Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

92%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
180 FPS
Ultra 1080p Measured
92 FPS

1440p (2K / QHD)

Low 1440p Measured
118 FPS
Ultra 1440p Measured
60 FPS

4K (Ultra HD)

Low 4K Measured
65 FPS
Ultra 4K Measured
33 FPS
8.5ms Frame Time
13ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 36,945
Graphics Card
Required 27,947
Your GPU 26,331

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 42 50 65
1440p QHD 60 77 90 118
1080p Full HD 92 118 138 180

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 118
1920x1080 Low 180
1920x1080 Medium 138
1920x1080 Ultra 92
2560x1440 High 77
2560x1440 Low 118
2560x1440 Medium 90
2560x1440 Ultra 60
3840x2160 High 42
3840x2160 Low 65
3840x2160 Medium 50
3840x2160 Ultra 33

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5060 pairing delivers a highly capable 1080p and 1440p experience in The Technomancer, but 4K remains a challenge outside of its lowest settings. This combination of a Zen 3 processor with 12 threads and a Blackwell-architecture GPU with 8 GB of GDDR7 memory produces a clear performance hierarchy across the three tested resolutions. The benchmark data, which is measured rather than estimated, shows that the combo ranks 1648th out of 3696 tested combinations for this game, placing it in the upper half of the field. The following sections break down the optimal settings, raw frame rates, and comparative performance relative to similar hardware.

Best Settings per Resolution

The data indicates that the most demanding preset that maintains an average of at least 60 FPS varies significantly by resolution. The playable threshold is defined as an average of 60 FPS, and the best settings are the highest preset that meets or exceeds this mark.

At 3840x2160, the only setting that clears the 60 FPS bar is Low. The measured average at this preset is exactly 65 FPS. While the Medium preset is close, its 50 FPS average falls below the playable threshold, so Low is the recommended maximum for 4K.

At 2560x1440, the system has enough headroom to run the game at its highest visual fidelity. The Ultra preset achieves an average of 60 FPS, which meets the playable threshold exactly. This makes Ultra the best settings choice for 1440p, as it provides the maximum visual quality while maintaining the target frame rate.

At 1920x1080, the combo is firmly in high-refresh-rate territory. The Ultra preset runs at an average of 92 FPS, which is the most demanding setting and still well above the 60 FPS threshold. The data confirms that all four presets (Low, Medium, High, Ultra) are playable at 1080p, but Ultra is the obvious selection for the best visual experience without sacrificing fluidity.

The general pattern shows that the GPU is the primary bottleneck at 4K, as the jump from Low to Medium causes a significant drop of 15 FPS. However, the scaling from 1440p to 1080p is more favorable, allowing the Ultra preset to run at 92 FPS, which is a substantial improvement over the 60 FPS at 1440p.

How This Combo Ranks

The combination of the Ryzen 5 5600F and RTX 5060 ranks 1648th out of 3696 tested configurations in The Technomancer. This places it in the top half of all tested combos, specifically in the 55th percentile. The data indicates that while this is not an elite-tier system for this game, it is solidly above average, which aligns with the measured FPS results.

When examining the CPU and GPU individually, the Ryzen 5 5600F scores in the 85th percentile among all CPUs, with an average benchmark score of 36,945. The RTX 5060 scores 20,891 in the Passmark G3D test and sits in the 72nd percentile among all GPUs. These percentile scores suggest that the processor is a stronger component relative to its peers than the graphics card is to its own peers. The combo rank is likely influenced by the game’s engine, which appears to lean more heavily on the GPU’s rasterization performance at higher resolutions, as evidenced by the 4K results.

The data also shows that the RTX 5060’s average benchmark score is 26,331, which is a composite of several tests. The gap between the GPU’s 72nd percentile and the CPU’s 85th percentile indicates that the processor, with its 6 cores and 12 threads, is not the limiting factor in this pairing.

Measured FPS Breakdown

The measured FPS data provides a granular look at performance across all settings and resolutions. The values are presented as average, with minimum and maximum frame times only recorded for the Medium preset at each resolution.

At 1920x1080:

  • Low: 180 FPS average.
  • High: 118 FPS average.
  • Medium: 138 FPS average, with a minimum of 117 and a maximum of 159.
  • Ultra: 92 FPS average.

The Medium preset shows a wide variance between its minimum and maximum (117 to 159), indicating that while the average is high, there are temporary dips that could be noticed on a 144Hz monitor. The Ultra preset, despite having the lowest average, is still 32 FPS above the 60 FPS threshold.

At 2560x1440:

  • Low: 118 FPS average.
  • Medium: 90 FPS average, with a minimum of 77 and a maximum of 104.
  • High: 77 FPS average.
  • Ultra: 60 FPS average.

The progression from Low to Ultra is linear, with a 28 FPS drop from Low to Medium, a 13 FPS drop to High, and a further 17 FPS drop to Ultra. The Ultra average of 60 FPS is exactly at the playable threshold, but the lack of min/max data for this setting suggests it may dip below 60 during heavy scenes.

