Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
161 FPS
Ultra 1080p Measured
127 FPS

1440p (2K / QHD)

Low 1440p Measured
140 FPS
Ultra 1440p Measured
100 FPS

4K (Ultra HD)

Low 4K Measured
107 FPS
Ultra 4K Measured
55 FPS
7.2ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 21,484
Graphics Card
Required 27,947
Your GPU 54,247

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 70 82 107
1440p QHD 100 120 127 140
1080p Full HD 127 138 146 161

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 138
1920x1080 Low 161
1920x1080 Medium 146
1920x1080 Ultra 127
2560x1440 High 120
2560x1440 Low 140
2560x1440 Medium 127
2560x1440 Ultra 100
3840x2160 High 70
3840x2160 Low 107
3840x2160 Medium 82
3840x2160 Ultra 55

Performance Analysis: The Technomancer on Your System

The Technomancer is a 2016 action RPG, and the pairing of an AMD Ryzen 5 2600 with an NVIDIA GeForce RTX 4080 makes it look trivially easy on paper. The measurements back that up. This is a lopsided combo in the best possible way: a mid-range Zen+ six-core feeding one of the strongest Ada Lovelace cards, running a game that predates both components. The recorded data shows playable frame rates at every tested resolution, with only one preset, Ultra at 4K, falling short of the 60 FPS threshold.

Best Settings per Resolution

At 1920x1080, the most demanding preset that holds at or above 60 FPS is Ultra, delivering an average of 127 FPS. That is the ceiling preset and it clears the threshold by more than double.

At 2560x1440, Ultra again stays playable, averaging 100 FPS. Every preset tested at this resolution, Low through Ultra, exceeds 60 FPS.

At 3840x2160, the most demanding playable preset is High, averaging 70 FPS. Ultra at 4K lands at 55 FPS on average, which sits below the 60 FPS threshold, so High is the correct top choice for a 4K panel if you want to stay consistently at or above the line.

FAQ

Q: Can the RTX 4080 run The Technomancer at 4K with max settings?

A: Not quite. Ultra at 3840x2160 averages 55 FPS, which is below the 60 FPS playability threshold. Dropping one step to High at 4K restores an average of 70 FPS.

Q: Which preset should I use at 1440p?

A: Ultra. It averages 100 FPS at 2560x1440, comfortably above 60 FPS, so there is no reason to lower settings at this resolution.

Q: Does the Ryzen 5 2600 bottleneck this game?

A: The recorded data indicates no practical bottleneck. Frame rates scale upward from 1080p through 4K as GPU load increases, and even 1080p Ultra averages 127 FPS. The six-core, twelve-thread CPU with a 3.90 GHz boost clock handles a 2016 action RPG without limiting results.

Q: What is the minimum frame rate recorded?

A: The lowest measured minimum in the dataset is 70 FPS, from 4K Medium, where frame rates ranged from 70 to 94 FPS. At 1440p Medium the minimum was 108 FPS (max 146), and at 1080p Medium the minimum was 124 FPS (max 168).

Q: How does this hardware pairing rank against other tested combos in this game?

A: It ranks 912 out of 3696 tested combinations, placing it in roughly the top quarter of the database for this title.

Q: What GPU compute muscle is behind these results?

A: The RTX 4080 brings 48.74 TFLOPS of FP32 throughput, 9728 shading units, and 716.8 GB/s of memory bandwidth across a 256-bit bus with 16 GB of GDDR6X, more than enough for a title from 2016.

Measured FPS Breakdown

At 1920x1080, the data shows the following averages: Low at 161 FPS, Medium at 146 FPS, High at 138 FPS, and Ultra at 127 FPS. The Medium run recorded a minimum of 124 FPS and a maximum of 168 FPS, meaning even the slowest moments at the middle preset outpace many monitors' refresh rates. The spread from lowest to highest preset at 1080p is 34 FPS, a narrow band that reflects how little this game demands from a card of this class.

