Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

50%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
184 FPS
Ultra 1080p Measured
98 FPS

1440p (2K / QHD)

Low 1440p Measured
125 FPS
Ultra 1440p Measured
64 FPS

4K (Ultra HD)

Low 4K Measured
69 FPS
Ultra 4K Measured
35 FPS
8ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 17,035
Graphics Card
Required 27,947
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 45 53 69
1440p QHD 64 82 96 125
1080p Full HD 98 125 147 184

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 125
1920x1080 Low 184
1920x1080 Medium 147
1920x1080 Ultra 98
2560x1440 High 82
2560x1440 Low 125
2560x1440 Medium 96
2560x1440 Ultra 64
3840x2160 High 45
3840x2160 Low 69
3840x2160 Medium 53
3840x2160 Ultra 35

Performance Analysis: The Technomancer on Your System

Measured FPS Breakdown

The recorded data for this pairing shows a wide spread of performance across the three tested resolutions, with the most demanding configuration dropping below the 60 FPS threshold while the least demanding climbs toward nearly three times that mark.

At 1920x1080, the system is clearly never strained. Low settings produce an average of 184 FPS, which is the highest recorded figure in the entire dataset. Medium settings still deliver 147 FPS on average, with a minimum of 125 FPS and a maximum of 169 FPS. High settings drop to 125 FPS average, and even Ultra settings maintain a strong 98 FPS average. Every preset at this resolution clears the 60 FPS playability threshold by a substantial margin, and the gap between the lowest and highest presets is 86 FPS, indicating that the GPU has significant headroom even when visual fidelity is maximized.

Moving to 2560x1440, the performance curve remains healthy but the scaling is visible. Low settings yield 125 FPS average, identical to the 1080p High result. Medium settings produce 96 FPS average with a minimum of 82 FPS and a maximum of 110 FPS. High settings sit at 82 FPS average, and Ultra still clears the threshold at 64 FPS average. The drop from 1080p Ultra to 1440p Ultra is 34 FPS, which shows that the added pixel count takes a meaningful toll on the rendering pipeline. All four presets remain above 60 FPS, but Ultra at 1440p is the closest call in this resolution band, with only 4 FPS of headroom above the playability mark.

At 3840x2160, the situation changes dramatically. Low settings produce 69 FPS average, which is the only preset at this resolution to clear 60 FPS. Medium settings fall to 53 FPS average, with a minimum of 45 FPS and a maximum of 61 FPS. High settings drop further to 45 FPS average, and Ultra bottoms out at 35 FPS average. The spread from Low to Ultra at 4K is 34 FPS, mirroring the absolute delta seen between 1080p Ultra and 1440p Ultra, but here the entire upper half of the preset range lands below the playability threshold. The Medium preset at 4K is particularly notable: its maximum of 61 FPS shows that the system can occasionally touch playable territory, but the average and minimum both sit well below it.

Similar Performance Alternatives

The database places the AMD Ryzen 5 3600 in the 71st percentile of all CPUs, with an average benchmark score of 17035. Its nearest rivals are tightly clustered. The Intel Core i7-1260P scores 17007, which is 0.2% lower, while the AMD EPYC 7742 also scores 16998, another 0.2% difference. On the other side, the Intel Core i5-11400 scores 17067, 0.2% higher, and the AMD EPYC 7573X reaches 17070, also 0.2% higher. These deltas are negligible in real-world gaming terms, so any of these processors would deliver effectively identical CPU-bound behavior in The Technomancer. The Ryzen 5 3600 sits right in the middle of a four-way statistical tie.

For the GPU, the NVIDIA GeForce RTX 3070 holds the 61st percentile of all GPUs, with an average benchmark score of 17208. Its nearest rivals show slightly wider but still modest gaps. The AMD Radeon RX 7600 XT scores 17083, 0.7% lower, and the NVIDIA GeForce GTX 690 scores 17037, 1.0% lower. The AMD Radeon HD 7970M scores 17019, 1.1% lower. On the upper side, the NVIDIA Tesla K40c scores 17468, which is 1.5% higher. None of these differences would produce a perceptible FPS change in most scenarios, though the Tesla K40c is a compute-oriented part that would not behave like a gaming GPU in practice. The RX 7600 XT is the most relevant gaming alternative here, and its near-identical score suggests it would land within a few FPS of the RTX 3070 across the preset range.

CPU and GPU Roles

The scaling between resolutions and presets reveals which component is carrying the load at each tier. The Ryzen 5 3600 has a multi-threaded benchmark score of 17700 in PassMark and a single-thread score of 2562, with a Cinebench R23 multi-core result of 15045. The RTX 3070, meanwhile, posts a PassMark G3D score of 22214 and an OpenCL score of 112821. These raw numbers suggest a balanced pairing, but the game data shows the GPU becoming the dominant constraint as resolution rises.

