Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

71%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
161 FPS
Ultra 1080p Measured
91 FPS

1440p (2K / QHD)

Low 1440p Measured
115 FPS
Ultra 1440p Measured
61 FPS

4K (Ultra HD)

Low 4K Measured
65 FPS
Ultra 4K Measured
33 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 21,484
Graphics Card
Required 27,947
Your GPU 26,331

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 45 49 65
1440p QHD 61 78 90 115
1080p Full HD 91 120 140 161

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 120
1920x1080 Low 161
1920x1080 Medium 140
1920x1080 Ultra 91
2560x1440 High 78
2560x1440 Low 115
2560x1440 Medium 90
2560x1440 Ultra 61
3840x2160 High 45
3840x2160 Low 65
3840x2160 Medium 49
3840x2160 Ultra 33

Performance Analysis: The Technomancer on Your System

Similar Performance Alternatives

The AMD Ryzen 5 2600 sits in a well-populated performance tier. Its average benchmark score of 21,484 places it within 1% of several other processors in the database. The closest match is the Intel Core Ultra 5 228V, which scores 21,440, a negligible 0.2% difference. The Intel Core i9-11900H trails by a hair at 21,367, which is 0.5% slower. On the other side, the Intel Xeon D-1746TER leads the Ryzen 5 2600 by 0.7% with a score of 21,635, and the AMD EPYC 9454 is 1.2% ahead at 21,223. In practical terms, swapping the Ryzen 5 2600 for any of these four chips would produce nearly identical frame rates in The Technomancer, as the processing headroom is essentially interchangeable.

For the GPU, the NVIDIA GeForce RTX 5060 posts an average benchmark score of 26,331, and its nearest rivals cluster tightly around that figure. The AMD Radeon RX 6750 XT is the fastest of the group at 26,011, which is 1.2% behind the RTX 5060. The AMD Radeon 860M scores 26,401, a 0.3% margin over the RTX 5060, while the NVIDIA GeForce MX550 also edges it by 0.3% at 26,421. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8% ahead with 26,553. These deltas are so small that a user moving between any of these cards and the RTX 5060 would not observe a meaningful difference in gameplay smoothness. The recorded data suggests that this GPU tier is highly consistent, with all four rivals landing within a 2% band of each other.

CPU and GPU Roles

The measured FPS data for The Technomancer reveals how the balance between CPU and GPU shifts across resolutions. At 1920x1080, the GPU is clearly the primary driver, but the CPU still has enough headroom to avoid bottlenecking. The jump from Low to Ultra settings at this resolution costs 69.9 FPS (from 161.1 down to 91.2), which is a 43% drop. This large spread shows that the RTX 5060 is fully utilized, and the Ryzen 5 2600 can feed it without holding back performance. The fact that Ultra still clears 90 FPS confirms that neither component is a weak link at this resolution.

Moving to 2560x1440, the GPU starts to take on more responsibility. The Low preset delivers 115.2 FPS, while Ultra drops to 60.7 FPS, a reduction of 54.5 FPS or 47%. The scaling from 1080p to 1440p at the same settings shows a consistent pattern: High falls from 120.0 to 78.1 FPS, Medium from 140.4 to 90.0 FPS, and Low from 161.1 to 115.2 FPS. These reductions range from 28% to 35%, indicating that the GPU is doing heavier lifting as pixel count rises. The CPU's role diminishes, but it still maintains the minimum frame pacing needed for playability.

At 3840x2160, the GPU becomes the dominant constraint. The Low preset manages 65.1 FPS, but Medium drops to 48.6 FPS and High to 44.5 FPS. Ultra falls to 32.9 FPS. The scaling between 1440p and 4K is steep: High goes from 78.1 to 44.5 FPS, a 43% loss, and Medium from 90.0 to 48.6 FPS, a 46% loss. This pattern clearly shows that the RTX 5060's memory bandwidth and compute resources are saturated at 4K, while the Ryzen 5 2600 has ample capacity to keep up. The CPU's 6 cores and 12 threads are more than sufficient for this game, as the frame rate collapses at higher resolutions regardless of CPU load.

How This Combo Ranks

In the database's overall ranking for The Technomancer, this pairing of AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5060 holds position 1,812 out of 3,696 tested combinations. That places it in the upper half of all systems, specifically in the 49th percentile of the recorded configurations. The rank reflects the balance between CPU and GPU: the RTX 5060 is a strong graphics card for 1080p and 1440p gaming, but the Ryzen 5 2600, while capable, does not boost the combo into the top tier. The data shows that many other CPU and GPU pairings achieve higher average FPS, likely due to newer processors with higher single-thread performance.

The ranking is particularly informative when compared to the individual component percentiles. The CPU sits at the 75th percentile among all processors, while the GPU is at the 72nd percentile. The combined rank of 1,812 out of 3,696 suggests that the pairing is well-matched, as neither component is dramatically stronger or weaker than the other. If the GPU were significantly more powerful than the CPU, the combo would rank lower due to bottlenecking. Conversely, if the CPU were much faster, the GPU would limit performance. The recorded data indicates that the Ryzen 5 2600 provides sufficient throughput for the RTX 5060 to operate near its full potential in this title.

