Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 42 | 53 | 64 | 80 |
| 1440p QHD | 72 | 98 | 114 | 140 |
| 1080p Full HD | 112 | 140 | 148 | 163 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
# Best Settings per Resolution
The recorded data for The Technomancer with the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3080 shows clear performance tiers across the three tested resolutions. The playable threshold is 60 FPS, and the most demanding preset that stays at or above that mark varies significantly depending on resolution.
At 3840x2160 (4K), the highest playable preset is Medium, which delivers an average of 64.1 FPS. High settings dip below the threshold at 52.9 FPS, while Ultra drops further to 41.7 FPS. Low settings provide headroom at 79.9 FPS, but Medium is the optimal choice for visual fidelity while maintaining smooth gameplay at this resolution.
At 2560x1440 (1440p), the entire preset range clears the 60 FPS bar. Ultra settings produce an average of 72.3 FPS, which qualifies as the most demanding playable preset. High settings reach 97.9 FPS, Medium hits 113.6 FPS, and Low runs at 139.8 FPS. The data indicates that 1440p Ultra is a comfortable target for this combination.
At 1920x1080 (1080p), all presets are playable, and Ultra again leads with 111.8 FPS. Medium records 147.6 FPS, High reaches 140 FPS, and Low tops out at 162.9 FPS. The gap between presets narrows at this resolution, suggesting the CPU begins to influence the ceiling more noticeably.
# CPU and GPU Roles
The scaling between resolutions and presets reveals which component dominates performance in The Technomancer. The sharpest indicator comes from comparing the same preset across resolutions. At Low settings, the average FPS moves from 162.9 at 1080p to 139.8 at 1440p and then to 79.9 at 4K. The 4K figure represents a 51% drop compared to 1440p, a steep decline that points to the GPU being the primary limiter at higher resolutions. The RTX 3080 has to render roughly four times the pixel count at 4K versus 1080p, and the data reflects that workload.
At Ultra settings, the pattern holds but with a different shape. The 1080p Ultra average is 111.8 FPS, 1440p Ultra drops to 72.3 FPS, and 4K Ultra falls to 41.7 FPS. The gap between 1080p and 1440p is 35%, while the gap between 1440p and 4K is 42%. These percentages show that the GPU's rendering load scales almost linearly with pixel count, confirming that the RTX 3080's rasterization throughput is the binding constraint at higher resolutions.
The CPU's role becomes visible when examining preset scaling within a single resolution. At 1080p, moving from Low to Ultra reduces performance from 162.9 FPS to 111.8 FPS, a 31% penalty. At 1440p, the same preset change drops from 139.8 FPS to 72.3 FPS, a 48% penalty. At 4K, Low to Ultra goes from 79.9 FPS to 41.7 FPS, a 48% penalty as well. The similar penalty percentages at 1440p and 4K suggest that the CPU is not the main bottleneck at those resolutions; the GPU's frame time scales with the increased shading and texture work.
At 1080p, however, the smaller penalty between presets hints that the Ryzen 5 2600's six cores and twelve threads are keeping pace more easily, leaving the GPU with less idle time. The CPU's average benchmark score of 21484 places it at the 75th percentile among all CPUs, which is respectable for a 2018 processor. Its PassMark multithread score of 13160 and single-thread score of 2239 indicate balanced throughput, but the game at 4K Ultra would need far more GPU headroom than the RTX 3080 can supply at 41.7 FPS.
In practical terms, the RTX 3080 is the component that decides playability at 4K. The Ryzen 5 2600 is sufficient to feed the GPU at 1080p and 1440p, as evidenced by the high frame rates at those resolutions. At 4K, the GPU's limits are exposed, and no CPU change would rescue Ultra settings from falling below 60 FPS.
# How This Combo Ranks
The database ranks this pairing at 1285 out of 3696 tested combinations, placing it in the upper third of all systems evaluated for The Technomancer. That rank reflects the GPU's strong raw performance profile. The RTX 3080's PassMark G3D score of 25086 and its 68th percentile standing among all GPUs make it a powerful card, even if the CPU is not the absolute newest.
The Ryzen 5 2600 holds a 75th percentile position among all CPUs, which is a solid result for a processor released in 2018. Its average benchmark score of 21484 is nearly identical to several rivals. The Intel Core Ultra 5 228V scores 21440, a 0.2% difference. The Intel Core i9-11900H scores 21367, a 0.5% difference. The AMD EPYC 9454 scores 21223, a 1.2% difference, and the Intel Xeon D-1746TER scores 21635, a 0.7% difference. These deltas are all within 1.3%, meaning the CPU's computational capability is closely matched by several very different processors.
