Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

30%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
71 FPS
Ultra 1080p Measured
37 FPS

1440p (2K / QHD)

Low 1440p Measured
47 FPS
Ultra 1440p Measured
24 FPS

4K (Ultra HD)

Low 4K Measured
26 FPS
Ultra 4K Measured
13 FPS
21.3ms Frame Time
32ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 20,733
Graphics Card
Required 27,947
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 17 20 26
1440p QHD 24 31 36 47
1080p Full HD 37 47 55 71

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 47
1920x1080 Low 71
1920x1080 Medium 55
1920x1080 Ultra 37
2560x1440 High 31
2560x1440 Low 47
2560x1440 Medium 36
2560x1440 Ultra 24
3840x2160 High 17
3840x2160 Low 26
3840x2160 Medium 20
3840x2160 Ultra 13

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 5600GT paired with the Intel Arc B370 presents a specific case for running The Technomancer, an Action RPG from 2016. The recorded data shows this combination is heavily constrained by the graphics solution, a component that ranks in the 5th percentile among all GPUs. The CPU, by contrast, sits in the 74th percentile, providing a solid foundation of processing power that the GPU cannot fully utilize at higher visual demands. This analysis walks through the benchmark results, measured frame rates, and the division of labor between processor and graphics card to determine what this system can actually deliver.

FAQ

Q: What is the best performance this combination can achieve in The Technomancer?

A: The highest recorded average frame rate is 71 FPS, achieved at 1920x1080 resolution with the Low settings preset. This is the only configuration in the measured data that clears the 60 FPS playable threshold.

Q: Can this system run The Technomancer at 2560x1440?

A: No. At 2560x1440, the highest average frame rate is 47 FPS on Low settings. Medium settings drop to 36 FPS, High to 31 FPS, and Ultra to 24 FPS. None of these reach the 60 FPS threshold.

Q: How does the Intel Arc B370 compare to its nearest rivals?

A: The Arc B370 has an average benchmark score of 1184 in the 3dmark Steel Nomad DX12 test. It is 0.2% behind the ATI Mobility Radeon HD 5570, 0.5% behind the ATI Radeon HD 5770, 0.7% behind the AMD Radeon HD 7650M, and 1.4% ahead of the AMD FirePro M2000. All four rivals fall within a 2% performance band.

Q: What is the frame rate difference between Low and Ultra settings at 1920x1080?

A: At 1920x1080, Low settings produce an average of 71 FPS, while Ultra settings produce 37 FPS. This represents a 34 FPS drop, or roughly a 48% reduction in average frame rate when moving from the lowest to the highest preset.

Q: Does the Ryzen 5 5600GT hold back the system in this game?

A: The CPU benchmark data suggests it is not the primary limitation. The Ryzen 5 5600GT scores 20,733 on average and ranks in the 74th percentile of all CPUs. Its nearest rival, the Intel Core i5-12490F, scores 20,802, only 0.3% higher. The GPU, however, ranks in the 5th percentile, indicating the graphics card is the bottleneck.

Q: Is there any resolution where the Ultra preset is playable?

A: No. The Ultra preset never reaches 60 FPS at any measured resolution. At 1920x1080 it averages 37 FPS, at 2560x1440 it averages 24 FPS, and at 3840x2160 it averages 13 FPS.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 5600GT provide context for its processing capability. The Intel Core i5-12490F has an average benchmark score of 20,802, which is 0.3% higher than the 5600GT's 20,733. The Intel Xeon 6325P scores 20,821, also 0.4% higher, and the Intel Core Ultra 5 125U scores 20,826, 0.4% higher. The AMD EPYC 7J13 rounds out the group at 20,845, 0.5% higher. These four processors all sit within a 0.5% performance envelope, meaning any of them would behave nearly identically in CPU-bound scenarios within The Technomancer.

For the Intel Arc B370, the situation is more constrained. Its 3dmark Steel Nomad DX12 score of 1184 places it alongside older discrete and mobile graphics solutions. The ATI Mobility Radeon HD 5570 scores 1186, just 0.2% higher. The ATI Radeon HD 5770 scores 1190, 0.5% higher, and the AMD Radeon HD 7650M scores 1192, 0.7% higher. The AMD FirePro M2000 scores 1168, which is 1.4% lower. A user swapping between these GPUs would see frame rates in The Technomancer that differ by only a few percent, so the measured performance of the Arc B370 is representative of this entire class of graphics hardware.

The practical implication is that the CPU side offers headroom. A system with any of the rival processors listed would likely produce the same frame rates, since the GPU is the limiting factor. The GPU rivals, however, would all produce similar results to the Arc B370, meaning the measured FPS figures in this analysis apply broadly to that performance class.

Measured FPS Breakdown

The measured data covers three resolutions and four settings presets, with average frame rates recorded for all combinations. Minimum and maximum frame rates are only available for the Medium preset at each resolution.

At 3840x2160, the results are consistently low. The Low preset averages 26 FPS. Medium averages 20 FPS, with a minimum of 17 FPS and a maximum of 23 FPS. High averages 17 FPS. Ultra averages 13 FPS. None of these configurations approach the 60 FPS threshold, and even the Low preset falls far short.

At 2560x1440, performance improves but remains below playability. Low averages 47 FPS. Medium averages 36 FPS, with a minimum of 30 FPS and a maximum of 41 FPS. High averages 31 FPS. Ultra averages 24 FPS. The gap between Low and Ultra is 23 FPS, showing that settings scaling has a significant impact at this resolution.