At 1920x1080, the difference between Low and Ultra is 86 FPS, which is the largest absolute spread in the dataset. This wide gap indicates that the GPU has plenty of spare capacity at lower presets, and the CPU is likely setting the ceiling. The 184 FPS Low result approaches what a 6-core, 12-thread Zen 2 processor can feed into the rendering pipeline. At 2560x1440, the Low to Ultra spread narrows to 61 FPS, and at 3840x2160 it narrows further to 34 FPS. As pixel count increases, the GPU's fill rate and memory bandwidth become the limiting factors, and the CPU's role diminishes.

The 4K results are the clearest evidence of GPU-bound behavior. The RTX 3070 has 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s of bandwidth, and its 20.31 TFLOPS of FP32 compute. At 3840x2160, even the Medium preset only manages 53 FPS average, which is far below what the CPU could deliver if it were the bottleneck. The Ultra preset at 4K falls to 35 FPS, a figure that aligns with GPU compute and memory constraints rather than any processor limitation. Conversely, the 1080p Low result of 184 FPS is likely near the practical ceiling for this CPU in this game, since the GPU would be nowhere near its limit at that resolution and preset combination.

How This Combo Ranks

The database ranks this specific CPU and GPU combination at position 1625 out of 3696 tested combos for The Technomancer. That places it in the upper portion of the field, roughly in the 56th percentile of all pairings tested. The ranking reflects the fact that the RTX 3070 is a strong GPU with a 61st percentile standing, while the Ryzen 5 3600 sits at the 71st percentile among CPUs. The combination lands slightly below the GPU's individual percentile, which is consistent with the CPU becoming a limiting factor at lower resolutions where frame rates are high.

Given that 3696 combos are in the database, a rank of 1625 means more than 2000 tested configurations are slower, but also that over 1600 are faster. The systems ahead of this pairing would typically feature newer GPUs with higher memory bandwidth or more recent CPU architectures with better single-thread performance. The 1080p results, where the CPU matters most, show that the Ryzen 5 3600's single-thread score of 2562 in PassMark and 2124 in Cinebench R23 keep it competitive, but not at the very top of the stack.

The Verdict

This PC can run The Technomancer, but the answer depends entirely on the target resolution. At 1920x1080, every preset clears 60 FPS. The lowest average in this category is 98 FPS at Ultra, which means the system has substantial headroom even in demanding scenes. At 2560x1440, all four presets also clear 60 FPS, with Ultra at 64 FPS average being the only one with a narrow margin. At 3840x2160, only the Low preset is playable, producing 69 FPS average. Medium falls to 53 FPS, High to 45 FPS, and Ultra to 35 FPS, all below the playability threshold.

The verdict by resolution is clear. For 1080p and 1440p, the system is fully capable of running the game at maximum visual settings while maintaining 60 FPS or better. For 4K, the user must choose between playability and visual quality, since only the Low preset meets the threshold. The 4K Medium result, with an average of 53 FPS and a minimum of 45 FPS, would produce noticeable stutter during heavy action, so it is not recommended for a smooth experience.

FAQ

Q: What is the average FPS at 1920x1080 with Ultra settings?

A: The average FPS is 98, which clears the 60 FPS playability threshold by 38 FPS.

Q: Is 2560x1440 playable at Ultra settings?

A: Yes, the average FPS at 1440p Ultra is 64, which is 4 FPS above the 60 FPS threshold.

Q: Can this system run the game at 3840x2160 with Medium settings?

A: No, the average FPS at 4K Medium is 53, with a minimum of 45 FPS and a maximum of 61 FPS, so it falls below the playability threshold on average.

Q: Which preset at 3840x2160 is the most demanding that stays at or above 60 FPS?

A: Low settings, with an average of 69 FPS, is the only 4K preset that clears 60 FPS.

Q: How does the Ryzen 5 3600 compare to the Intel Core i5-11400 in average benchmark score?

A: The Ryzen 5 3600 scores 17035, which is 0.2% lower than the Core i5-11400's 17067.

Q: What is the combo rank of this CPU and GPU pairing in The Technomancer?

A: The combination ranks 1625 out of 3696 tested combos in the database.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 98 FPS. This gives the user maximum visual quality with substantial headroom, so there is no reason to lower any settings at this resolution.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is also Ultra, with an average of 64 FPS. The margin is thinner than at 1080p, but it still clears the threshold. Users who prefer a larger buffer against frame drops could step down to High, which averages 82 FPS, but it is not strictly necessary.

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, with an average of 69 FPS. This is the only playable option at 4K. Medium falls to 53 FPS, High to 45 FPS, and Ultra to 35 FPS, so any visual upgrade beyond Low sacrifices the 60 FPS target. The 4K Low setting represents a significant compromise in fidelity, but it is the only way to maintain smooth gameplay at that resolution with this hardware.