Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 77 | 91 | 118 |
| 1440p QHD | 110 | 141 | 159 | 175 |
| 1080p Full HD | 159 | 173 | 183 | 202 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 4090 delivers an exceptionally strong performance profile for The Technomancer, with measured frame rates that clear the 60 FPS playability threshold at every resolution and preset combination tested. The data shows a system that is heavily GPU-bound at lower resolutions, with the CPU becoming a more significant factor as resolution increases, yet the overall experience remains fluid and responsive across the board.
Measured FPS Breakdown
At 3840x2160, the RTX 4090 demonstrates its high-end pedigree with a wide spread of frame rates across the four tested presets. The Low preset produces an average of 118 FPS, providing a substantial headroom above the 60 FPS playability threshold. Moving up to Medium, the average drops to 91 FPS, with a minimum of 77 FPS and a maximum of 104 FPS recorded during the benchmark run. The High preset delivers a still-fluid 77 FPS average, while the most demanding Ultra setting holds at 61 FPS average, which just barely clears the playability bar. The scaling from Low to Ultra at 4K represents a roughly 48% reduction in average frame rate, indicating that the GPU is the primary bottleneck at this resolution, with each preset step costing a meaningful chunk of performance.
Stepping down to 2560x1440, the performance envelope expands considerably. The Low preset averages 175 FPS, while Medium delivers 159 FPS with a recorded minimum of 135 FPS and maximum of 183 FPS. High sits at 141 FPS average, and Ultra maintains an impressive 110 FPS average. The gap between Low and Ultra at 1440p is approximately 37%, which is a smaller relative penalty than at 4K, suggesting that the CPU begins to exert more influence at this resolution, capping the upper bounds of the GPU's output. The minimum frame rate at Medium (135 FPS) remains far above the playability threshold, ensuring consistent smoothness even during demanding scenes.
At 1920x1080, the system reaches its peak performance figures. The Low preset averages 202 FPS, while Medium delivers 183 FPS with a minimum of 156 FPS and maximum of 211 FPS. High averages 173 FPS, and Ultra still manages 159 FPS average. The scaling from Low to Ultra at 1080p is only about 21%, which is the smallest relative drop of any resolution tested. This strongly indicates that the Ryzen 5 5600F is the limiting factor at 1080p, as the RTX 4090 has ample headroom to render frames faster than the CPU can feed it. The minimum frame rate at Medium (156 FPS) is higher than the average frame rate at Ultra for 4K, highlighting the dramatic performance difference between resolutions.
Similar Performance Alternatives
Looking at the CPU benchmarks, the Ryzen 5 5600F sits at the 85th percentile among all processors, with an average benchmark score of 36,945. Its nearest rivals in synthetic testing are remarkably close in performance. The Intel Core Ultra 5 225 matches it almost exactly with an average score of 36,938, representing a 0% delta. The AMD Ryzen 5 5500X3D scores 37,018, which is 0.2% higher, while the AMD Ryzen AI 7 PRO 450 achieves 37,093, 0.4% ahead. The Intel Core i9-12900T rounds out the group with a score of 37,112, 0.5% higher than the 5600F. These negligible differences mean that swapping the Ryzen 5 5600F for any of these alternatives would produce virtually identical frame rates in The Technomancer, since the game's CPU demands are evidently well within the capabilities of all these processors.
On the GPU side, the RTX 4090 ranks at the 88th percentile among all graphics cards, with an average benchmark score of 60,347. Its nearest rivals in the database are surprising in their diversity. The Intel Arc Pro A60 scores 60,326, essentially tied with a 0% delta. The AMD Radeon Pro Vega 48 scores 60,140, 0.3% lower, while the AMD Radeon Pro W6600M scores 61,896, which is 2.5% higher. The AMD Radeon PRO V710 scores 58,657, 2.9% lower. These professional-grade cards may not be typical gaming choices, but the benchmark data indicates they would deliver comparable raw performance in this title. The tight clustering of these scores within a 3% band suggests that the RTX 4090's massive memory bandwidth and compute resources are not fully utilized by The Technomancer, which is an older title with less demanding graphics requirements.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains an average of at least 60 FPS is Ultra, which delivers exactly 61 FPS average. This is a razor-thin margin, but it clears the playability threshold. The High preset also remains viable at 77 FPS, but Ultra represents the maximum visual quality attainable at 4K while staying playable.