At 1920x1080, the only playable configuration appears. Low averages 71 FPS, clearing the 60 FPS threshold by 11 FPS. Medium averages 55 FPS, with a minimum of 47 FPS and a maximum of 63 FPS. High averages 47 FPS. Ultra averages 37 FPS. The Medium preset's maximum of 63 FPS shows occasional playable moments, but the average falls below the threshold.

The scaling pattern across resolutions is consistent. Moving from 1920x1080 to 2560x1440 reduces average FPS by roughly 34% at Low settings (71 to 47 FPS) and by roughly 23% at High settings (47 to 31 FPS). Moving from 2560x1440 to 3840x2160 further reduces Low from 47 to 26 FPS and High from 31 to 17 FPS. The resolution scaling is steep, confirming the GPU's limited capacity.

The Verdict

The recorded verdict data is unambiguous. At 3840x2160, no settings preset is playable. The highest average is 26 FPS on Low, which is less than half of the 60 FPS threshold. At 2560x1440, the same situation applies: no preset clears 60 FPS, with Low topping out at 47 FPS.

At 1920x1080, the system achieves playability on a single preset. The Low settings preset produces an average of 71 FPS, which clears the 60 FPS threshold by a comfortable margin. This is the only configuration in the entire measured set that meets the playability standard. The verdict designates Low as the best settings at 1920x1080, with an average FPS of 71.

For users who prioritize higher visual fidelity, the system falls short. Medium at 1920x1080 averages 55 FPS, which is below the threshold despite occasional peaks at 63 FPS. High and Ultra are further from playability. The conclusion is that this PC can run The Technomancer, but only at 1080p with the lowest preset. Any increase in resolution or graphical detail sacrifices playable frame rates.

CPU and GPU Roles

The division of labor between the Ryzen 5 5600GT and the Arc B370 is clear from the scaling patterns in the data. The CPU is a 6-core, 12-thread Zen 3 processor with a boost clock of 4.60 GHz and an average benchmark score of 20,733, ranking in the 74th percentile of all CPUs. The GPU is an integrated-class solution with 1,280 shading units, 40 TMUs, and 20 ROPs, ranking in the 5th percentile of all GPUs. This disparity dictates the performance profile.

At all three resolutions, the frame rates are low enough that the CPU is unlikely to be the limiting factor. The CPU's nearest rivals, such as the Intel Core i5-12490F at 0.3% higher average score, would produce nearly identical results, suggesting the processor has ample headroom for this game's demands. The GPU, however, shows steep performance drops as resolution increases. At 3840x2160, even the Low preset only reaches 26 FPS, which is a 63% reduction compared to 1920x1080 Low at 71 FPS. This magnitude of scaling is characteristic of a GPU-bound scenario.

The settings scaling reinforces this interpretation. At 1920x1080, moving from Low to Ultra reduces average FPS from 71 to 37, a 48% drop. At 2560x1440, the same settings change reduces FPS from 47 to 24, a 49% drop. At 3840x2160, Low to Ultra goes from 26 to 13 FPS, a 50% drop. The consistent proportional impact of settings changes indicates that the GPU's fill rate and shading capacity are the decisive factors.

The CPU's role is therefore supportive rather than dominant. It provides enough processing power to feed the GPU at 1080p Low, where the system reaches 71 FPS. At higher resolutions and settings, the GPU cannot keep pace regardless of CPU capability. A faster GPU would be the only path to higher frame rates; the CPU would not need replacement.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600GT and Intel Arc B370 ranks 3,408 out of 3,696 tested combos in The Technomancer. This places it in the bottom 8% of all tested systems. The rank reflects the GPU's 5th percentile standing, which dominates the overall result.

The CPU's 74th percentile ranking provides context for what this combo could achieve with a different graphics card. The 5600GT is not a weak processor by any measure; its average score of 20,733 is within 0.5% of several enterprise and desktop rivals. The bottleneck is entirely on the graphics side. The Arc B370's average benchmark score of 1,184 places it alongside decade-old discrete GPUs like the ATI Radeon HD 5770, which explains the low overall ranking.

In practical terms, this combo ranks below the vast majority of tested systems because the GPU cannot deliver playable frame rates at most settings. The only playable configuration, 1080p Low at 71 FPS, is a minimal workload that even this low-end GPU can handle. For any more demanding configuration, the system falls below 60 FPS and the ranking reflects that limitation.

Best Settings per Resolution

At 3840x2160, no preset meets the 60 FPS threshold, so there is no recommended configuration. The closest is Low at 26 FPS, but this is far below playability.

At 2560x1440, the same situation applies. Low averages 47 FPS, which is the highest recorded value at this resolution, but it falls 13 FPS short of the threshold. No settings preset is recommended.

At 1920x1080, the Low preset is the only viable option. It averages 71 FPS, clearing the 60 FPS threshold by 11 FPS. This is the most demanding preset that stays at or above 60 FPS, and it is also the only preset that does so. The Medium preset at 55 FPS is close but not sufficient, and its maximum of 63 FPS does not compensate for the average being below the line.

Users with this hardware who want to play The Technomancer should set the resolution to 1920x1080 and select Low settings. This delivers an average of 71 FPS with the recorded data showing no minimum or maximum frame rate anomalies. Higher presets at this resolution, or any preset at higher resolutions, will result in sub-60 FPS performance.