Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
184 FPS
Ultra 1080p Measured
145 FPS

1440p (2K / QHD)

Low 1440p Measured
160 FPS
Ultra 1440p Measured
103 FPS

4K (Ultra HD)

Low 4K Measured
111 FPS
Ultra 4K Measured
57 FPS
6.3ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 17,035
Graphics Card
Required 27,947
Your GPU 56,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 57 73 85 111
1440p QHD 103 132 145 160
1080p Full HD 145 158 167 184

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 158
1920x1080 Low 184
1920x1080 Medium 167
1920x1080 Ultra 145
2560x1440 High 132
2560x1440 Low 160
2560x1440 Medium 145
2560x1440 Ultra 103
3840x2160 High 73
3840x2160 Low 111
3840x2160 Medium 85
3840x2160 Ultra 57

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 3600 and NVIDIA GeForce RTX 5080 combination delivers exceptional performance in The Technomancer, a 2016 Action RPG. The recorded data shows this pairing clears the 60 FPS playable threshold at every resolution tested, with only the Ultra preset at 3840x2160 falling short of that mark. This is a dominant result, placing the combo at rank 630 out of 3696 tested combinations, putting it in the top 17% of all systems measured for this game. The RTX 5080, with its Blackwell 2.0 architecture and 16 GB of GDDR7 memory, provides the overwhelming majority of the rendering power, while the Ryzen 5 3600, a Zen 2 six-core processor with 12 threads, proves entirely sufficient for the game’s CPU demands.

Measured FPS Breakdown

The benchmark data provides complete FPS measurements for three resolutions (1920x1080, 2560x1440, and 3840x2160) across four preset levels (Low, Medium, High, and Ultra). The table below summarizes the recorded average FPS, with minimum and maximum FPS where available.

At 1920x1080, the results are uniformly high. The Low preset delivers an average of 184 FPS, the highest recorded at this resolution. Medium averages 167 FPS with a minimum of 142 and a maximum of 193. High averages 158 FPS. Ultra averages 145 FPS. Every preset at 1080p stays far above the 60 FPS threshold, with even the most demanding Ultra setting maintaining a 145 FPS average, leaving substantial headroom for any additional background tasks or future driver overhead.

At 2560x1440, performance remains strong but begins to show the expected scaling from the higher pixel count. Low averages 160 FPS. Medium averages 145 FPS with a minimum of 124 and a maximum of 167. High averages 132 FPS. Ultra averages 103 FPS. The transition from 1080p to 1440p reduces the Ultra average by 42 FPS, from 145 to 103, a 29% drop. The High preset drops by 26 FPS, from 158 to 132, a 16% reduction. Low and Medium show smaller absolute declines, with Low dropping 24 FPS and Medium dropping 22 FPS. All four presets remain above 100 FPS at 1440p, indicating the GPU is still not fully saturated.

At 3840x2160, 4K resolution brings the most significant performance cost. Low averages 111 FPS. Medium averages 85 FPS with a minimum of 72 and a maximum of 98. High averages 73 FPS. Ultra averages 57 FPS, which is the only measured result below the 60 FPS playable threshold. The scale from 1440p to 4K is substantial: Ultra drops from 103 to 57 FPS, a 45% reduction. High drops from 132 to 73 FPS, a 45% reduction as well. Medium drops from 145 to 85 FPS, a 41% reduction. Low drops from 160 to 111 FPS, a 31% reduction. These figures demonstrate that the RTX 5080, while extremely powerful, still faces a steep challenge at native 4K with the Ultra preset in this game.

The available minimum and maximum FPS data points offer additional insight. At 3840x2160 Medium, the minimum of 72 FPS and maximum of 98 FPS show a range of 26 FPS, with the average sitting at 85. At 2560x1440 Medium, the minimum is 124, the maximum is 167, and the average is 145, a range of 43 FPS. At 1920x1080 Medium, the minimum is 142, the maximum is 193, and the average is 167, a range of 51 FPS. This widening range at lower resolutions suggests that CPU frame pacing or scene complexity introduces more variance when the GPU is not the primary bottleneck. The data shows that at 4K, the GPU is more consistently near its limit, producing a tighter FPS band.

