Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
184 FPS
Ultra 1080p Measured
119 FPS

1440p (2K / QHD)

Low 1440p Measured
152 FPS
Ultra 1440p Measured
78 FPS

4K (Ultra HD)

Low 4K Measured
84 FPS
Ultra 4K Measured
43 FPS
6.5ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 17,035
Graphics Card
Required 27,947
Your GPU 37,648

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 55 64 84
1440p QHD 78 100 117 152
1080p Full HD 119 153 167 184

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 153
1920x1080 Low 184
1920x1080 Medium 167
1920x1080 Ultra 119
2560x1440 High 100
2560x1440 Low 152
2560x1440 Medium 117
2560x1440 Ultra 78
3840x2160 High 55
3840x2160 Low 84
3840x2160 Medium 64
3840x2160 Ultra 43

Performance Analysis: The Technomancer on Your System

Similar Performance Alternatives

The AMD Ryzen 5 3600 and NVIDIA GeForce RTX 4070 combination sits at rank 1067 out of 3696 tested CPU-GPU pairings in this game, placing it in the upper third of the database. The recorded data shows this pairing comfortably outclasses the majority of systems tested, though the CPU and GPU each have close neighbors that help define their performance envelope.

For the CPU, the Ryzen 5 3600's average benchmark score of 17035 places it at the 71st percentile among all processors. Its nearest rivals are remarkably tight: the Intel Core i7-1260P scores 17007, a delta of just 0.2 percent behind, while the AMD EPYC 7573X scores 17070, a 0.2 percent advantage. The Intel Core i5-11400 sits at 17067, also 0.2 percent ahead, and the AMD EPYC 7742 comes in at 16998, 0.2 percent behind. The practical takeaway is that any of these four processors would deliver virtually indistinguishable frame rates in The Technomancer, as the differences are well within run-to-run variance. The Ryzen 5 3600's Zen 2 architecture with 6 cores and 12 threads provides ample throughput for this Action RPG, and the 32 MB of shared L3 cache helps maintain consistent performance in CPU-bound scenes.

For the GPU, the RTX 4070 posts an average benchmark score of 37648, sitting at the 81st percentile among all graphics cards. Its nearest rivals show a similar clustering pattern. The NVIDIA Tesla P4 scores 37628, a 0.1 percent difference. The AMD Radeon RX Vega 56 scores 37507, trailing by 0.4 percent. The NVIDIA GeForce RTX 4080 Mobile leads by 1.3 percent with a score of 38135, while the AMD Radeon PRO W6400 sits 1.3 percent behind at 37157. The data indicates that in raw compute terms, these four GPUs would produce nearly identical performance in The Technomancer. However, the RTX 4070's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth provide a meaningful advantage at higher resolutions where texture data exceeds what smaller memory pools can hold. The Ada Lovelace architecture's 5888 shading units and 184 texture mapping units handle the game's rendering demands with substantial headroom.

The benchmark results indicate that systems built around any of these rival CPUs or GPUs would deliver similar frame rates, but the specific combination of the Ryzen 5 3600 and RTX 4070 has a slight edge due to the CPU's strong multi-threaded scores and the GPU's large memory allocation. The CPU's Cinebench R23 multicore score of 15045 and single-core score of 2124 suggest it can feed the GPU without becoming a bottleneck, while the GPU's PassMark G3D score of 26927 confirms its ability to push high pixel throughput.

CPU and GPU Roles

The recorded data shows a clear shift in component importance as resolution changes. At 1920x1080, the GPU is the dominant factor, but the CPU still matters for maintaining high frame rates. At 2560x1440, the GPU's workload increases significantly, and at 3840x2160, the GPU becomes the overwhelming constraint.

Examining the scaling from 1920x1080 to 2560x1440 at Medium settings, the average frame rate drops from 167 FPS to 117 FPS, a 30 percent reduction. This corresponds to a 77 percent increase in pixel count, indicating the GPU is the limiting factor. The CPU has more than enough headroom at these settings, as evidenced by the 1920x1080 Low preset hitting 184 FPS, which is well above what the game's engine can realistically sustain without hitting other bottlenecks.

The jump from 2560x1440 to 3840x2160 at Medium settings shows a further decline from 117 FPS to 64 FPS, a 45 percent drop. This is a larger relative decline than the pixel count increase would suggest, confirming that the RTX 4070 is being pushed hard at 4K. The CPU's role diminishes further at this resolution, as the GPU's rendering workload dominates the frame time budget.

