Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
159 FPS
Ultra 1080p Measured
117 FPS

1440p (2K / QHD)

Low 1440p Measured
140 FPS
Ultra 1440p Measured
77 FPS

4K (Ultra HD)

Low 4K Measured
84 FPS
Ultra 4K Measured
40 FPS
7.2ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 21,484
Graphics Card
Required 27,947
Your GPU 37,648

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 55 63 84
1440p QHD 77 103 118 140
1080p Full HD 117 139 144 159

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 139
1920x1080 Low 159
1920x1080 Medium 144
1920x1080 Ultra 117
2560x1440 High 103
2560x1440 Low 140
2560x1440 Medium 118
2560x1440 Ultra 77
3840x2160 High 55
3840x2160 Low 84
3840x2160 Medium 63
3840x2160 Ultra 40

Performance Analysis: The Technomancer on Your System

FAQ

Q: Can this combination maintain 60 FPS at 4K with Ultra settings?

A: No. The recorded average at 3840x2160 with Ultra settings is 39.5 FPS, which falls well below the 60 FPS playable threshold. The playable settings at 4K are Limited to Low and Medium, with Medium achieving 63.3 FPS on average.

Q: What is the best playable setting at 1440p for this CPU and GPU combo?

A: At 2560x1440, all four tested presets (Low, Medium, High, Ultra) clear the 60 FPS threshold. The best playable setting is Ultra, which delivers an average of 76.7 FPS, leaving a comfortable margin above the playable line.

Q: How does the combo rank among all tested configurations in this game?

A: The combination of AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4070 ranks 1267 out of 3696 tested combos in The Technomancer. This places it in the upper portion of the database, roughly in the top third of all recorded configurations.

Q: Which component is more demanding at 1080p, the CPU or the GPU?

A: At 1920x1080, the data shows a relatively small spread between Low (158.5 FPS) and Medium (143.8 FPS), suggesting the GPU is not the limiting factor at this resolution. The CPU, with a passmark single thread score of 2239 and a 75th percentile ranking among all CPUs, is likely more relevant for pushing frame rates beyond the 140-160 FPS range at 1080p.

Q: What happens to performance when moving from 1080p to 4K at High settings?

A: The average frame rate drops from 139 FPS at 1920x1080 to 103.1 FPS at 2560x1440, then further to 54.8 FPS at 3840x2160. This represents a 60.6% reduction in average FPS when moving from 1080p High to 4K High, indicating that the GPU becomes the dominant constraint as resolution increases.

Q: Does the RTX 4070 significantly outperform its nearest rivals in this game?

A: The benchmark data for the GPU shows an average score of 37648, with the nearest rival being the NVIDIA Tesla P4 at 37628 (only 0.1% difference). The AMD Radeon RX Vega 56 trails by 0.4%, and the NVIDIA GeForce RTX 4080 Mobile leads by 1.3%. The differences are minimal, suggesting these GPUs would produce very similar frame rates in The Technomancer.

CPU and GPU Roles

The data across resolutions reveals a clear shift in which component dictates performance. At 1920x1080, the frame rates are remarkably high across all presets: Low delivers 158.5 FPS, Medium 143.8 FPS, High 139 FPS, and even Ultra maintains 116.7 FPS. The small gap between Low and High (only 19.5 FPS) suggests that the CPU, with its 12 threads and 16 MB of shared L3 cache, is keeping up with the RTX 4070's rendering capacity. The Ryzen 5 2600's passmark multithread score of 13160 and single thread score of 2239 indicate a processor that can feed frames at this rate without becoming a bottleneck.

Moving to 2560x1440, the GPU begins to assert more influence. The spread between Low (139.7 FPS) and Ultra (76.7 FPS) widens to 63 FPS, a much larger gap than at 1080p. This is expected behavior: as pixel count increases, the GPU's fill rate and shading capacity become more significant. The RTX 4070, with its 5888 shading units and 158.4 GPixel/s pixel rate, still handles this resolution with ease, keeping every preset above the 60 FPS threshold. The CPU's role diminishes here, since the GPU is doing more work per frame.

