Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

77%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
236 FPS
Ultra 1080p Measured
167 FPS

1440p (2K / QHD)

Low 1440p Measured
203 FPS
Ultra 1440p Measured
108 FPS

4K (Ultra HD)

Low 4K Measured
115 FPS
Ultra 4K Measured
60 FPS
4.9ms Frame Time
7ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 20,468
Graphics Card
Required 27,947
Your GPU 60,347

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 60 77 92 115
1440p QHD 108 141 164 203
1080p Full HD 167 203 212 236

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 203
1920x1080 Low 236
1920x1080 Medium 212
1920x1080 Ultra 167
2560x1440 High 141
2560x1440 Low 203
2560x1440 Medium 164
2560x1440 Ultra 108
3840x2160 High 77
3840x2160 Low 115
3840x2160 Medium 92
3840x2160 Ultra 60

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 4090 delivers overwhelming performance in The Technomancer, with every tested resolution and settings combination clearing the 60 FPS playability threshold. This is a combination where the GPU is so far ahead of the game’s demands that even the most demanding preset at 4K stays comfortably above 60 FPS, leaving the CPU as the only potential bottleneck at lower resolutions.

Measured FPS Breakdown

At 3840x2160, the RTX 4090 produces an average of 76.7 FPS on High settings, 91.9 FPS on Medium, and 114.8 FPS on Low. The jump from High to Medium is a 15.2 FPS gain, while dropping from Medium to Low adds another 22.9 FPS. Ultra settings at 4K yield 60.3 FPS average, which is exactly at the playable threshold — this is the only preset in the entire test suite that comes close to dipping below 60 FPS.

Moving to 2560x1440, the performance scales dramatically. High settings deliver 141.1 FPS average, Medium reaches 163.5 FPS, and Low hits 203 FPS. Ultra at 1440p produces 107.6 FPS average, which is 47.3 FPS higher than the same preset at 4K. The scaling from 4K to 1440p on Ultra represents a 78.4% performance increase, indicating that the GPU is heavily resolution-bound at 4K.

At 1920x1080, the results become CPU-limited. Low settings cap out at 236 FPS average, Medium at 212.1 FPS, High at 203 FPS, and Ultra at 167.2 FPS. Notably, the difference between Low and High at 1080p is only 33 FPS, whereas the same comparison at 4K shows a 38.1 FPS difference. The 1080p results suggest that the Ryzen 5 5600 begins to constrain the RTX 4090, particularly at Low settings where the GPU has more headroom than the CPU can feed. The 236 FPS ceiling at 1080p Low is identical to the 203 FPS at 1440p Low, which is a strong indicator that the CPU is the limiting factor in both scenarios.

How This Combo Ranks

This CPU+GPU combination ranks 207th out of 3696 tested combos for The Technomancer, placing it in the top 5.6% of all configurations in the database. The percentile placement reflects the GPU’s dominance: the RTX 4090 sits in the 88th percentile among all GPUs, while the Ryzen 5 5600 sits in the 74th percentile among all CPUs. The rank of 207 is primarily driven by the GPU’s ability to push high frame rates at 4K, where the CPU’s relatively modest standing matters less.

The gap between this combo and the top-ranked configurations is likely attributable to CPU performance at lower resolutions. At 1080p, the Ryzen 5 5600’s six-core, twelve-thread design with a 3.50 GHz base clock and 4.40 GHz boost clock produces frame rates that, while excellent, fall short of what faster CPUs could achieve with the RTX 4090. The combo rank would improve significantly if the game were only tested at 4K, where the GPU dominates the performance equation.

CPU and GPU Roles

The RTX 4090 is the dominant component at 3840x2160. The scaling from 4K Ultra (60.3 FPS) to 1440p Ultra (107.6 FPS) shows a 47.3 FPS improvement, which is a 78.4% gain. This large delta indicates that the GPU is the limiting factor at 4K, and the CPU has ample headroom to feed it. Similarly, 4K High (76.7 FPS) to 1440p High (141.1 FPS) represents an 84% performance increase, further confirming GPU-bound behavior at 4K.