Preset scaling provides additional evidence. At 3840x2160, moving from Low to Ultra reduces average FPS from 84 to 43, a 49 percent penalty. At 2560x1440, the same preset range drops from 152 FPS to 78 FPS, a 49 percent penalty as well. At 1920x1080, Low runs at 184 FPS while Ultra runs at 119 FPS, a 35 percent penalty. The smaller relative penalty at 1080p indicates that the CPU begins to matter more at lower resolutions, where the GPU finishes its work quickly and the CPU must keep up with frame delivery.

The data shows that the RTX 4070 is the primary driver of performance in The Technomancer across all tested settings. The Ryzen 5 3600 provides sufficient single-thread performance, with a PassMark single-thread score of 2562, to avoid bottlenecking the GPU at 1080p. However, the CPU's 12 threads and strong multi-core scores, including a PassMark multithread score of 17700, ensure that the game's background simulation and AI routines do not introduce stutter even when frame rates are high.

FAQ

Q: Can this system run The Technomancer at 4K?

A: Yes, but only at Low and Medium settings. The measured data shows 84 FPS average at Low and 64 FPS average at Medium at 3840x2160. High settings drop to 55 FPS average, and Ultra falls to 43 FPS, both below the 60 FPS playable threshold.

Q: What is the best settings preset at 2560x1440?

A: Ultra settings maintain 78 FPS average, which clears the 60 FPS threshold. This is the highest preset tested at this resolution and remains fully playable. Medium settings run at 117 FPS, High at 100 FPS, and Low at 152 FPS.

Q: How does the system perform at 1920x1080?

A: All four tested presets clear 60 FPS. Ultra runs at 119 FPS average, High at 153 FPS, Medium at 167 FPS, and Low at 184 FPS. The lowest recorded frame rate is 142 FPS at Medium settings, which is far above the playable threshold.

Q: What are the minimum frame rates at each resolution?

A: The database only recorded min FPS for Medium settings. At 3840x2160, the minimum is 55 FPS with a maximum of 74 FPS. At 2560x1440, the minimum is 99 FPS and the maximum is 134 FPS. At 1920x1080, the minimum is 142 FPS and the maximum is 193 FPS.

Q: Is the CPU or GPU more important for this game?

A: The GPU dominates performance at all resolutions, but the CPU becomes more relevant at 1080p. The data shows a 35 percent FPS penalty from Low to Ultra at 1080p, compared to 49 percent at both 1440p and 4K. This suggests the CPU helps maintain high frame rates when the GPU is not saturated.

Q: How does this system compare to other tested combinations?

A: This pairing ranks 1067 out of 3696 tested combinations, placing it in the top 29 percent of all systems. The RTX 4070 sits at the 81st percentile among GPUs, and the Ryzen 5 3600 sits at the 71st percentile among CPUs. Nearby rival components show deltas of less than 1.3 percent in average benchmark scores.

The Verdict

The data confirms that this system can run The Technomancer with playable performance at all three tested resolutions, provided the right settings are selected. The verdict by resolution is straightforward: at 3840x2160, Low and Medium settings clear the 60 FPS threshold, with Medium being the best choice at 64 FPS average. At 2560x1440, all four tested presets are playable, with Ultra delivering 78 FPS average as the best option. At 1920x1080, every preset clears 60 FPS, and Ultra runs at 119 FPS average.

The RTX 4070 is clearly the star of this pairing. Its 12 GB of GDDR6X memory and 504.2 GB/s bandwidth give it the capacity to handle 4K textures, and its 29.15 TFLOPS of FP32 compute provides ample raw power. The Ryzen 5 3600, while older, remains a capable partner. Its 6 cores and 12 threads, combined with a 4.20 GHz boost clock, ensure the CPU never becomes the primary bottleneck in this Action RPG.

For players targeting a locked 60 FPS experience, the recommended configuration is Medium settings at 3840x2160, Ultra settings at 2560x1440, or Ultra settings at 1920x1080. The system has enough headroom at 1440p and 1080p to handle demanding scenes without dropping below the playable threshold, and even at 4K Medium, the minimum recorded frame rate of 55 FPS is close enough to 60 that occasional dips will be minor.

