggests a steep performance penalty for the Ultra preset.

At 1920x1080, High averages 91.3 FPS, Low averages 138.8 FPS, Medium averages 107.1 FPS, and Ultra averages 69.8 FPS. All four presets exceed 60 FPS. The scaling from Low to Ultra is nearly linear in relative terms: Low is roughly double Ultra’s frame rate. The step from Medium to High is 15.8 FPS, and from High to Ultra is 21.5 FPS, indicating that Ultra demands significantly more GPU resources.

Similar Performance Alternatives

For the CPU, the Ryzen 5 5600GT’s average benchmark score is 20733. Its nearest rivals, based on the provided data, are all within a narrow band. The Intel Core i5-12490F scores 20802 with a delta of -0.3%, meaning it is effectively identical in performance. The Intel Xeon 6325P scores 20821 (-0.4%), the Intel Core Ultra 5 125U scores 20826 (-0.4%), and the AMD EPYC 7J13 scores 20845 (-0.5%). Any of these CPUs would deliver nearly the same frame rates in The Technomancer, assuming the GPU remains constant. The 5600GT’s 74th percentile ranking among all CPUs means it outperforms roughly three-quarters of the CPUs in the database.

For the GPU, the Intel Arc B580’s average benchmark score is 23021. Its nearest rivals include the AMD Radeon RX 580 2048SP, which scores 23061 with a delta of -0.2%, and the NVIDIA GeForce RTX 2080, which scores 22895 with a delta of 0.6%. The NVIDIA GeForce RTX 3080 scores 23172 (-0.7%), and the NVIDIA P106-100 scores 23249 (-1%). The B580 sits in the 68th percentile of all GPUs. In practice, swapping to any of these GPUs would yield similar performance in The Technomancer, with the RTX 3080 being marginally faster and the RTX 2080 marginally slower, but all within a 1% band.

The Verdict

This PC can run The Technomancer at 1920x1080 and 2560x1440, but not at 3840x2160. At 1080p, the verdict list includes High, Low, Medium, and Ultra as playable settings, with Ultra being the best at an average of 69.8 FPS. This clears the 60 FPS threshold by 9.8 FPS, providing a smooth experience with maximum visual quality.

At 1440p, the playable settings are Low and Medium, with Medium being the best at 68.8 FPS. This is 8.8 FPS above the threshold. High and Ultra fall short at 57.4 and 45.8 FPS respectively, so users must sacrifice visual quality to stay above 60.

At 4K, there are no playable settings. The highest average is 49.4 FPS on Low, which is 10.6 FPS below the threshold. The data confirms that this GPU cannot handle 4K for this title, and the CPU’s performance is irrelevant at that resolution.

In summary, the AMD Ryzen 5 5600GT and Intel Arc B580 is a capable 1080p and 1440p machine for The Technomancer. It offers full settings at 1080p and medium settings at 1440p, but 4K gaming is out of reach.

FAQ

Q: Can this PC run The Technomancer at 4K resolution?

A: No. The highest average FPS at 3840x2160 is 49.4 on Low settings, which is below the 60 FPS playable threshold. No preset reaches 60 FPS.

Q: What is the best playable setting at 1440p?

A: Medium is the best playable setting at 2560x1440, delivering an average of 68.8 FPS. Low is also playable at 89.5 FPS, but Medium offers higher quality while staying above 60.

Q: What is the best playable setting at 1080p?

A: Ultra is the best playable setting at 1920x1080, with an average of 69.8 FPS. All four presets (Low, Medium, High, Ultra) exceed the 60 FPS threshold.

Q: How does the Ryzen 5 5600GT compare to its nearest CPU rivals?

A: The 5600GT has an average benchmark score of 20733. Its nearest rivals, the Intel Core i5-12490F (20802), Intel Xeon 6325P (20821), Intel Core Ultra 5 125U (20826), and AMD EPYC 7J13 (20845), are all within -0.3% to -0.5% delta, meaning performance is essentially identical.

Q: How does the Intel Arc B580 compare to its nearest GPU rivals?

A: The B580 has an average benchmark score of 23021. Its nearest rivals include the AMD Radeon RX 580 2048SP (23061, -0.2%), NVIDIA GeForce RTX 2080 (22895, 0.6%), NVIDIA GeForce RTX 3080 (23172, -0.7%), and NVIDIA P106-100 (23249, -1%). All are within a 1% performance band.

Q: What are the performance percentiles for the CPU and GPU?

A: The Ryzen 5 5600GT is in the 74th percentile of all CPUs, while the Intel Arc B580 is in the 68th percentile of all GPUs. This indicates the CPU is relatively stronger than the GPU in this pairing.