At 2560x1440, the balance shifts. The jump from 1440p Ultra (107.6 FPS) to 1080p Ultra (167.2 FPS) is 59.6 FPS, a 55.4% gain. However, the jump from 1440p Low (203 FPS) to 1080p Low (236 FPS) is only 33 FPS, a 16.3% gain. This compression of gains at Low settings reveals that the CPU begins to matter more as the GPU workload decreases. The Ryzen 5 5600’s 32 MB shared L3 cache and 51.2 GB/s memory bandwidth are sufficient for most scenarios, but the 236 FPS ceiling at 1080p Low suggests a CPU limit.

At 1920x1080, the CPU is the primary constraint. The fact that 1080p Low (236 FPS) and 1440p Low (203 FPS) are only 33 FPS apart, while 1080p Ultra (167.2 FPS) and 1440p Ultra (107.6 FPS) are 59.6 FPS apart, demonstrates that Low settings at any resolution are CPU-bound. The RTX 4090 is capable of far higher frame rates than the Ryzen 5 5600 can deliver, particularly in scenes with many draw calls or physics calculations. The 6-core, 12-thread configuration with a 65 W TDP is adequate for this 2016 title, but it is the limiting factor at 1080p.

The Verdict

This PC can run The Technomancer at every resolution and preset combination tested, and it clears the 60 FPS playable threshold with substantial margin in nearly all cases. At 3840x2160, all four presets are playable, including Ultra at 60.3 FPS average — just barely above the threshold. At 2560x1440, all presets are playable, with Ultra at 107.6 FPS providing a comfortable 47.6 FPS headroom over the 60 FPS target. At 1920x1080, all presets are playable, with Ultra at 167.2 FPS delivering more than 2.7 times the playable threshold.

The verdict is unambiguous: this combination is overkill for The Technomancer. The game’s 2016 release date and modest system requirements mean that even the RTX 4090 at 4K Ultra stays above 60 FPS, and the Ryzen 5 5600 never becomes a serious liability. For 4K gaming, the Ultra preset at 60.3 FPS is the most demanding option that remains playable, but it leaves no headroom for frame rate dips. For 1440p and 1080p, the Ultra preset provides far more performance than necessary, and players could enable additional features like DLSS or higher refresh rate targets without concern.

Similar Performance Alternatives

The Ryzen 5 5600’s nearest CPU rivals, based on average benchmark scores, include the Intel Core Ultra 7 258V (0.1% faster), the AMD Ryzen 5 8500G (0.2% faster), the AMD EPYC 9454P (0.2% faster), and the AMD EPYC 7713 (0.5% faster). All four of these processors would produce nearly identical frame rates in The Technomancer when paired with the RTX 4090, since the game’s CPU demands are modest and the 5600 is already sufficient at all tested resolutions. The EPYC chips are server parts that would be impractical for gaming, but their benchmark scores indicate they would not bottleneck the RTX 4090 any more or less than the 5600.

The RTX 4090’s nearest GPU rivals include the Intel Arc Pro A60 (0% difference), the AMD Radeon Pro Vega 48 (0.3% slower), the AMD Radeon Pro W6600M (2.5% faster), and the AMD Radeon PRO V710 (2.9% slower). These are workstation and professional GPUs rather than gaming cards, but their benchmark scores suggest they would deliver similar frame rates in The Technomancer. The Arc Pro A60, in particular, matches the RTX 4090’s average score almost exactly, which would translate to nearly identical performance in this title. The Radeon Pro W6600M’s 2.5% higher score would give it a slight edge, while the PRO V710 would trail by a similar margin.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which produces an average of 60.3 FPS. This is a razor-thin margin, so players who want headroom for volatile scenes should consider dropping to High at 76.7 FPS. The data shows that Ultra at 4K is technically playable but leaves only 0.3 FPS of cushion above the 60 FPS target.

At 2560x1440, the best settings are Ultra at 107.6 FPS average. This provides a 47.6 FPS buffer over the playable threshold, making it a safe choice for consistent performance. Even in the most demanding scenes, the 107.6 FPS average suggests that dips below 60 FPS would be rare, if they occur at all.

At 1920x1080, the best settings are Ultra at 167.2 FPS average. This is more than 2.7 times the 60 FPS threshold, offering enormous headroom. The 1080p Ultra preset is the clear recommendation for this resolution, as the 167.2 FPS average is high enough to drive a 144 Hz or 165 Hz monitor without issue, and the CPU constraint at Low settings (236 FPS) is not worth the visual downgrade.