Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
220 FPS
Ultra 1080p Measured
152 FPS

1440p (2K / QHD)

Low 1440p Measured
191 FPS
Ultra 1440p Measured
100 FPS

4K (Ultra HD)

Low 4K Measured
107 FPS
Ultra 4K Measured
55 FPS
5.3ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 19,593
Graphics Card
Required 27,947
Your GPU 54,247

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 70 82 107
1440p QHD 100 128 149 191
1080p Full HD 152 189 200 220

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 189
1920x1080 Low 220
1920x1080 Medium 200
1920x1080 Ultra 152
2560x1440 High 128
2560x1440 Low 191
2560x1440 Medium 149
2560x1440 Ultra 100
3840x2160 High 70
3840x2160 Low 107
3840x2160 Medium 82
3840x2160 Ultra 55

Performance Analysis: The Technomancer on Your System

Can AMD Ryzen 5 5500 + NVIDIA GeForce RTX 4080 run The Technomancer? Yes, this combination delivers strong performance across all tested resolutions. The data shows 70 FPS at 4K High, 128 FPS at 1440p High, and 189 FPS at 1080p High, with the RTX 4080 clearly dominating the workload. The pairing ranks in the top 11% of all tested combos for this game, making it a very capable setup for this Action RPG.

Measured FPS Breakdown

At 3840x2160, the measured results show a clear progression. Low settings produce an average of 107 FPS. Medium settings average 82 FPS, with a minimum of 70 FPS and a maximum of 94 FPS. High settings average 70 FPS, which sits right at the playable threshold of 60 FPS. The most demanding preset, Ultra, drops to an average of 55 FPS, which falls below the playable threshold. The gap between Low and Ultra at 4K is 52 FPS, indicating that the GPU is handling the resolution scaling efficiently.

Moving to 2560x1440, the performance headroom becomes substantial. Low settings hit an average of 191 FPS. Medium settings average 149 FPS, with a minimum of 127 FPS and a maximum of 172 FPS. High settings average 128 FPS, and even the most demanding Ultra preset maintains a strong 100 FPS average. The difference between Low and Ultra at 1440p is 91 FPS, showing that the RTX 4080 has plenty of spare capacity at this resolution.

At 1920x1080, the results are exceptionally high. Low settings reach an average of 220 FPS. Medium settings average 200 FPS, with a minimum of 170 FPS and a maximum of 230 FPS. High settings average 189 FPS, while Ultra still delivers a robust 152 FPS average. The spread from Low to Ultra at 1080p is 68 FPS, which is narrower than at 1440p, suggesting the CPU begins to place a relative limit on maximum frame rates at this lower resolution.

Across all resolutions, the Medium preset provides the only data with minimum and maximum FPS values. At 4K, the 70 FPS minimum confirms that even the worst-case frame time stays above the playable threshold. At 1440p, the 127 FPS minimum still leaves massive headroom. At 1080p, the 170 FPS minimum ensures an exceptionally smooth experience. The data set lacks min/max values for Low, High, and Ultra presets, so the analysis relies on average FPS for those settings.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High. The data shows 70 FPS average at High settings. While Medium offers a higher 82 FPS average, High is the better choice for visual quality while still maintaining a comfortable margin above the 60 FPS threshold. The Ultra preset at 55 FPS cannot be recommended for consistent 4K play.

At 2560x1440, all four presets clear the 60 FPS threshold. The best setting is Ultra, which delivers a 100 FPS average. This gives the player full access to the game's highest visual fidelity while retaining enough frame rate headroom for smooth gameplay. Even the minimum FPS at Medium settings (127 FPS) is more than double the playable threshold.

At 1920x1080, the best setting is also Ultra, with a 152 FPS average. This is the highest preset available, and it still leaves substantial performance margin. The 170 FPS minimum at Medium settings indicates that even the worst-case frame dips stay far above the 60 FPS playable threshold. Players should have no concerns about frame rate stability at this resolution.

The verdict data confirms these choices: High is listed as the best 4K setting at 70 FPS, while Ultra is the best setting at both 1440p (100 FPS) and 1080p (152 FPS).

CPU and GPU Roles

The measured FPS data reveals how the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4080 share the workload in The Technomancer. At 4K, the scaling between Low and High settings is substantial: 107 FPS to 70 FPS, a 37 FPS drop. This indicates the GPU is the primary bottleneck at this resolution, as increasing graphical load directly reduces frame rates. The RTX 4080's 48.74 TFLOPS of FP32 compute and 716.8 GB/s memory bandwidth are clearly being exercised.

At 1440p, the pattern continues but with more headroom. The 191 FPS at Low settings versus 100 FPS at Ultra shows a 91 FPS swing. This large delta suggests the GPU still dominates performance scaling, but the CPU's 6 cores and 12 threads are sufficient to feed the RTX 4080 at these frame rates. The Ryzen 5 5500's single-thread score of 836 in 3dmark and 2319 in Cinebench R23 indicate adequate per-core performance for this 2016 title.