The rank of 1067 out of 3696 combinations, placing this system in the top 29 percent, reinforces the conclusion that this is a strong setup for The Technomancer. Players who prioritize visual fidelity should play at 2560x1440 with Ultra settings, while those who want the highest frame rates should use 1920x1080 with Low settings for 184 FPS average.

Measured FPS Breakdown

The database contains 12 measured FPS data points across four settings presets and three resolutions. The following breakdown presents the exact recorded values.

At 3840x2160, the highest resolution tested, the RTX 4070 and Ryzen 5 3600 produce the following averages: Low settings run at 84 FPS, Medium at 64 FPS, High at 55 FPS, and Ultra at 43 FPS. The only preset with min and max data is Medium, which records 55 FPS minimum and 74 FPS maximum. The gap between Low and Medium is 20 FPS, while the gap between Medium and High is 9 FPS, and High to Ultra is 12 FPS. This indicates that the largest performance penalty occurs when moving from Low to Medium, while the High to Ultra step is also significant.

At 2560x1440, the averages are substantially higher: Low runs at 152 FPS, Medium at 117 FPS, High at 100 FPS, and Ultra at 78 FPS. The Medium preset shows a minimum of 99 FPS and a maximum of 134 FPS. The scaling from Low to Medium costs 35 FPS, Medium to High costs 17 FPS, and High to Ultra costs 22 FPS. All presets remain well above the 60 FPS playable threshold, with Ultra maintaining a comfortable 18 FPS margin.

At 1920x1080, the system delivers its highest frame rates: Low runs at 184 FPS, Medium at 167 FPS, High at 153 FPS, and Ultra at 119 FPS. The Medium preset records a minimum of 142 FPS and a maximum of 193 FPS. The preset penalties are smaller in absolute terms: Low to Medium costs 17 FPS, Medium to High costs 14 FPS, and High to Ultra costs 34 FPS. The High to Ultra step is the largest single penalty at this resolution, reflecting the demanding nature of Ultra settings on the GPU.

Comparing across resolutions at the same preset, the data shows consistent scaling. At Low settings, the system delivers 184 FPS at 1080p, 152 FPS at 1440p, and 84 FPS at 4K. At Medium settings, the values are 167, 117, and 64 FPS respectively. At High settings, the values are 153, 100, and 55 FPS. At Ultra settings, the values are 119, 78, and 43 FPS. The 4K to 1440p ratio is roughly 1.8 to 2.0 times higher FPS at 1440p, while the 1440p to 1080p ratio is approximately 1.2 to 1.5 times higher at 1080p, depending on the preset.

Best Settings per Resolution

The optimal settings for each resolution are determined by selecting the most demanding preset that maintains an average frame rate at or above 60 FPS.

At 3840x2160, the best playable preset is Medium, which delivers 64 FPS average. This is the only preset above 60 FPS apart from Low, which runs at 84 FPS but offers reduced visual quality. High settings fall short at 55 FPS, and Ultra is not viable at 43 FPS. The Medium preset's minimum recorded frame rate of 55 FPS indicates occasional dips below 60, but the average remains solidly in playable territory. Players who prioritize smoothness over visual fidelity can choose Low for 84 FPS, but Medium provides the best balance of image quality and performance at 4K.

At 2560x1440, the best playable preset is Ultra, which delivers 78 FPS average. All four presets clear the 60 FPS threshold, so the choice comes down to visual quality. Ultra at 78 FPS provides a 30 percent margin above the playable threshold, ensuring consistent performance even in demanding scenes. The Medium preset's minimum of 99 FPS shows that even the lower presets have substantial headroom, but Ultra is the recommended choice for players with 1440p displays who want the full visual experience.

At 1920x1080, the best playable preset is Ultra, which delivers 119 FPS average. This is nearly double the playable threshold, providing an exceptional experience for players with high refresh rate monitors. The Medium preset's minimum of 142 FPS confirms that the system never drops below 60 FPS at this resolution, even in the most demanding moments. Ultra at 119 FPS is the clear recommendation, as the high frame rate ensures smooth gameplay while maintaining maximum visual fidelity.

In summary, the data indicates that this system's sweet spot is 2560x1440 with Ultra settings, where it delivers 78 FPS average with a comfortable margin above the playable threshold. At 4K, Medium settings are the ceiling, and at 1080p, the system has enough power to run Ultra with frame rates approaching 120 FPS. Players should adjust their settings based on their display's native resolution and their personal preference for visual quality versus frame rate headroom.