The overall pattern is clear: this system scales predictably with resolution, and the 60 FPS threshold is only violated by the single Ultra/4K measurement. Every other combination of resolution and preset exceeds the threshold, many by a wide margin.

Best Settings per Resolution

The database’s verdict by resolution identifies the most demanding preset that still maintains an average of 60 FPS or higher at each resolution.

At 3840x2160, the best playable setting is High, which achieves an average of 73 FPS. This is 13 FPS above the 60 FPS threshold. The Medium preset also qualifies with an 85 FPS average, and Low qualifies with 111 FPS. The Ultra preset, at 57 FPS average, does not meet the playable threshold. Therefore, 4K users should select High for the highest visual quality that remains playable. The data indicates that the gap between High and Ultra at this resolution is 16 FPS, from 73 to 57, which may be a meaningful visual trade-off but one that sacrifices frame rate smoothness.

At 2560x1440, the best playable setting is Ultra, with an average of 103 FPS. This is 43 FPS above the threshold. All four presets (Low at 160, Medium at 145, High at 132, Ultra at 103) exceed 60 FPS, so the recommendation is straightforward: enable Ultra for maximum detail. The 103 FPS average provides enough headroom that even demanding scenes, as suggested by the Medium preset’s 124 FPS minimum, should remain comfortably fluid.

At 1920x1080, the best playable setting is also Ultra, with an average of 145 FPS. This is 85 FPS above the threshold. All four presets are far above 60 FPS, with Low at 184, Medium at 167, and High at 158. The Ultra setting at 1080p delivers a 145 FPS average, which is 42 FPS higher than the Ultra average at 1440p and 88 FPS higher than the Ultra average at 4K. For 1080p users, there is no reason to compromise on settings, as even the most demanding preset leaves massive performance in reserve.

The verdict data lists the playable settings for each resolution. For 3840x2160, the playable set is High, Low, and Medium. For 2560x1440, all four are playable. For 1920x1080, all four are playable. This confirms that the system only fails the 60 FPS test in one specific configuration, which is the absolute maximum demand placed on it.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for what other hardware might deliver similar results in this game. These comparisons are based on average benchmark scores and percentage deltas, not direct FPS measurements, but they indicate which components sit in the same performance tier.

The AMD Ryzen 5 3600 has an average benchmark score of 17035, placing it in the 71st percentile of all CPUs. Its nearest rivals are all extremely close in score. The Intel Core i7-1260P scores 17007, which is 0.2% lower. The Intel Core i5-11400 scores 17067, which is 0.2% higher. The AMD EPYC 7573X scores 17070, also 0.2% higher. The AMD EPYC 7742 scores 16998, 0.2% lower. These four rivals bracket the Ryzen 5 3600 within a 72-point spread, which is less than half of one percent. In practical terms for The Technomancer, any of these processors would deliver nearly identical CPU-bound performance. A system with an Intel Core i5-11400, for example, would be expected to produce the same FPS in CPU-limited scenarios, though the GPU would still dominate most scenes. The EPYC server chips, while similar in synthetic scores, may have different memory latency characteristics, but the delta is so small that the game’s performance would be indistinguishable.

The NVIDIA GeForce RTX 5080 has an average benchmark score of 56083, placing it in the 87th percentile of all GPUs. Its nearest rivals are also tightly clustered. The AMD Radeon 8060S scores 55757, which is 0.6% lower. The AMD Radeon RX 6750 GRE 12 GB scores 55698, which is 0.7% lower. The AMD Radeon Pro W5700X scores 54828, which is 2.3% lower. The AMD Radeon RX 9070 GRE scores 57367, which is 2.2% higher. The RTX 5080 sits in the middle of this group. A system swapping the RTX 5080 for an RX 9070 GRE would likely produce FPS figures a few percentage points higher, meaning the 4K Ultra result might improve from 57 to roughly 58 or 59 FPS, still below 60. Conversely, an RX 6750 GRE 12 GB would be expected to produce slightly lower FPS, potentially dropping the 4K High result from 73 to around 72 FPS, still playable. These deltas are small enough that the overall verdict would not change: the system remains playable at 4K High and above, but not at 4K Ultra.