At 3840x2160, the GPU is unmistakably the dominant factor. The frame rate drops sharply: Low produces 83.7 FPS, Medium 63.3 FPS, High 54.8 FPS, and Ultra falls to 39.5 FPS. The 44.2 FPS difference between Low and Ultra at 4K, compared to only 41.8 FPS at 1080p, shows that resolution scaling disproportionately taxes the GPU. The RTX 4070's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are sufficient for 4K textures, but the sheer pixel workload at 3840x2160 pushes the card beyond its comfort zone at higher presets.

The scaling pattern is consistent: at 1080p, the CPU and GPU are relatively balanced, with the CPU potentially limiting ultra-high refresh rate scenarios. At 1440p, the GPU becomes more important but the combo remains well-balanced. At 4K, the GPU is the clear bottleneck, and the CPU's performance headroom becomes irrelevant. The Ryzen 5 2600, released in 2018 with a base clock of 3.40 GHz and boost of 3.90 GHz, is an older processor, but its 6 cores and 12 threads are sufficient for this 2016 Action RPG, which does not appear to demand excessive CPU resources based on the measured frame rates.

Best Settings per Resolution

1920x1080: The most demanding preset that stays at or above 60 FPS is Ultra, with an average of 116.7 FPS. This leaves substantial headroom above the playable threshold. Even the most demanding setting doesn't come close to threatening the 60 FPS line, so players can max out the game without concern.

2560x1440: Ultra is again the best choice, maintaining an average of 76.7 FPS. This is 16.7 FPS above the threshold, providing a comfortable margin for occasional dips in demanding scenes. The recorded data shows no minimum FPS values, but the average suggests stable performance.

3840x2160: Medium is the most demanding preset that clears 60 FPS, with an average of 63.3 FPS. This is only 3.3 FPS above the threshold, so players who prefer a safety margin might opt for Low (83.7 FPS) instead. Ultra at 39.5 FPS and High at 54.8 FPS are both below the playable threshold.

The verdict data confirms these choices: for 3840x2160, the playable settings are Low and Medium, with Medium being the best; for both 2560x1440 and 1920x1080, all settings are playable, and Ultra is the best.

How This Combo Ranks

In the database of tested combinations for The Technomancer, this pairing of AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4070 sits at rank 1267 out of 3696 total combos. This places it in roughly the 65th percentile, meaning about 65% of tested configurations rank below it and about 35% rank above.

To contextualize this ranking, consider the component-level benchmarks. The CPU's average benchmark score of 21484 places it at the 75th percentile among all CPUs, with nearest rivals including the Intel Core Ultra 5 228V (0.2% higher score) and the Intel Xeon D-1746TER (0.7% lower score). The GPU's average benchmark score of 37648 places it at the 81st percentile among all GPUs, with nearest rivals being the NVIDIA Tesla P4 (0.1% lower) and AMD Radeon RX Vega 56 (0.4% lower).

The rank of 1267 reflects a combination where the GPU is significantly stronger than the CPU in relative terms. The RTX 4070 is a high-end current-generation card, while the Ryzen 5 2600 is a mid-range processor from an older generation. In a game like The Technomancer, which is not particularly CPU-intensive based on the high frame rates at 1080p, this imbalance doesn't hurt performance much. The combo's rank is respectable, and the measured FPS data confirms that it delivers playable performance at all resolutions except 4K Ultra.

Similar Performance Alternatives

For the CPU, the nearest rivals in the database are all within 1.2% of the Ryzen 5 2600's average benchmark score of 21484. The Intel Core Ultra 5 228V scores 21440 (0.2% higher), the Intel Core i9-11900H scores 21367 (0.5% higher), the Intel Xeon D-1746TER scores 21635 (0.7% higher), and the AMD EPYC 9454 scores 21223 (1.2% higher). In practice, any of these processors would produce nearly identical frame rates in The Technomancer when paired with the same GPU. The differences are within measurement noise, so users upgrading from one to another would see no meaningful change in this game.

