Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 41 | 52 | 61 | 80 |
| 1440p QHD | 75 | 96 | 112 | 146 |
| 1080p Full HD | 114 | 146 | 171 | 202 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
Measured FPS Breakdown
The Technomancer presents a demanding workload for this AMD Ryzen 5 5600F + NVIDIA GeForce RTX 3080 pairing, with results varying dramatically across resolutions and presets. At 3840x2160, the frame rate drops sharply as settings increase. Low settings deliver an average of 80 FPS, which is comfortable, but Medium drops to 61 FPS average with a minimum of 52 and maximum of 71. High settings average 52 FPS, and Ultra falls to 41 FPS — both below the 60 FPS playability threshold. The 4K data reveals a steep scaling curve, where moving from Low to Ultra costs roughly half the frame rate.
Stepping down to 2560x1440, the picture improves considerably. Low settings produce 146 FPS average, Medium reaches 112 FPS (with min/max of 95/129), High hits 96 FPS, and Ultra still manages 75 FPS. Every preset at this resolution clears the 60 FPS mark, with the gap between Low and Ultra representing a 71 FPS swing. At 1920x1080, the combo is thoroughly capable: Low settings yield 202 FPS average, Medium 171 FPS (min 146, max 197), High 146 FPS, and Ultra 114 FPS. Notably, the 1080p Medium result shows a 51 FPS spread between minimum and maximum, indicating some scene-to-scene variability even at lower resolutions.
The measured FPS data includes min/max figures only for Medium settings across all three resolutions. At 4K Medium, the range spans 52 to 71 FPS, a 19 FPS delta. At 1440p Medium, the spread tightens to 95–129 FPS. At 1080p Medium, it widens slightly to 146–197 FPS, a 51 FPS range. These figures suggest Medium presets exhibit the most pronounced frame pacing variance, likely due to dynamic scene complexity in this Action RPG.
CPU and GPU Roles
The scaling patterns across resolutions reveal where each component carries the load. At 1920x1080, the RTX 3080 has significant headroom; even Ultra settings reach 114 FPS, while Low pushes to 202 FPS. The Ryzen 5 5600F, with its 6 cores and 12 threads, appears to be the limiting factor at this resolution, as the GPU is not being saturated at lower presets. The 56 FPS difference between 1080p Low and 1440p Low (202 vs 146) suggests the CPU can drive high frame rates, but the GPU begins to bind as resolution increases.
At 2560x1440, both components share the workload more evenly. The transition from 1440p to 4K at Low settings shows an 66 FPS drop (146 to 80), indicating the GPU becomes the primary constraint as pixel count rises. At Ultra settings, the scaling is even more pronounced: 1440p Ultra averages 75 FPS, while 4K Ultra drops to 41 FPS — a 34 FPS reduction. This 45% performance loss from a 1.78x pixel increase points to the RTX 3080's 10 GB GDDR6X memory and memory bandwidth being taxed at 4K, particularly with Ultra effects.
The preset scaling at each resolution further clarifies component roles. At 1080p, moving from Low to Ultra costs 88 FPS (202 to 114), a relatively modest 44% reduction. At 1440p, the same preset jump costs 71 FPS (146 to 75), a 49% reduction. At 4K, the penalty is 39 FPS (80 to 41), a 49% reduction. The consistent percentage drop across resolutions indicates the RTX 3080 is the dominant factor in preset scaling, while the CPU maintains adequate frame pacing even at high settings. The Ryzen 5 5600F's single-thread score of 2872 in Passmark and multithread score of 19236 suggest sufficient processing power for this 2016 title, but the data shows the GPU is the bottleneck at higher resolutions.
Similar Performance Alternatives
Looking at the nearest rivals for both components, several combinations would deliver comparable performance. The CPU's nearest rival is the Intel Core Ultra 5 225, with an average benchmark score of 36938 versus the Ryzen 5 5600F's 36945 — a 0% delta. The AMD Ryzen 5 5500X3D scores 37018, just 0.2% higher, while the AMD Ryzen AI 7 PRO 450 achieves 37093 (0.4% higher). The Intel Core i9-12900T rounds out the group at 37112, 0.5% above the 5600F. Any of these processors would produce nearly identical frame rates in The Technomancer, given the game's modest CPU demands at lower resolutions.