At 2560x1440, averages were 140 FPS on Low, 127 FPS on Medium, 120 FPS on High, and 100 FPS on Ultra. The Medium run at this resolution recorded a minimum of 108 FPS and a maximum of 146 FPS. Note that Medium at 1440p (127 FPS) matches the Ultra result at 1080p (127 FPS), which tells you the GPU is absorbing the pixel count increase without strain.

At 3840x2160, averages were 107 FPS on Low, 82 FPS on Medium, 70 FPS on High, and 55 FPS on Ultra. The Medium run at 4K recorded a minimum of 70 FPS and a maximum of 94 FPS. This is the only resolution where a preset fails the 60 FPS bar: Ultra's 55 FPS average sits just under it. High at 70 FPS is the recommended ceiling for a smooth 4K experience.

The overall pattern is classic GPU headroom: frame rates fall gradually as resolution climbs rather than falling off a cliff. From 1080p Ultra to 4K Ultra, the average drops from 127 FPS to 55 FPS, a graceful decline consistent with a GPU-limited rather than CPU-limited scenario.

Similar Performance Alternatives

For the CPU side, the Ryzen 5 2600's average benchmark score of 21484 places it in the 75th percentile of all CPUs in the database. Its nearest rivals are remarkably close: the Intel Core Ultra 5 228V averages 21440 (a difference of just 0.2 percent), the Intel Core i9-11900H averages 21367 (0.5 percent behind), the Intel Xeon D-1746TER averages 21635 (0.7 percent ahead), and the AMD EPYC 9454 averages 21223 (1.2 percent behind). Any of these processors would produce effectively identical results in The Technomancer, since the game's performance here is dominated by the graphics card.

For the GPU side, the RTX 4080's average score of 54247 puts it in the 86th percentile of all GPUs. The nearest rival is the NVIDIA GeForce RTX 4080 SUPER at 54209, only 0.1 percent behind, making it the most direct substitute. The AMD Radeon Pro W5700X averages 54828 (1.1 percent ahead), the AMD Radeon RX 6750 GRE 12 GB averages 55698 (2.6 percent ahead), and the AMD Radeon 8060S averages 55757 (2.7 percent ahead). Any of these cards would deliver frame rates within a few percent of what is recorded here, so a build with the RX 6750 GRE 12 GB, for example, should behave nearly the same in this title.

The Verdict

Yes, this PC runs The Technomancer, and comfortably. The verdict data confirms playable settings at every resolution tested:

  • 1920x1080: all four presets playable, best is Ultra at 127 FPS average.
  • 2560x1440: all four presets playable, best is Ultra at 100 FPS average.
  • 3840x2160: Low, Medium, and High playable, best is High at 70 FPS average. Ultra at 55 FPS misses the 60 FPS threshold.

The practical takeaway for a builder: pair this combo with a 1440p display and run everything maxed, or use a 4K display with the High preset. The Ryzen 5 2600, with six cores, twelve threads, and a 3.40 GHz base and 3.90 GHz boost clock on the AM4 socket, was never going to be the limiting factor in a 2016 action RPG. The RTX 4080, with its AD103 chip on TSMC's 5 nm process, carries the load. The only compromise anywhere in the dataset is a single 5 FPS shortfall at the very top preset on the very highest resolution.

How This Combo Ranks

Against the full field, the Ryzen 5 2600 plus RTX 4080 combination ranks 912 out of 3696 tested hardware pairings for The Technomancer. That places it solidly in the upper quartile of the database. The ranking makes sense given the components' individual standings: the CPU sits in the 75th percentile versus all processors, while the GPU sits in the 86th percentile versus all graphics cards. This is a GPU-forward pairing, with the graphics hardware roughly eleven percentile points ahead of the processor in its respective category, and the in-game results reflect that balance. For a game released in 2016, a top-quarter ranking with 100 FPS at 1440p Ultra is exactly what the data predicts.