Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
128 FPS
Ultra 1080p Measured
67 FPS

1440p (2K / QHD)

Low 1440p Measured
84 FPS
Ultra 1440p Measured
44 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
22 FPS
11.4ms Frame Time
17ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 20,468
Graphics Card
Required 27,947
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 29 38 49
1440p QHD 44 58 62 84
1080p Full HD 67 88 99 128

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 88
1920x1080 Low 128
1920x1080 Medium 99
1920x1080 Ultra 67
2560x1440 High 58
2560x1440 Low 84
2560x1440 Medium 62
2560x1440 Ultra 44
3840x2160 High 29
3840x2160 Low 49
3840x2160 Medium 38
3840x2160 Ultra 22

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 2060 combination delivers a playable experience in The Technomancer at 1080p and 1440p, but falls short of the 60 FPS threshold at 4K across all tested presets. The recorded data shows that the most demanding playable setting at each resolution is determined by the 60 FPS playability threshold, with the system showing clear scaling between resolutions and presets.

Best Settings per Resolution

At 3840x2160, no preset achieves the 60 FPS playability threshold. The highest average frame rate recorded at this resolution is 48.7 FPS on Low settings, which remains below the playable threshold. High settings produce 29.3 FPS, Medium produces 38.3 FPS, and Ultra drops to 21.6 FPS. The database verdict confirms that no playable settings exist at 4K for this combination.

At 2560x1440, the best playable preset is Medium, which delivers an average of 62.4 FPS. This is the only preset at this resolution that clears the 60 FPS mark while offering higher visual quality than the alternative playable option, Low, which runs at 83.8 FPS. High settings at 1440p produce 57.9 FPS, just below the threshold, while Ultra produces 44.2 FPS.

At 1920x1080, all four presets clear the 60 FPS threshold. The most demanding playable preset is Ultra, which achieves an average of 66.8 FPS. High settings run at 88 FPS, Medium runs at 98.5 FPS, and Low runs at 128.4 FPS. The Ultra preset at 1080p represents the highest visual quality setting that maintains playable performance for this configuration.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600 and NVIDIA GeForce RTX 2060 ranks 2940 out of 3696 tested combinations in the database for The Technomancer. This places the combo in the lower portion of the overall ranking, around the 20th percentile of tested systems. The rank reflects the age of the GPU, as the RTX 2060 sits in the 58th percentile among all GPUs in the database, while the Ryzen 5 5600 sits in the 74th percentile among all CPUs. The CPU is substantially stronger relative to its peers than the GPU, which shapes the performance profile seen in the measured frame rates.

The GPU percentile of 58 indicates that the RTX 2060 outperforms a majority of recorded graphics cards, but the demanding nature of The Technomancer at higher resolutions limits the practical ceiling of this combo. At 4K, the system fails all presets despite the CPU having ample headroom, which points to the GPU as the limiting factor. At 1440p and 1080p, the combo finds playable configurations, with 1080p Ultra being the most demanding setting that maintains 60 FPS.

Measured FPS Breakdown

At 3840x2160, the recorded average frame rates are as follows: Low produces 48.7 FPS, Medium produces 38.3 FPS, High produces 29.3 FPS, and Ultra produces 21.6 FPS. The step from Low to Medium costs 10.4 FPS, the step from Medium to High costs 9.0 FPS, and the step from High to Ultra costs 7.7 FPS. The scaling is consistent, with each preset tier reducing performance by a similar margin.

At 2560x1440, Low produces 83.8 FPS, Medium produces 62.4 FPS, High produces 57.9 FPS, and Ultra produces 44.2 FPS. The transition from Low to Medium drops 21.4 FPS, the largest single preset penalty at this resolution. The drop from Medium to High is 4.5 FPS, and the drop from High to Ultra is 13.7 FPS. The Medium preset is the only configuration that sits above 60 FPS while providing more than the lowest visual quality.

At 1920x1080, Low produces 128.4 FPS, Medium produces 98.5 FPS, High produces 88 FPS, and Ultra produces 66.8 FPS. The drop from Low to Medium is 29.9 FPS, from Medium to High is 10.5 FPS, and from High to Ultra is 21.2 FPS. The 1080p results show that even the most demanding preset leaves a comfortable margin above the 60 FPS threshold, with Ultra holding 66.8 FPS on average.

The data shows that the frame rate cost of each preset tier varies by resolution. At 4K, the preset penalties are relatively uniform. At 1440p, the Low to Medium step is the most expensive. At 1080p, the Low to Medium step is also the most expensive, but the system has enough headroom to absorb it. The minimum and maximum frame rates are not recorded in the database, so the analysis relies on average FPS values only.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 5600 in the database are the Intel Core Ultra 7 258V, the AMD Ryzen 5 8500G, the AMD EPYC 9454P, and the AMD EPYC 7713. The Core Ultra 7 258V has an average benchmark score of 20454, which is 0.1% lower than the Ryzen 5 5600's average score of 20468. The Ryzen 5 8500G scores 20425, a 0.2% difference. The EPYC 9454P scores 20422, also a 0.2% difference. The EPYC 7713 scores 20363, a 0.5% difference. All four alternatives are within half a percent of the Ryzen 5 5600's average benchmark score, meaning any of them would deliver nearly identical CPU-bound performance in The Technomancer.

The nearest rivals for the NVIDIA GeForce RTX 2060 are the NVIDIA GeForce GTX 580, the AMD Radeon 680M, the NVIDIA GeForce RTX 3050 OEM, and the AMD Radeon RX 7600. The GTX 580 has an average score of 15283, which is effectively identical to the RTX 2060's 15290, a 0% difference. The Radeon 680M scores 15270, a 0.1% difference. The RTX 3050 OEM scores 15199, a 0.6% difference. The Radeon RX 7600 scores 15171, a 0.8% difference. Any of these GPUs would produce nearly the same frame rates as the RTX 2060 in this game, since their aggregate benchmark scores are within a single percentage point.

