Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

77%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
233 FPS
Ultra 1080p Measured
130 FPS

1440p (2K / QHD)

Low 1440p Measured
163 FPS
Ultra 1440p Measured
85 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
46 FPS
6ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 20,468
Graphics Card
Required 27,947
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 60 68 89
1440p QHD 85 110 128 163
1080p Full HD 130 167 195 233

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 167
1920x1080 Low 233
1920x1080 Medium 195
1920x1080 Ultra 130
2560x1440 High 110
2560x1440 Low 163
2560x1440 Medium 128
2560x1440 Ultra 85
3840x2160 High 60
3840x2160 Low 89
3840x2160 Medium 68
3840x2160 Ultra 46

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 5070 delivers a comprehensive performance profile in The Technomancer, with average frame rates that scale predictably across resolutions and presets. The data set includes measured average FPS for Low, Medium, High, and Ultra settings at 1920x1080, 2560x1440, and 3840x2160, with the playable threshold set at 60 FPS. Across all twelve measured configurations, the combination never dips below 46.1 FPS, and it exceeds the 60 FPS threshold in nine of the twelve scenarios, indicating a system that is broadly capable for this Action RPG.

Measured FPS Breakdown

At 1920x1080, the frame rates are uniformly high, with the Low preset producing an average of 232.8 FPS. Moving to Medium yields 195.3 FPS, a 37.5 FPS reduction from Low, while High settings produce 167.3 FPS, another 28 FPS step down. The Ultra preset, the most demanding configuration at this resolution, still achieves an average of 129.6 FPS. The spread between Low and Ultra at 1080p is 103.2 FPS, demonstrating that the RTX 5070 has substantial headroom even under maximum load at this resolution.

At 2560x1440, the same pattern holds but with lower absolute values. The Low preset averages 162.9 FPS, followed by Medium at 128.1 FPS and High at 110.2 FPS. The Ultra preset drops to 84.8 FPS, which remains comfortably above the 60 FPS playable threshold. The delta between Low and Ultra at this resolution widens to 78.1 FPS, reflecting the increased pixel count's impact on the GPU's rendering workload.

At 3840x2160, the scaling becomes more pronounced. Low settings produce an average of 89.2 FPS, Medium drops to 68 FPS, and High is nearly at the threshold with 60.3 FPS. The Ultra preset falls below the playable line at 46.1 FPS, making it the only configuration in the entire data set that fails to hit 60 FPS. The gap between Low and Ultra here is 43.1 FPS, showing that 4K resolution stresses the RTX 5070's 12 GB GDDR7 memory and 672.0 GB/s bandwidth to a greater degree.

The absence of min and max FPS values in the data means only average frame rates are available for analysis, but the progression from 1080p to 1440p to 2160p is consistent: each resolution step roughly halves the headroom at equivalent settings, with the 4K Ultra preset representing the sole bottleneck.

How This Combo Ranks

The combination of the Ryzen 5 5600 and RTX 5070 achieves a rank of 736 out of 3696 tested combos in The Technomancer, placing it in the 80th percentile of all possible system configurations. This rank reflects the system's ability to handle the game's demands across the full resolution spectrum, though the 4K Ultra failure prevents a higher standing.

The CPU's individual percentile versus all processors is 74, with an average benchmark score of 20468. Its nearest rivals in synthetic testing include the Intel Core Ultra 7 258V, which scores 20454 (a delta of 0.1%), the AMD Ryzen 5 8500G at 20425 (0.2% delta), the AMD EPYC 9454P at 20422 (0.2% delta), and the AMD EPYC 7713 at 20363 (0.5% delta). These deltas are negligible, indicating that the Ryzen 5 5600's single-threaded and multi-threaded performance is closely matched by a diverse set of processors.

The GPU's percentile versus all GPUs is 82, with an average benchmark score of 40377. Its nearest rivals are the AMD Radeon Pro 580 at 40318 (0.1% delta), the AMD Radeon Pro WX 7100 at 40063 (0.8% delta), the AMD Radeon Pro 5300 at 40870 (-1.2% delta), and the NVIDIA RTX A500 Mobile at 39568 (2% delta). The RTX 5070 outperforms all but the Radeon Pro 5300 in synthetic benchmarks, though the differences are within 2% for all four rivals.

In the context of The Technomancer specifically, the combo's rank of 736 suggests that while it is not at the very top of the charts, it outperforms roughly 80% of all tested configurations. This is consistent with the measured FPS data, which shows strong performance at 1080p and 1440p but a clear limitation at 4K Ultra.

CPU and GPU Roles

The data reveals a clear division of labor between the Ryzen 5 5600 and the RTX 5070 depending on resolution. At 1920x1080, the CPU's role becomes more prominent because the GPU can render frames faster than the processor can feed it. The jump from Low to Ultra at 1080p only reduces average FPS from 232.8 to 129.6, a 44% drop, which indicates that the GPU is being pushed harder while the CPU maintains a steady stream of draw calls. The Ryzen 5 5600's six cores and twelve threads, with a boost clock of 4.40 GHz, provide sufficient single-thread performance for this 2016-era game, as evidenced by its Cinebench R23 single-core score of 2584 and Geekbench single-core score of 1936.

At 2560x1440, the balance shifts toward the GPU. The 78.1 FPS difference between Low and Ultra settings at this resolution is larger than the 103.2 FPS difference at 1080p, but the relative drop from Low to Ultra is 48%, similar to 1080p. This suggests that the GPU starts to become the limiting factor, as the increased pixel count requires more shading operations from the RTX 5070's 6144 shading units. The CPU's multi-threaded capabilities, reflected in its Cinebench R23 multi-core score of 18309 and Passmark multi-thread score of 21541, remain sufficient to keep up.