The Verdict

The measured performance data provides a clear answer: this PC can run The Technomancer at 60 FPS or higher across most settings and resolutions. At 1920x1080, every preset from Low to Ultra exceeds the 60 FPS threshold, with Ultra averaging 91.2 FPS. This makes 1080p fully playable at maximum quality. At 2560x1440, all four presets also clear 60 FPS, including Ultra at 60.7 FPS, which is just above the playable threshold. This means 1440p gaming is viable at the highest settings, though the margin is slim and any demanding scene could dip below 60 FPS.

At 3840x2160, the situation changes. Only the Low preset achieves playable performance, averaging 65.1 FPS. Medium falls to 48.6 FPS, High to 44.5 FPS, and Ultra to 32.9 FPS, all below the 60 FPS threshold. Therefore, 4K gaming is only recommended at Low settings. The verdict by resolution is as follows: 1080p and 1440p are fully playable at any setting, while 4K requires the Low preset to maintain smooth gameplay. For users prioritizing visual quality, 1440p Ultra is the sweet spot, as it delivers 60.7 FPS with the highest fidelity that this combo can sustain.

Measured FPS Breakdown

The database records average FPS for each resolution and settings combination, with no minimum or maximum values captured. The full table is as follows:

At 1920x1080, the Low preset averages 161.1 FPS, Medium averages 140.4 FPS, High averages 120.0 FPS, and Ultra averages 91.2 FPS. The progression from Low to Ultra shows a steady decline, with the largest single drop occurring between High and Ultra, a 28.8 FPS reduction. This suggests that Ultra settings introduce particularly heavy effects that strain the GPU.

At 2560x1440, Low averages 115.2 FPS, Medium averages 90.0 FPS, High averages 78.1 FPS, and Ultra averages 60.7 FPS. The gap between Medium and High is 11.9 FPS, while the gap between High and Ultra is 17.4 FPS. The Ultra preset barely clears the playable threshold, indicating that it is near the limit of what the RTX 5060 can handle at this resolution.

At 3840x2160, Low averages 65.1 FPS, Medium averages 48.6 FPS, High averages 44.5 FPS, and Ultra averages 32.9 FPS. The drop from Low to Medium is 16.5 FPS, which is the steepest single reduction across all resolutions. This indicates that the Medium preset at 4K adds substantial rendering load, likely from increased texture detail and shadow quality. High and Ultra continue the decline, with Ultra representing a 50% reduction from Low.

Best Settings per Resolution

For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 91.2 FPS. This is the highest quality setting available, and it delivers a comfortable margin above the playable threshold. Users can run the game at maximum fidelity without concern for frame rate drops.

For 2560x1440, the best setting is also Ultra, averaging 60.7 FPS. This is just above the 60 FPS threshold, so it is technically playable, but the margin is thin. Users who prefer a safety buffer might opt for High, which averages 78.1 FPS, but the recorded data confirms that Ultra is viable at this resolution.

For 3840x2160, the only preset that clears 60 FPS is Low, averaging 65.1 FPS. Medium, High, and Ultra all fall below the threshold, so Low is the recommended setting for 4K gaming. The 4.9 FPS margin over 60 FPS is modest, but it does provide a playable experience. Users seeking higher quality at 4K would need to accept frame rates below 60 FPS, which the data shows is not ideal for smooth gameplay.

FAQ

Q: Can this PC run The Technomancer at 1080p on Ultra settings?

A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 91.2 FPS, which is well above the 60 FPS playable threshold.

Q: What is the best setting for 1440p gaming?

A: Ultra settings at 2560x1440 average 60.7 FPS, making it the most demanding preset that remains playable. High settings average 78.1 FPS if a larger margin is preferred.

Q: Is 4K gaming possible with this hardware?

A: Yes, but only at Low settings, which average 65.1 FPS at 3840x2160. Medium, High, and Ultra all fall below 60 FPS, with averages of 48.6, 44.5, and 32.9 FPS respectively.

Q: How does the CPU compare to its nearest alternatives?

A: The Ryzen 5 2600 scores 21,484 in the database, which is within 1.2% of the Intel Core Ultra 5 228V, Intel Core i9-11900H, Intel Xeon D-1746TER, and AMD EPYC 9454. All five processors would perform nearly identically in this game.

Q: How does the GPU compare to its nearest alternatives?

A: The RTX 5060 scores 26,331, with the AMD Radeon RX 6750 XT, AMD Radeon 860M, NVIDIA GeForce MX550, and AMD Radeon RX 5700 XT 50th Anniversary all within 1.2% of that score. The performance differences are negligible.

Q: What is the overall ranking of this CPU and GPU combination?

A: The combo ranks 1,812 out of 3,696 tested configurations in the database, placing it in the upper half of all systems tested for The Technomancer.