At 1080p, the scaling pattern shifts. Low settings hit 220 FPS, but Ultra only drops to 152 FPS — a 68 FPS difference. This narrower gap compared to 1440p suggests the CPU starts to become a more significant factor at very high frame rates. The Ryzen 5 5500's passmark single-thread score of 3058 and its 3dmark 2-thread score of 1645 reveal that while the CPU is capable, it can limit maximum frame rates when the GPU is not fully stressed. The fact that 1080p Low (220 FPS) is only 29 FPS higher than 1440p Low (191 FPS), despite the large resolution difference, points to CPU limitations at extreme frame rates.

In contrast, the GPU's role is more pronounced at higher resolutions. The RTX 4080's nearest rival data shows only a 0.1% delta against the RTX 4080 SUPER and a -2.6% delta against the AMD Radeon RX 6750 GRE 12 GB. This GPU is positioned near the top of its class, with an 86th percentile ranking among all GPUs. The combination of a mid-range CPU with a high-end GPU means the system is GPU-bound at 4K and increasingly CPU-bound at 1080p.

FAQ

Q: Can this system run The Technomancer at 4K with maximum settings?

A: No. The data shows 55 FPS average at 3840x2160 Ultra, which falls below the 60 FPS playable threshold. The highest playable 4K preset is High, which delivers 70 FPS.

Q: What is the best resolution for this combination?

A: The verdict data lists all four presets as playable at both 2560x1440 and 1920x1080. At 1440p, Ultra delivers 100 FPS, while at 1080p, Ultra delivers 152 FPS. Both resolutions offer excellent performance, with 1440p providing the best balance of visual quality and frame rate.

Q: How does the Ryzen 5 5500 compare to its closest rivals?

A: The CPU's average benchmark score of 19593 is nearly identical to the AMD Ryzen AI 5 430 (19617, -0.1% delta). It slightly outperforms the Intel Core i7-10700F (19499, +0.5% delta) and trails the Intel Core i5-12500 (19668, -0.4% delta) and Intel Core i5-11600KF (19723, -0.7% delta). The differences are minimal, all within 0.7%.

Q: Is the RTX 4080's performance consistent with its rivals?

A: The GPU's average benchmark score of 54247 is nearly identical to the RTX 4080 SUPER (54209, +0.1% delta). It trails the AMD Radeon Pro W5700X (54828, -1.1% delta), AMD Radeon RX 6750 GRE 12 GB (55698, -2.6% delta), and AMD Radeon 8060S (55757, -2.7% delta) by small margins. These differences are within 3% and unlikely to be noticeable in practice.

Q: What frame rates can be expected at Medium settings?

A: At 4K, Medium averages 82 FPS with a minimum of 70 FPS and maximum of 94 FPS. At 1440p, Medium averages 149 FPS with a minimum of 127 FPS and maximum of 172 FPS. At 1080p, Medium averages 200 FPS with a minimum of 170 FPS and maximum of 230 FPS.

Q: Does the CPU bottleneck the GPU at any resolution?

A: The data suggests some CPU limitation at 1080p. The 1080p Low setting (220 FPS) is only 29 FPS higher than 1440p Low (191 FPS), which is a smaller improvement than expected from the resolution reduction. The 1440p Ultra to 1080p Ultra delta (100 to 152 FPS, a 52 FPS gain) is also modest, indicating the CPU can constrain maximum frame rates when the GPU has headroom.

How This Combo Ranks

This specific combination of AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4080 ranks 378th out of 3696 tested combinations for The Technomancer. This places the setup in the top 10.2% of all tested configs. The rank reflects the strong GPU performance, with the RTX 4080 sitting at the 86th percentile among all GPUs. The CPU, at the 73rd percentile among all CPUs, is the weaker component but still well above average.

The ranking makes sense given the game's age (released in 2016) and the hardware's modern capabilities. The RTX 4080 is clearly the dominant component, as evidenced by the GPU-heavy workload at 4K. The Ryzen 5 5500's 6-core, 12-thread configuration provides adequate support without becoming a major bottleneck except at very high frame rates. The 378th rank out of 3696 means there are only 377 tested combinations that perform better, largely consisting of systems with even newer or higher-tier CPUs paired with similar or better GPUs.

The Verdict

Yes, this PC can run The Technomancer, and it does so with strong results. The verdict data confirms playable performance at all three tested resolutions, but with important distinctions. At 3840x2160, the playable settings are High (70 FPS), Low (107 FPS), and Medium (82 FPS), with Ultra falling below the 60 FPS threshold at 55 FPS. The best 4K experience is High settings, which balances visual quality with a comfortable 10 FPS margin above the playable threshold.

At 2560x1440, every preset clears 60 FPS. The best setting is Ultra at 100 FPS, giving players access to maximum visual fidelity with substantial frame rate headroom. Even the most demanding settings leave a 40 FPS buffer above the playable threshold. At 1920x1080, the best setting is also Ultra, delivering 152 FPS. This means the system can push well beyond standard 60 FPS displays, making it suitable for high refresh rate monitors.

The practical takeaway is that this combination is best suited for 1440p gaming with Ultra settings, where it delivers 100 FPS. At 4K, players must compromise to High settings for smooth gameplay. At 1080p, the system is overkill for 60 FPS play but excellent for high refresh rate gaming. The data shows this is a capable pairing for The Technomancer, with the RTX 4080 providing the bulk of the performance and the Ryzen 5 5500 doing its job without major issues.