For the combined system, the implication is that any of these rival components would produce a similar experience. The 60 FPS threshold at 4K Ultra remains out of reach even with the slightly faster RX 9070 GRE, and the 4K High setting remains playable even with the slightly slower RX 6750 GRE. The CPU rivals, all within 0.2%, have essentially no effect on the measured outcomes, as the game is clearly GPU-bound at the resolutions tested.

The Verdict

The data answers the question directly: yes, this PC can run The Technomancer, and it does so with substantial margin at nearly every setting combination. The recorded FPS measurements and the verdict by resolution confirm that the system achieves playable performance, defined as an average of 60 FPS or higher, in 11 out of 12 tested configurations.

At 1920x1080, the system is fully playable at all four presets. The Ultra preset averages 145 FPS, High averages 158, Medium averages 167, and Low averages 184. The minimum recorded FPS across all 1080p tests is 142, which comes from the Medium preset, still more than double the 60 FPS threshold. There is no scenario at this resolution where the system approaches the playability limit.

At 2560x1440, the system is also fully playable at all four presets. Ultra averages 103 FPS, High averages 132, Medium averages 145, and Low averages 160. The minimum recorded is 124 from Medium, comfortably above 60. The Ultra preset, while the most demanding, still provides a 43 FPS buffer over the threshold.

At 3840x2160, the system is playable at three of four presets. High averages 73 FPS, Medium averages 85, and Low averages 111. The Ultra preset averages 57 FPS, which is 3 FPS below the threshold. This is the single failure point in the entire measurement set. For 4K users, the recommendation is to use High, which delivers 73 FPS, or Medium, which delivers 85 FPS. The visual difference between High and Ultra may be noticeable, but the frame rate penalty is significant.

The verdict by resolution confirms this analysis. The database lists High as the best setting at 3840x2160 with 73 FPS, Ultra at 2560x1440 with 103 FPS, and Ultra at 1920x1080 with 145 FPS. In all three cases, the best setting provides a margin of at least 13 FPS over the threshold, and in the two lower resolutions, the margin exceeds 40 FPS.

Overall, the system is a strong performer for this game. The 630 rank out of 3696 combos places it in the top 17.0% of all tested systems. The data indicates that the RTX 5080 is the dominant factor, with the Ryzen 5 3600 providing sufficient CPU throughput to avoid bottlenecking at the tested settings.

CPU and GPU Roles

The measured FPS data allows for an analysis of which component matters more at each resolution. The pattern across resolutions and presets reveals whether the game is CPU-bound or GPU-bound in different conditions.

The CPU, the AMD Ryzen 5 3600, has a 6-core, 12-thread configuration with a boost clock of 4.20 GHz. Its benchmark scores, including a Cinebench R23 multicore score of 15045 and a single-core score of 2124, indicate a solid mid-range processor. The GPU, the RTX 5080, has an average benchmark score of 56083, placing it in the 87th percentile. In a game like The Technomancer, an Action RPG from 2016, the rendering load typically scales with resolution, which puts increasing pressure on the GPU rather than the CPU.

The data supports this. At 1920x1080, the Ultra preset averages 145 FPS, while at 2560x1440, it averages 103 FPS, a 42 FPS drop. At 3840x2160, it averages 57 FPS, a further 46 FPS drop. The resolution scaling is steep, indicating that the GPU is the limiting factor. If the CPU were the bottleneck, the FPS would not drop so sharply with increasing resolution, because the CPU workload is largely independent of pixel count. The fact that 4K Ultra drops to 57 FPS, below the playable threshold, while 1080p Ultra runs at 145 FPS, shows that the RTX 5080 is being pushed to its limits at the highest resolution.