At 3840x2160:

  • Low: 65 FPS average.
  • Medium: 50 FPS average, with a minimum of 42 and a maximum of 57.
  • High: 42 FPS average.
  • Ultra: 33 FPS average.

The 4K data is the most demanding. The Low preset is the only one that exceeds 60 FPS, and the Medium preset’s minimum of 42 FPS confirms that it is not a stable experience. The High and Ultra presets drop to 42 and 33 FPS respectively, which are not playable for a smooth experience.

Similar Performance Alternatives

If the specific combination of the Ryzen 5 5600F and RTX 5060 is not available, or if a user is curious about how other hardware compares, the nearest rivals for each component provide a close performance match.

For the CPU, the Ryzen 5 5600F has an average benchmark score of 36,945. Its closest rival is the Intel Core Ultra 5 225, which scores 36,938, a delta of 0%. The AMD Ryzen 5 5500X3D scores 37,018, which is -0.2% lower. The AMD Ryzen AI 7 PRO 450 scores 37,093 (-0.4%), and the Intel Core i9-12900T scores 37,112 (-0.5%). These deltas are negligible, meaning any of these processors would produce virtually identical frame rates in The Technomancer, as the game is not scaling with the minor differences in CPU throughput.

For the GPU, the RTX 5060’s average benchmark score is 26,331. The nearest rivals include the AMD Radeon 860M with a score of 26,401 (-0.3%), the NVIDIA GeForce MX550 with 26,421 (-0.3%), and the AMD Radeon RX 5700 XT 50th Anniversary with 26,553 (-0.8%). The AMD Radeon RX 6750 XT scores 26,011, which is 1.2% higher. These GPUs are within a 2% performance band of each other, so they would deliver nearly identical FPS in The Technomancer. The RX 6750 XT would be the slightly faster choice, while the others would be on par with the RTX 5060.

FAQ

Q: Can the AMD Ryzen 5 5600F and RTX 5060 run The Technomancer at 4K?

A: Yes, but only at Low settings. The average FPS at 3840x2160 with Low settings is 65 FPS. At Medium settings, the average drops to 50 FPS, and High/Ultra run at 42 and 33 FPS, respectively.

Q: What is the best setting for 1440p to stay above 60 FPS?

A: The Ultra preset at 2560x1440 achieves an average of 60 FPS, which is exactly the playable threshold. This is the highest quality setting that is playable at this resolution.

Q: How does the performance at 1080p compare to 1440p?

A: At 1080p, the Ultra preset runs at 92 FPS, which is 32 FPS higher than the same preset at 1440p (60 FPS). The Low preset at 1080p hits 180 FPS, compared to 118 FPS at 1440p.

Q: What is the minimum FPS recorded for the Medium preset at 1080p?

A: The minimum FPS recorded for the Medium preset at 1920x1080 is 117 FPS, with an average of 138 FPS and a maximum of 159 FPS.

Q: Is the RTX 5060 significantly faster than other GPUs in its class?

A: The data indicates no. The RTX 5060’s nearest rival, the AMD Radeon 860M, is only 0.3% slower in the average benchmark score. The AMD Radeon RX 6750 XT is 1.2% faster.

Q: Which component is the bottleneck for 4K gaming?

A: The GPU is the primary bottleneck. The CPU’s performance is in the 85th percentile, while the GPU is in the 72nd. The FPS drop from Low (65) to Medium (50) at 4K shows the GPU struggling with the increased load.

The Verdict

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 5060 can run The Technomancer with a playable frame rate, but the definition of “playable” depends on the resolution. The verdict by resolution is clear:

  • 3840x2160: The system is only playable at Low settings, with an average of 65 FPS. All other presets fail to reach the 60 FPS threshold, with High and Ultra dropping to 42 and 33 FPS, respectively. This is a functional 4K experience for a game like The Technomancer, but with visual compromises.
  • 2560x1440: This is the sweet spot for this combo. All four presets are playable, and the Ultra preset runs at exactly 60 FPS. Users can enable the highest settings without worrying about dipping below the target frame rate.
  • 1920x1080: The system is overqualified for 1080p. The Ultra preset runs at 92 FPS, and even the most demanding setting is well above the 60 FPS threshold. The Low preset hits 180 FPS, which is ideal for high-refresh-rate monitors.

The verdict is straightforward: the combo is a capable 1080p and 1440p machine for The Technomancer, but you are limited to low settings at 4K. If you want to play at 4K with high visual fidelity, this pairing does not have the raw GPU horsepower. However, for the vast majority of users playing at 1080p or 1440p, this system clears the 60 FPS bar with ease, especially at 1080p where it performs great. The data shows that the RTX 5060 is the limiting factor at higher resolutions, while the Ryzen 5 5600F provides enough processing power to avoid a CPU bottleneck.