On the GPU side, the RTX 3080's nearest rivals are surprising in their diversity. The NVIDIA P106-100 scores 23249, a 0.3% difference from the RTX 3080's 23273 average. The AMD Radeon Pro Vega 16 (23250) and AMD Radeon RX 6600M (23273) both sit within 0.4% of the RTX 3080's score, while the AMD Radeon R9 M290X (23276) is 0.4% higher. These deltaPct values indicate the benchmark scores are nearly identical, though real-world gaming performance may differ substantially due to architectural differences. Still, based on the data, a system with any of these GPUs paired with the 5600F would produce similar measured FPS in The Technomancer.
For a full-system comparison, pairing the Ryzen 5 5600F with any of these GPU alternatives would yield frame rates within a few percent of the RTX 3080 configuration. The 0.3–0.5% deltas in benchmark scores translate to roughly 1–2 FPS differences at 4K Medium, and even less at lower resolutions where the CPU takes on more responsibility. The Intel Core Ultra 5 225 or Ryzen 5 5500X3D CPUs paired with an RX 6600M or P106-100 would behave almost identically in this game, based on the available data.
How This Combo Ranks
The Ryzen 5 5600F + RTX 3080 combination ranks 1110 out of 3696 tested combos in The Technomancer, placing it in the 70th percentile overall. This is a strong showing for a mid-range CPU paired with a high-end GPU from the previous generation. The RTX 3080's percentile rank among all GPUs is 68, while the CPU ranks at the 85th percentile among all processors. The GPU's lower percentile relative to the CPU indicates the graphics card is the limiting factor in this pairing, which aligns with the measured FPS data showing GPU-bound behavior at higher resolutions.
The 1110th rank out of 3696 means roughly 30% of tested combinations deliver better performance in this game. However, the verdict data shows this combo clears 60 FPS at every resolution with at least one preset, which is more than many combinations achieve. The 4K Medium result of 61 FPS average is borderline, while 1440p Ultra at 75 FPS and 1080p Ultra at 114 FPS provide comfortable margins. The rank reflects the 4K Ultra result of 41 FPS, which drags down the overall standing despite strong performance at lower resolutions.
The Verdict
Yes, this PC can run The Technomancer. The verdict data confirms playable performance at all three tested resolutions, though the margin varies. At 3840x2160, the playable settings are Low (80 FPS average) and Medium (61 FPS average), while High (52 FPS) and Ultra (41 FPS) fall short of the 60 FPS threshold. At 2560x1440, all four presets are playable: Low at 146 FPS, Medium at 112 FPS, High at 96 FPS, and Ultra at 75 FPS. At 1920x1080, everything is playable with significant headroom: Low at 202 FPS, Medium at 171 FPS, High at 146 FPS, and Ultra at 114 FPS.
The 60 FPS playability threshold is cleared in 10 of the 12 tested configurations. The only failures occur at 4K High and Ultra. The Ryzen 5 5600F's 85th percentile CPU rank and the RTX 3080's 68th percentile GPU rank combine to deliver a system that handles this 2016 Action RPG well at standard resolutions, with 1080p and 1440p providing excellent frame rates across all settings.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 61 FPS. The minimum of 52 FPS does dip below the threshold, so players sensitive to frame drops may prefer Low at 80 FPS for a more consistent experience. The data shows Medium is technically playable, but the margin is slim.
At 2560x1440, Ultra is the best playable setting, delivering 75 FPS average. This provides a comfortable buffer above the 60 FPS threshold while maximizing visual quality. The minimum FPS for Ultra is not provided, but the average suggests reliable performance. Players seeking maximum fluidity can use Low for 146 FPS, but Ultra offers the best balance of quality and speed.
At 1920x1080, Ultra is again the top playable preset, with an impressive 114 FPS average. This provides a 54 FPS buffer above the threshold, making it a safe choice for high-refresh-rate displays. The Medium preset's minimum of 146 FPS indicates even the fastest preset stays well above 60 FPS, so players can choose Ultra with confidence. The 1080p results show this combination excels at the most common gaming resolution, with all presets delivering well above playable frame rates.