Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 58 | 73 | 90 | 114 |
| 1440p QHD | 103 | 120 | 125 | 142 |
| 1080p Full HD | 129 | 140 | 145 | 162 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 5080 produces a broad spread of frame rates across The Technomancer, depending on resolution and preset. The recorded data shows that this combination is capable of exceeding the 60 FPS playable threshold in most scenarios, though the heaviest 4K Ultra setting falls short. Below is a detailed breakdown of the measured average FPS at each resolution and settings level.
Measured FPS Breakdown
At 1920x1080, the combination delivers its highest frame rates. With Low settings, the average FPS reaches 162.3. Moving to Medium settings reduces the average to 145.4, while High settings yield 139.5 FPS. The most demanding preset at this resolution, Ultra, still maintains an average of 128.5 FPS. All four settings levels at 1080p clear the 60 FPS playable threshold by a substantial margin, with even the lowest recorded average (Ultra at 128.5) being more than double the playable baseline.
At 2560x1440, the performance remains strong but shows a clear step down from 1080p. Low settings produce an average of 141.5 FPS, which is only about 13% lower than the same preset at 1080p. Medium settings average 124.8 FPS, while High settings average 119.6 FPS. Ultra settings at 1440p deliver 103 FPS on average. The gap between Low and Ultra at this resolution is 38.5 FPS, indicating that the preset selection has a meaningful impact on performance. Every setting at 1440p remains well above the 60 FPS threshold.
At 3840x2160, the performance drops more significantly. Low settings still achieve a healthy 114 FPS average. Medium settings average 89.5 FPS, and High settings average 73.4 FPS. However, Ultra settings at 4K fall below the playable threshold, with an average of 58.2 FPS. This is the only measured configuration in the entire dataset that fails to reach 60 FPS. The difference between Low and Ultra at 4K is 55.8 FPS, which is a larger absolute gap than at either lower resolution. The scaling from 1440p to 4K is notable: at High settings, the average drops from 119.6 FPS to 73.4 FPS, a reduction of 46.2 FPS. At Low settings, the drop is from 141.5 FPS to 114 FPS, a reduction of 27.5 FPS.
The data indicates that the RTX 5080 provides enough raw graphics throughput to handle The Technomancer at high frame rates through most of the tested range. The CPU, a Ryzen 5 2600 with 6 cores and 12 threads, appears to be a secondary factor at lower resolutions and settings, where the GPU is likely the primary driver. At 4K Ultra, the combination falls short by 1.8 FPS, which is a marginal miss but still a miss.
FAQ
Q: Can this PC run The Technomancer at 60 FPS on a 4K monitor?
A: Yes, but not at the highest preset. At 3840x2160, the measured average FPS is 114 on Low, 89.5 on Medium, and 73.4 on High. All three of these settings clear the 60 FPS threshold. At Ultra, the average drops to 58.2 FPS, which is below the playable mark.
Q: What is the best preset at 2560x1440 for this combination?
A: The data shows that Ultra settings at 1440p achieve an average of 103 FPS. Since this is above 60 FPS, Ultra is the most demanding preset that remains playable at this resolution.
Q: How much performance is lost when moving from 1080p to 4K?
A: The loss depends on the preset. At Low settings, the average FPS drops from 162.3 at 1080p to 114 at 4K, a reduction of 48.3 FPS. At High settings, the drop is from 139.5 to 73.4, a reduction of 66.1 FPS. At Ultra, the drop is from 128.5 to 58.2, a reduction of 70.3 FPS.
Q: Does the CPU bottleneck the GPU in this game?
A: The benchmark results suggest that the CPU is not a limiting factor at higher resolutions. At 4K, the frame rates scale primarily with GPU load, and the Ryzen 5 2600's 12 threads provide sufficient processing for the game's logic. At 1080p, the frame rates are higher, but the CPU's single-thread score of 157.3 in Cinebench R15 and multi-thread score of 1248 indicate it can keep up with the GPU's output in this title.
Q: Is the RTX 5080 overkill for a game released in 2016?
A: The measured data shows that the GPU still cannot hold 60 FPS at 4K Ultra, which suggests that The Technomancer has demanding graphics settings. The RTX 5080's benchmark scores, such as 36,565 in Passmark G3D and 56.28 TFLOPS FP32, place it in the 87th percentile of all GPUs, yet it still falls short at the highest settings. This indicates the game's Ultra preset is particularly heavy.
Q: What is the playable settings list at each resolution?
A: At 3840x2160, the playable settings are High, Low, and Medium, with High being the best at 73.4 FPS. At 2560x1440, all four presets are playable, with Ultra as the best at 103 FPS. At 1920x1080, all four presets are playable, with Ultra as the best at 128.5 FPS.
Similar Performance Alternatives
The database includes nearest rival comparisons for both the CPU and GPU. For the AMD Ryzen 5 2600, the closest matching processors in terms of average benchmark score are the Intel Core Ultra 5 228V, which scores 21,440 and is 0.2% faster, and the Intel Core i9-11900H, which scores 21,367 and is 0.5% faster. On the slower side, the AMD EPYC 9454 scores 21,223, which is 1.2% slower, and the Intel Xeon D-1746TER scores 21,635, which is 0.7% faster. These four CPUs all fall within a narrow band around the Ryzen 5 2600's average benchmark score of 21,484. For gaming purposes, any of these processors would likely deliver similar frame rates in The Technomancer, as the game's CPU demands are modest compared to the GPU workload.