Conversely, the CPU’s role is more apparent at lower resolutions and lower presets. At 1920x1080 Low, the system averages 184 FPS. At 2560x1440 Low, it averages 160 FPS. At 3840x2160 Low, it averages 111 FPS. The drop from 1080p Low to 1440p Low is 24 FPS, and from 1440p Low to 4K Low is 49 FPS. Even at Low settings, the GPU still scales with resolution, but the absolute FPS values are high enough that the CPU may start to limit the maximum frame rate. For example, the 184 FPS at 1080p Low is likely near the CPU’s frame pacing limit for this game, as scene complexity and draw calls can tax the six-core processor. The Ryzen 5 3600’s single-thread score of 2562 in Passmark indicates it can drive high frame rates, but it cannot reach the 200 FPS territory that a more modern CPU might allow.

The scaling between presets at a fixed resolution also highlights the GPU’s dominance. At 3840x2160, the difference between Low and Ultra is 54 FPS (111 to 57). At 2560x1440, the difference is 57 FPS (160 to 103). At 1920x1080, the difference is 39 FPS (184 to 145). The fact that the preset scaling is consistent across resolutions, even at 1080p where the CPU is more likely to be involved, suggests that the GPU handles the bulk of the visual effects workload. The RTX 5080’s 10752 shading units and 112 ROPs provide ample parallel processing power for the game’s effects, which scale with graphical fidelity.

The CPU’s bottleneck potential is most evident in the minimum FPS data. At 1920x1080 Medium, the minimum is 142 FPS, while the average is 167. At 2560x1440 Medium, the minimum is 124, and the average is 145. At 3840x2160 Medium, the minimum is 72, and the average is 85. The spread between minimum and average is larger at lower resolutions, with a 25 FPS gap at 1080p, a 21 FPS gap at 1440p, and a 13 FPS gap at 4K. This pattern indicates that at lower resolutions, where the GPU has more headroom, the CPU’s frame time variability becomes more noticeable, causing larger dips in the minimum FPS. At 4K, the GPU is so consistently loaded that it smooths out the frame pacing, reducing the minimum-to-average gap.

In summary, the RTX 5080 is the primary performance driver for this game at all resolutions. The CPU plays a supporting role, enabling high frame rates at 1080p and 1440p but not being the deciding factor in whether the system hits 60 FPS. The single measurement below 60 FPS at 4K Ultra is entirely attributable to the GPU’s rendering limits, not the CPU.

FAQ

Q: Can this PC run The Technomancer at 60 FPS?

A: Yes, in 11 out of 12 tested configurations. The only setting that falls below 60 FPS is the Ultra preset at 3840x2160, which averages 57 FPS. At 1920x1080 and 2560x1440, all four presets exceed 60 FPS, with the lowest average being 103 FPS at 1440p Ultra.

Q: What is the best setting for 4K resolution?

A: The best playable setting at 3840x2160 is High, with an average of 73 FPS. Medium averages 85 FPS and Low averages 111 FPS, but High provides the highest visual quality that remains above the 60 FPS threshold. Ultra averages 57 FPS and is not recommended for 4K play.

Q: How does the system perform at 1080p?

A: At 1920x1080, the system delivers very high frame rates across all presets. Low averages 184 FPS, Medium averages 167 FPS, High averages 158 FPS, and Ultra averages 145 FPS. Even the most demanding Ultra preset provides a 85 FPS margin over the playable threshold.

Q: Which component is more important for this game?

A: The GPU, the NVIDIA GeForce RTX 5080, is the dominant factor. The FPS drops significantly as resolution increases, from 145 FPS at 1080p Ultra to 57 FPS at 4K Ultra, indicating that the GPU is the bottleneck at higher resolutions. The CPU, the AMD Ryzen 5 3600, provides enough performance for high frame rates but does not limit the system at 4K.

Q: What are the nearest rivals to this CPU and GPU?

A: The CPU’s nearest rivals include the Intel Core i7-1260P, which scores 0.2% lower, and the Intel Core i5-11400, which scores 0.2% higher. The GPU’s nearest rivals include the AMD Radeon RX 9070 GRE, which scores 2.2% higher, and the AMD Radeon RX 6750 GRE 12 GB, which scores 0.7% lower.

Q: Is the 4K Ultra setting ever playable?

A: No. The Ultra preset at 3840x2160 averages 57 FPS, which is 3 FPS below the 60 FPS playable threshold. The system does not meet the playability criterion for this specific configuration. Users who want 4K should select High or Medium for a stable frame rate.