The practical implication is that swapping the CPU for any of its nearest rivals would not meaningfully change the measured FPS in The Technomancer, given the CPU's 0.1% to 0.5% score differences. Similarly, swapping the GPU for any of its nearest rivals would produce frame rates within a rounding error of the RTX 2060's results. The combo rank of 2940 out of 3696 would remain essentially unchanged with any of these substitutions.

CPU and GPU Roles

The recorded data shows that the GPU is the dominant factor at higher resolutions, while the CPU provides sufficient headroom even at the most demanding settings. At 3840x2160, the system fails to hit 60 FPS on any preset, with Ultra dropping to 21.6 FPS. The Ryzen 5 5600, which ranks in the 74th percentile among all CPUs, is unlikely to be the bottleneck at 4K. The RTX 2060, which ranks in the 58th percentile among all GPUs, is the limiting component.

The scaling between resolutions confirms this. At 1080p Ultra, the system produces 66.8 FPS. At 1440p Ultra, it produces 44.2 FPS, a drop of 22.6 FPS. At 4K Ultra, it produces 21.6 FPS, a drop of another 22.6 FPS. The near-linear frame rate decline with resolution scaling is characteristic of a GPU-bound scenario. If the CPU were the limiting factor, the frame rate would stay relatively flat as resolution increased, since the CPU work is largely independent of resolution.

The preset scaling further supports this interpretation. At 1080p, the difference between Low and Ultra is 61.6 FPS, from 128.4 FPS down to 66.8 FPS. At 1440p, the difference is 39.6 FPS, from 83.8 FPS down to 44.2 FPS. At 4K, the difference is 27.1 FPS, from 48.7 FPS down to 21.6 FPS. The shrinking absolute gap between presets at higher resolutions indicates that the GPU is becoming progressively more saturated, leaving less headroom for visual quality improvements to cost performance.

The CPU's role is best seen at 1080p Low, where the system reaches 128.4 FPS. This high frame rate shows that the Ryzen 5 5600 can feed the GPU well beyond the 60 FPS threshold when the GPU is not under heavy load. The CPU benchmarks support this, with a Cinebench R23 multicore score of 18309 and a single-core score of 2584, both indicating strong performance for a six-core processor. The 3DMark single-thread score of 882 and 2-thread score of 1737 suggest that the CPU handles the game's thread requirements without becoming a limiting factor.

At 1440p, the GPU still dominates. The Medium preset produces 62.4 FPS, just above the threshold, while High produces 57.9 FPS. The small gap between Medium and High at this resolution, only 4.5 FPS, suggests that the GPU is nearing its capacity. At 1080p, the GPU has more headroom, which is why the Ultra preset can maintain 66.8 FPS.

FAQ

Q: Can this PC run The Technomancer at 4K?

A: No. The database verdict lists no playable settings at 3840x2160. The highest average FPS at 4K is 48.7 FPS on Low settings, which is below the 60 FPS playability threshold.

Q: What is the best playable setting at 1440p?

A: Medium settings, which produce an average of 62.4 FPS. Low settings also clear the threshold at 83.8 FPS, but Medium offers higher visual quality while remaining above 60 FPS.

Q: What is the best playable setting at 1080p?

A: Ultra settings, which produce an average of 66.8 FPS. All four presets at 1080p clear the 60 FPS threshold, with Low at 128.4 FPS, Medium at 98.5 FPS, and High at 88 FPS.

Q: How does this combo rank among all tested combinations?

A: The combination ranks 2940 out of 3696 tested combos in the database for The Technomancer, placing it in the lower portion of the overall ranking.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the limiting factor. The frame rate drops consistently as resolution increases, from 66.8 FPS at 1080p Ultra to 44.2 FPS at 1440p Ultra to 21.6 FPS at 4K Ultra, which is characteristic of GPU-bound performance. The CPU ranks in the 74th percentile among all CPUs and reaches 128.4 FPS at 1080p Low, indicating it is not the bottleneck.

Q: Which GPUs would perform similarly to the RTX 2060 in this game?

A: The NVIDIA GeForce GTX 580, AMD Radeon 680M, NVIDIA GeForce RTX 3050 OEM, and AMD Radeon RX 7600 all have average benchmark scores within 0.8% of the RTX 2060, so any of them would produce nearly identical frame rates.

The Verdict

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 2060 can run The Technomancer, but the playable range depends heavily on the chosen resolution. At 1920x1080, the system clears the 60 FPS threshold on every preset, with Ultra settings delivering 66.8 FPS on average. This makes 1080p Ultra the most demanding configuration that remains playable. At 2560x1440, the system clears the threshold on Low and Medium presets, with Medium reaching 62.4 FPS. High settings at 1440p fall just short at 57.9 FPS, and Ultra drops to 44.2 FPS. At 3840x2160, no preset reaches 60 FPS, with the best result being 48.7 FPS on Low settings.

The verdict by resolution is clear: 4K is not playable, 1440p is playable up to Medium settings, and 1080p is playable at all settings including Ultra. The combo rank of 2940 out of 3696 reflects the GPU's age, but the measured frame rates show that the system still delivers a smooth experience at the two lower resolutions. For users targeting 1080p, the Ultra preset is the recommended choice, as it stays above 60 FPS while providing the highest visual quality available in the game's settings. For 1440p users, Medium is the ceiling, and for 4K users, the system is not viable for this title.