For the GPU, the nearest rivals are similarly close. The NVIDIA Tesla P4 scores 37628 (0.1% lower than the RTX 4070's 37648), the AMD Radeon RX Vega 56 scores 37507 (0.4% lower), the NVIDIA GeForce RTX 4080 Mobile scores 38135 (1.3% higher), and the AMD Radeon PRO W6400 scores 37157 (1.3% lower). These deltas are all under 1.5%, meaning the frame rates would be essentially indistinguishable. A system with the Ryzen 5 2600 paired with any of these GPUs would deliver within a few FPS of the measured results in this article.

It is importantly the RTX 4080 Mobile is a laptop GPU, so its performance in a desktop context might vary due to thermal and power constraints. The RX Vega 56, while older, clearly remains competitive in this specific game based on the aggregate benchmark scores.

The Verdict

Can this PC run The Technomancer? The answer depends on the resolution and preset, but the overall verdict is yes, with caveats at 4K.

At 1920x1080, this combination runs the game flawlessly. Every preset, from Low to Ultra, stays well above 60 FPS, with Ultra delivering 116.7 FPS on average. Players can enable maximum settings and enjoy smooth performance with significant headroom.

At 2560x1440, the story is similar. Ultra settings produce 76.7 FPS, and all other presets are above 100 FPS. This resolution is the sweet spot for this combo, offering high visual fidelity without sacrificing frame rate.

At 3840x2160, the combo becomes more limited. Medium settings achieve 63.3 FPS, just barely clearing the playable threshold. Low settings deliver 83.7 FPS for those who prefer a larger margin. High and Ultra both fall below 60 FPS, at 54.8 and 39.5 respectively, so they are not recommended for smooth gameplay.

The verdict by resolution confirms this: 3840x2160 has playable settings of Low and Medium, with Medium being the best at 63.3 FPS; 2560x1440 has all settings playable with Ultra at 76.7 FPS; 1920x1080 has all settings playable with Ultra at 116.7 FPS.

In summary, this PC can run The Technomancer well at 1080p and 1440p with maximum settings, and at 4K with medium settings. It cannot handle 4K Ultra, which is a demanding combination even for modern hardware.

Measured FPS Breakdown

1920x1080:

  • Low: 158.5 FPS average
  • Medium: 143.8 FPS average
  • High: 139 FPS average
  • Ultra: 116.7 FPS average

At 1080p, the frame rates are exceptionally high across the board. Low and Medium both exceed 140 FPS, and even Ultra stays above 115 FPS. The step from High to Ultra costs 22.3 FPS, the largest drop between consecutive presets at this resolution, which reflects the additional rendering work that Ultra settings impose.

2560x1440:

  • Low: 139.7 FPS average
  • Medium: 117.5 FPS average
  • High: 103.1 FPS average
  • Ultra: 76.7 FPS average

Moving to 1440p, the frame rates remain strong. Low is nearly identical to 1080p High, showing that the GPU has ample headroom at this resolution. The gap between Medium and High is 14.4 FPS, and between High and Ultra is 26.4 FPS, indicating that Ultra settings at 1440p are significantly more demanding. Still, all presets clear the 60 FPS threshold with room to spare.

3840x2160:

  • Low: 83.7 FPS average
  • Medium: 63.3 FPS average
  • High: 54.8 FPS average
  • Ultra: 39.5 FPS average

At 4K, the performance drops are steep. Low is the only preset above 80 FPS, and Medium barely clears 60. High falls below the playable threshold, and Ultra is nearly 20 FPS below it. The difference between Medium and High is 8.5 FPS, and between High and Ultra is 15.3 FPS, showing that each preset step at 4K carries a significant performance cost.

The database records no minimum or maximum FPS values for these measurements, so the analysis relies solely on averages. The absence of minimum FPS data means we cannot assess frame time consistency or stuttering, but the average values provide a reliable indicator of overall performance. For a game from 2016, these frame rates are more than adequate for a smooth experience at all resolutions except 4K Ultra.