At 3840x2160, the GPU is unequivocally the dominant constraint. The drop from Low to Ultra is 43.1 FPS, and the Ultra preset's 46.1 FPS average is well below the 60 FPS threshold. This is a direct consequence of the RTX 5070's 30.87 TFLOPS FP32 performance and 201.0 GPixel/s pixel rate being taxed by 8.3 million pixels per frame. The CPU's role diminishes further, as the Ryzen 5 5600's 3.50 GHz base clock and 32 MB L3 cache are more than adequate for the game's logic at any resolution. The scaling between presets at 4K — from 89.2 FPS at Low to 68 FPS at Medium to 60.3 FPS at High — shows a nearly linear relationship with the GPU's workload, confirming that the RTX 5070 is the sole bottleneck at this resolution.

FAQ

Q: Can this system run The Technomancer at 4K resolution?

A: Yes, but with limitations. At 3840x2160, the Low preset averages 89.2 FPS, Medium averages 68 FPS, and High averages 60.3 FPS. The Ultra preset falls below the 60 FPS threshold at 46.1 FPS, so 4K gaming is playable at High settings or lower.

Q: What is the best preset at 2560x1440?

A: The Ultra preset is fully playable at this resolution, with an average of 84.8 FPS. This is 24.8 FPS above the 60 FPS threshold, providing headroom for demanding scenes. Medium and High presets also work, at 128.1 FPS and 110.2 FPS respectively.

Q: How does the CPU affect performance at lower resolutions?

A: At 1920x1080, the Ryzen 5 5600's single-thread performance becomes more relevant. Its 3dmark single-thread score of 882 and Cinebench R15 single-core score of 260 help maintain high frame rates, but the GPU is still the primary driver, as shown by the 103.2 FPS difference between Low and Ultra presets.

Q: Is the RTX 5070's 12 GB memory sufficient for this game?

A: The data does not include memory usage figures, but the measured FPS values show no catastrophic drops that would indicate memory overflow. The GPU's 672.0 GB/s bandwidth is sufficient for all tested presets, including 4K High at 60.3 FPS.

Q: What are the closest GPU alternatives in terms of synthetic performance?

A: The AMD Radeon Pro 580 (AVG score 40318, 0.1% slower) and AMD Radeon Pro WX 7100 (40063, 0.8% slower) are nearly identical in synthetic benchmarks. The AMD Radeon Pro 5300 is 1.2% faster, while the NVIDIA RTX A500 Mobile is 2% slower.

Q: Does the system maintain 60 FPS at 1080p Ultra?

A: Yes, the Ultra preset at 1920x1080 averages 129.6 FPS, which is more than double the 60 FPS threshold. Even the most demanding configuration at this resolution provides substantial headroom.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the best choice, delivering an average of 129.6 FPS. This is 69.6 FPS above the playable threshold, and no other preset is needed to improve performance.

At 2560x1440, the Ultra preset also provides the best experience, with an average of 84.8 FPS. This is 24.8 FPS above 60 FPS, allowing for a fully maxed-out visual experience without sacrificing smoothness.

At 3840x2160, the High preset is the most demanding that stays at or above 60 FPS, averaging 60.3 FPS. The Medium preset offers higher headroom at 68 FPS, but High is the optimal balance of visual quality and performance, sitting just barely above the threshold.

The Verdict

The verdict by resolution is clear: this PC can run The Technomancer at 60 FPS or above in all but one configuration. At 1920x1080, all four presets are playable, with Ultra averaging 129.6 FPS and Low hitting 232.8 FPS. At 2560x1440, the entire range of presets is playable, with Ultra at 84.8 FPS being the standout. At 3840x2160, the system is playable on Low (89.2 FPS), Medium (68 FPS), and High (60.3 FPS), but the Ultra preset fails to reach 60 FPS at 46.1 FPS.

The Ryzen 5 5600's 74th percentile CPU performance and the RTX 5070's 82nd percentile GPU performance combine to place this system in the 80th percentile of tested combos for this game. For a title from 2016, the hardware is more than adequate for high-refresh-rate gaming at 1080p and 1440p, while 4K gaming requires a slight reduction from Ultra to High settings. The 4K Ultra failure is the only significant limitation, and it is a minor one given the game's age and the system's overall strength.

Similar Performance Alternatives

For the CPU, the nearest rivals based on average benchmark scores are the Intel Core Ultra 7 258V (20454, 0.1% slower), AMD Ryzen 5 8500G (20425, 0.2% slower), AMD EPYC 9454P (20422, 0.2% slower), and AMD EPYC 7713 (20363, 0.5% slower). Any of these processors would deliver nearly identical frame rates in The Technomancer, since the game does not appear to be CPU-limited at higher resolutions, and the differences in synthetic scores are under 1%.

For the GPU, the AMD Radeon Pro 580 (40318, 0.1% slower) and AMD Radeon Pro WX 7100 (40063, 0.8% slower) are the closest matches, followed by the AMD Radeon Pro 5300 (40870, 1.2% faster) and the NVIDIA RTX A500 Mobile (39568, 2% slower). These alternatives would produce similar FPS values at each resolution and preset, though the RTX 5070's 12 GB GDDR7 memory and 672.0 GB/s bandwidth give it a slight edge in memory-intensive scenarios. The 4K High preset at 60.3 FPS would likely be the dividing line: the Radeon Pro 5300 might push slightly higher, while the RTX A500 Mobile could dip just below 60 FPS, based on the 2% synthetic delta. The overall ranking of 736 out of 3696 combos would remain largely unchanged with any of these substitutes, as the 0.5% to 2% performance deltas translate to minimal real-world FPS differences in this game.