At 2560x1440, the Ultra preset again provides the best visual quality while maintaining 110 FPS average, which is nearly double the playability threshold. This leaves substantial headroom for any future driver optimizations or additional in-game effects that might be enabled through mods or tweaks.
At 1920x1080, the Ultra preset runs at 159 FPS average, offering the full visual experience with more than 2.5 times the necessary frame rate for smooth gameplay. This resolution is clearly the sweet spot for this combination, as even the most demanding settings leave significant performance reserves on the table.
The Verdict
Benchmark results indicate that this PC can definitively run The Technomancer at all tested resolutions and settings. At 3840x2160, every preset from Low to Ultra clears the 60 FPS playability threshold, with Ultra achieving 61 FPS average. This means the system can handle 4K gaming at maximum quality settings, though the margin is slim enough that users who prefer a more comfortable buffer might choose High at 77 FPS instead.
At 2560x1440, all four presets are playable, with Ultra delivering 110 FPS average. This provides an excellent balance of visual fidelity and performance, with enough headroom to ensure consistent frame pacing even in the most chaotic combat encounters. The 110 FPS average at Ultra is nearly double the playability threshold, making this resolution the recommended choice for players who want both high quality and high frame rates.
At 1920x1080, the system performs exceptionally well across all settings, with Ultra averaging 159 FPS. This resolution is ideal for competitive play or for users with high refresh rate monitors, as the frame rates comfortably exceed 144 Hz at the highest quality preset. The verdict is clear: this combination is more than capable of running The Technomancer at maximum settings at any resolution, with the only caveat being the relatively tight 61 FPS margin at 4K Ultra.
CPU and GPU Roles
The data reveals a clear shift in component roles as resolution changes. At 1920x1080, the CPU is the primary limiting factor. The frame rate scaling from Low (202 FPS) to Ultra (159 FPS) is only 21%, which is a small penalty for such a large increase in graphical load. This pattern indicates that the Ryzen 5 5600F is saturating at around 200 FPS, and the GPU is not being fully utilized at lower settings. The RTX 4090 could produce higher frame rates at 1080p, but the CPU's single-thread performance caps the output.
At 2560x1440, the balance shifts slightly toward the GPU. The scaling from Low (175 FPS) to Ultra (110 FPS) is 37%, which is a larger penalty than at 1080p. This indicates that the GPU is becoming more influential, as the increased pixel count begins to tax the rendering pipeline. However, the absolute frame rates remain high enough that the CPU still plays a significant role in maintaining those numbers.
At 3840x2160, the GPU becomes the dominant factor. The scaling from Low (118 FPS) to Ultra (61 FPS) is 48%, the largest penalty of any resolution. The 4K pixel count places a heavy load on the RTX 4090, and the frame rates reflect the GPU's rendering capabilities rather than CPU limitations. The minimum frame rate at Medium (77 FPS) still exceeds the playability threshold, showing that even in the most demanding scenarios, the GPU maintains acceptable performance.
How This Combo Ranks
The Ryzen 5 5600F and RTX 4090 combination ranks 376th out of 3,696 tested combos for The Technomancer, placing it in the top 10% of all configurations in the database. This is a strong ranking that reflects the system's ability to maintain high frame rates across all resolutions and settings. The rank is likely influenced by the CPU's position at the 85th percentile and the GPU's position at the 88th percentile, which together create a balanced pairing that avoids significant bottlenecks at any resolution.
The ranking is particularly notable given that the RTX 4090 is an end-of-life product with a successor already released, yet it still performs admirably in this title. The CPU, released in 2025, is a more recent addition to the market, and its Zen 3 architecture with 6 cores and 12 threads provides adequate processing power for this game. The combination's rank of 376 out of 3,696 indicates that it outperforms the vast majority of alternative configurations, with only 375 combinations achieving better results in The Technomancer. Given the game's release date of 2016, this modern hardware pairing has no trouble delivering a smooth experience, and the benchmark data confirms that it ranks among the top-performing systems in the database.