Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 77 | 91 | 114 |
| 1440p QHD | 110 | 120 | 127 | 140 |
| 1080p Full HD | 127 | 138 | 146 | 161 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 4090 presents a notable generational mismatch in The Technomancer. The recorded data shows a system where the GPU is operating far above the CPU’s original performance tier, yet the frame rates remain consistently high across all tested resolutions and presets. This analysis breaks down the measured performance, optimal settings, and how this specific combination compares to other hardware configurations in the database.
Measured FPS Breakdown
At 1920x1080, the combination delivers its highest raw frame rates. The Low preset averages 161 FPS, with Medium at 146 FPS and a recorded minimum of 124 FPS and maximum of 168 FPS. High settings produce an average of 138 FPS, while Ultra reduces the average to 127 FPS. The spread from Low to Ultra is 34 FPS, indicating that the GPU has ample headroom at this resolution even when the CPU is tasked with higher object counts.
At 2560x1440, the performance remains strong but shows a more compressed range between presets. Low averages 140 FPS, High averages 120 FPS, and Ultra averages 110 FPS. Medium sits at 127 FPS, with a minimum of 108 FPS and maximum of 146 FPS. The difference between Low and Ultra here is 30 FPS, slightly narrower than at 1080p, suggesting the GPU is beginning to take on more of the rendering load.
At 3840x2160, the impact of resolution scaling becomes clear. Low averages 114 FPS, Medium averages 91 FPS with a minimum of 77 FPS and maximum of 104 FPS, High averages 77 FPS, and Ultra drops to 61 FPS. The gap between Low and Ultra expands to 53 FPS, the largest of any resolution tested. This indicates that at 4K, the RTX 4090 is fully engaged, and the CPU bottleneck observed at lower resolutions diminishes significantly.
The minimum FPS values are only recorded for Medium settings at each resolution. At 1080p the minimum is 124 FPS, at 1440p it is 108 FPS, and at 4K it is 77 FPS. These figures confirm that even the lowest momentary frame rates stay well above the 60 FPS playability threshold.
Best Settings per Resolution
At 1920x1080, the Ultra preset is achievable with an average of 127 FPS. Since every preset at this resolution exceeds 60 FPS, the most demanding option is the recommended choice for visual fidelity without sacrificing smoothness.
At 2560x1440, Ultra also remains the best setting, delivering an average of 110 FPS. The margin above the 60 FPS threshold is substantial, leaving room for additional background tasks or future driver overhead without dropping below playable rates.
At 3840x2160, Ultra remains playable but with a much thinner margin. The average at Ultra is 61 FPS, which barely clears the 60 FPS threshold. High settings provide a more comfortable buffer at 77 FPS, but the data confirms that Ultra is still technically playable at 4K. For users who prioritize consistent frame pacing over maximum visual quality, High would be the safer choice, but the measured average at Ultra supports its inclusion as the best settings option.
CPU and GPU Roles
The scaling between resolutions and presets reveals a clear division of labor. At 1080p, the CPU has a stronger influence on frame rates because the GPU can produce frames faster than the Ryzen 5 2600 can feed it. The difference between Low and Ultra at 1080p is 34 FPS, which is modest compared to the 53 FPS difference at 4K. This compression at lower resolutions is a classic sign of a CPU bottleneck.
At 1440p, the GPU begins to assume more responsibility, but the CPU still contributes. The range between Low and Ultra narrows to 30 FPS, and the average frame rates remain high across all presets. The RTX 4090 is still capable of pushing past 110 FPS even at Ultra, so the CPU is not yet the limiting factor at this resolution.
At 4K, the GPU becomes the dominant component. The spread between presets widens to 53 FPS, and the average at Ultra falls to 61 FPS, showing that the rendering workload now dictates performance. The Ryzen 5 2600’s role is reduced at this resolution, as the GPU is no longer waiting on CPU instructions to the same degree. The data indicates that users targeting 4K will see the RTX 4090 working near its limits, while the CPU has less impact on the final frame rate.
How This Combo Ranks
The combination ranks 807th out of 3696 tested configurations in the database for The Technomancer. This places it in the top 22 percent of all recorded combos, a strong position for a system built around a 2018 CPU and a 2022 GPU. The percentile data reinforces this: the CPU sits at the 75th percentile among all CPUs, and the GPU at the 88th percentile among all GPUs.
The ranking reflects the GPU’s dominance in this pairing. While the Ryzen 5 2600 is not a top-tier processor by modern standards, the RTX 4090 compensates by carrying the majority of the rendering workload, particularly at higher resolutions. The result is a configuration that outperforms most tested systems in this specific game, despite the age of the CPU.
Similar Performance Alternatives
The nearest rivals for the Ryzen 5 2600, based on average benchmark scores, include the Intel Core Ultra 5 228V with a delta of 0.2 percent, the Intel Core i9-11900H with a delta of 0.5 percent, the Intel Xeon D-1746TER with a delta of -0.7 percent, and the AMD EPYC 9454 with a delta of 1.2 percent. These processors produce nearly identical average scores, meaning a system built with any of them would likely deliver similar CPU-bound performance in The Technomancer.
For the RTX 4090, the nearest rivals are the Intel Arc Pro A60 with a delta of 0 percent, the AMD Radeon Pro Vega 48 with a delta of 0.3 percent, the AMD Radeon Pro W6600M with a delta of -2.5 percent, and the AMD Radeon PRO V710 with a delta of 2.9 percent. The delta values are small, indicating that these GPUs fall within a narrow performance band around the RTX 4090 in synthetic benchmarks. In practice, swapping the RTX 4090 for one of these alternatives would produce similar frame rates in The Technomancer, assuming the CPU remains unchanged.
FAQ
Q: Can this system run The Technomancer at 4K Ultra settings?
A: Yes. The measured average at 3840x2160 with Ultra settings is 61 FPS, which is above the 60 FPS playability threshold.
Q: What is the best settings preset at 1440p?
A: Ultra is the best settings preset at 2560x1440, with an average of 110 FPS.
Q: How does the CPU affect performance at 1080p compared to 4K?
A: At 1080p, the CPU has a stronger influence, with a 34 FPS difference between Low and Ultra. At 4K, the GPU dominates, and the difference between Low and Ultra widens to 53 FPS.
Q: Are there any presets that drop below 60 FPS?
A: No. Every recorded preset and resolution combination stays at or above 61 FPS average. The lowest recorded average is 61 FPS at 4K Ultra.
Q: How does this combo rank among all tested configurations?
A: It ranks 807th out of 3696 tested combos for The Technomancer.
Q: Which components would perform similarly to the RTX 4090 in this system?
A: The Intel Arc Pro A60, AMD Radeon Pro Vega 48, AMD Radeon Pro W6600M, and AMD Radeon PRO V710 all have average benchmark scores within 2.9 percent of the RTX 4090.
The Verdict
This PC can run The Technomancer at every resolution and preset combination tested. At 1920x1080, the Ultra preset delivers 127 FPS, providing a wide margin above the 60 FPS threshold. At 2560x1440, Ultra remains comfortable at 110 FPS. At 3840x2160, Ultra is still playable at 61 FPS, though High at 77 FPS offers more headroom for consistent frame delivery.
The verdict by resolution confirms that all four settings presets are playable at every resolution. The weakest point in the configuration is the CPU, but its impact is most visible at lower resolutions where frame rates are already high. Users targeting 4K will find the RTX 4090 doing most of the work, while those at 1080p or 1440p will enjoy frame rates that far exceed the playability standard. The combination is a capable performer in this title, with no recorded scenario falling below 60 FPS.