For the NVIDIA GeForce RTX 5080, the nearest rivals in the GPU database are the AMD Radeon 8060S, which scores 55,757 and is 0.6% slower, and the AMD Radeon RX 6750 GRE 12 GB, which scores 55,698 and is 0.7% slower. The AMD Radeon Pro W5700X scores 54,828, which is 2.3% slower, while the AMD Radeon RX 9070 GRE scores 57,367, which is 2.2% faster. The RTX 5080's average benchmark score is 56,083, placing it in the 87th percentile of all GPUs. In practical terms, the Radeon RX 9070 GRE would be the closest competitor that slightly outperforms the RTX 5080 in synthetic tests, while the Radeon 8060S and RX 6750 GRE would trail by a small margin. When paired with the Ryzen 5 2600, these alternative GPUs would likely produce similar FPS results in The Technomancer, with differences of only a few frames per second at most settings.
How This Combo Ranks
The database ranks this specific CPU and GPU combination against all other tested combos for The Technomancer. The combo rank is 813 out of 3,696 total combinations. This places the Ryzen 5 2600 + RTX 5080 in the top 22% of all tested systems for this game. The high rank is primarily driven by the GPU's strong performance, as the RTX 5080 sits in the 87th percentile of all GPUs. The CPU, while older and in the 75th percentile of all CPUs, does not drag the overall ranking down significantly because The Technomancer appears to be GPU-bound at most settings.
The rank of 813 means that there are 812 tested combinations that achieve higher average frame rates in this game. These would likely include systems with newer, higher-end CPUs paired with the same or faster GPUs. However, the gap in actual FPS between this combo and those ranked above it may be small, especially at lower resolutions where the GPU is not fully saturated. At 1080p, the average FPS across all settings ranges from 128.5 to 162.3, which is already very high. The ranking position reflects the overall average performance across all tested resolutions and settings, not just the peak.
The Verdict
This PC can run The Technomancer at 60 FPS or higher in most configurations. The verdict by resolution is clear. At 1920x1080, all four presets (Low, Medium, High, Ultra) are playable, with the best average FPS at Ultra being 128.5. At 2560x1440, all four presets are also playable, with Ultra achieving 103 FPS. At 3840x2160, three presets are playable: High (73.4 FPS), Low (114 FPS), and Medium (89.5 FPS). The Ultra preset at 4K falls short at 58.2 FPS, which is below the 60 FPS playable threshold.
For users with a 4K monitor, the recommendation is to use High settings for the best visual quality while staying above 60 FPS. For 1440p and 1080p displays, Ultra settings are fully playable and provide the highest fidelity. The system never dips below 58.2 FPS in any tested configuration, so even the worst case is close to the threshold. The data indicates that this combination is well-suited for The Technomancer at all resolutions except 4K Ultra.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 73.4 FPS. This provides a comfortable margin above the threshold while offering better visual quality than Medium or Low. Medium averages 89.5 FPS and Low averages 114 FPS, but High is the optimal balance between fidelity and performance.
At 2560x1440, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 103 FPS. This is the highest preset available in the game, and the combination handles it without issue. There is no need to reduce settings at this resolution.
At 1920x1080, the most demanding preset that stays at or above 60 FPS is also Ultra, with an average of 128.5 FPS. This leaves significant headroom, meaning that even during intense scenes with multiple enemies or particle effects, the frame rate is unlikely to drop below the playable threshold.
The data shows a clear pattern: as resolution increases, the preset must be lowered to maintain 60 FPS. At 1080p, Ultra is viable. At 1440p, Ultra remains viable with a 43 FPS margin. At 4K, Ultra is not viable, and High is the maximum preset.
CPU and GPU Roles
The relative importance of the CPU versus the GPU in this combination varies by resolution. At 1920x1080, the GPU is likely the primary driver of frame rates, but the CPU's role is more pronounced because the lower resolution reduces the GPU's rendering load. The Ryzen 5 2600 has a base clock of 3.40 GHz and a boost clock of 3.90 GHz, with 12 threads available. Its multi-threaded benchmark scores, such as 5,648 in Geekbench multicore and 13,160 in Passmark multithread, indicate it can handle the game's logic and draw calls. The fact that the average FPS at 1080p Low is 162.3 suggests the CPU is not a bottleneck, as the GPU is capable of producing very high frame rates.
At 2560x1440, the GPU becomes more dominant. The average FPS at Low settings drops from 162.3 at 1080p to 141.5 at 1440p, a 12.8% reduction. This is a smaller percentage drop than what would be expected if the CPU were the limiting factor. The scaling from 1080p to 1440p at Ultra settings shows a drop from 128.5 to 103, a 19.8% reduction, which is more consistent with GPU-bound performance.
At 3840x2160, the GPU is almost entirely responsible for the frame rate. The average FPS at Low settings drops to 114, and at Ultra it drops to 58.2. The difference between 1440p and 4K at Ultra is 44.8 FPS, which is a 43.5% reduction. This large drop indicates that the GPU's pixel throughput is the limiting factor, not the CPU. The RTX 5080 has a pixel rate of 293.1 GPixel/s and a texture rate of 879.3 GTexel/s, but the demands of 4K Ultra in The Technomancer exceed its capabilities in this specific game.
The CPU's influence is most visible at 1080p, where the frame rates are highest. However, even at 1080p, the CPU does not appear to cap the frame rate, as the average FPS at Low (162.3) is well above what most CPUs would limit. The single-thread performance of the Ryzen 5 2600, with a Passmark single-thread score of 2,239, is sufficient for this game's engine. The data suggests that users upgrading from a weaker CPU to the Ryzen 5 2600 would see little change in The Technomancer's performance, while upgrading the GPU would have a larger impact, especially at 1440p and 4K.