For the GPU, the RTX 3080's average benchmark score of 23172 sits near a cluster of other cards. The NVIDIA P106-100 scores 23249, a 0.3% difference. The AMD Radeon Pro Vega 16 scores 23250, a 0.3% difference. The AMD Radeon RX 6600M scores 23273, a 0.4% difference, and the AMD Radeon R9 M290X scores 23276, a 0.4% difference. These rivals are effectively within noise of the RTX 3080 in aggregate benchmark terms, though their real-world gaming behavior may differ.
The combo rank of 1285 out of 3696 suggests that many faster pairings exist, primarily those with newer CPUs. But the rank also shows that this system outperforms the majority of tested combinations, which is expected given the RTX 3080's high-end position in the GPU hierarchy.
# FAQ
Q: Can this system run The Technomancer at 4K with High settings?
A: No. The measured average at 3840x2160 with High settings is 52.9 FPS, which is below the 60 FPS playable threshold. Medium settings at 64.1 FPS is the highest playable preset at this resolution.
Q: What is the best preset for 1440p gaming?
A: Ultra settings at 2560x1440 produce an average of 72.3 FPS, clearing the 60 FPS bar with a comfortable margin. This is the most demanding preset that remains playable at this resolution.
Q: How much faster is 1080p Ultra compared to 4K Ultra?
A: The 1920x1080 Ultra average is 111.8 FPS, while the 3840x2160 Ultra average is 41.7 FPS. The 1080p result is 2.7 times higher, reflecting the massive pixel count difference between the two resolutions.
Q: Does the Ryzen 5 2600 bottleneck the RTX 3080 in this game?
A: At 1080p and 1440p, the data shows no evidence of a CPU bottleneck, as frame rates remain high across all presets. At 4K, the GPU is clearly the limiting factor, with Low settings at 79.9 FPS and Ultra at 41.7 FPS.
Q: Which resolution gives the best balance of quality and frame rate?
A: 2560x1440 with Ultra settings at 72.3 FPS offers the highest visual preset that stays above 60 FPS. The 4K Medium preset at 64.1 FPS is also viable but requires dropping from Ultra to Medium.
Q: How does this combo compare to other systems in the database?
A: It ranks 1285 out of 3696 tested combinations, placing it in the top 35% of all tested systems for The Technomancer. The CPU and GPU each sit near several rivals with aggregate scores within 1.3% of their respective averages.
# Measured FPS Breakdown
The recorded data includes only average FPS figures; minimum and maximum values were not captured. The following breakdown covers all twelve tested configurations.
At 1920x1080, Low settings average 162.9 FPS. Medium settings average 147.6 FPS. High settings average 140 FPS. Ultra settings average 111.8 FPS. The spread from Low to Ultra is 51.1 FPS, and every preset clears the 60 FPS threshold by a wide margin.
At 2560x1440, Low settings average 139.8 FPS. Medium settings average 113.6 FPS. High settings average 97.9 FPS. Ultra settings average 72.3 FPS. The spread from Low to Ultra is 67.5 FPS. All presets remain above 60 FPS, with Ultra having the smallest margin at 12.3 FPS.
At 3840x2160, Low settings average 79.9 FPS. Medium settings average 64.1 FPS. High settings average 52.9 FPS. Ultra settings average 41.7 FPS. The spread from Low to Ultra is 38.2 FPS. Only Low and Medium clear the 60 FPS threshold, and Medium does so by just 4.1 FPS.
The data shows a consistent pattern: each resolution step up from 1080p to 4K reduces frame rates by roughly 40 to 50 percent at matching presets. The RTX 3080's 10 GB of GDDR6X memory with 760.3 GB/s bandwidth handles the game's textures without apparent memory-related stutters, as the average FPS figures remain stable within each configuration.
# The Verdict
This system can run The Technomancer, but the answer depends entirely on the resolution and preset. Using the 60 FPS playable threshold, the verdict by resolution is clear.
At 1920x1080, all four presets are playable. The best setting is Ultra with an average of 111.8 FPS. This is a thoroughly playable experience with maximum visual quality, leaving substantial headroom above the threshold.
At 2560x1440, all four presets are playable as well. The best setting is Ultra with an average of 72.3 FPS. This clears the threshold by 12.3 FPS, which is a comfortable margin for most gameplay scenarios, though demanding scenes could dip closer to the line.
At 3840x2160, only Low and Medium presets are playable. The best setting is Medium with an average of 64.1 FPS. This clears the threshold by 4.1 FPS, which is a narrow margin. High settings at 52.9 FPS and Ultra at 41.7 FPS fall short of 60 FPS and are not recommended for smooth play.
In summary, the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 3080 pairing is a capable system for The Technomancer at 1080p and 1440p with maximum settings. At 4K, users must compromise to Medium settings, and even then the margin above 60 FPS is slim.
# Similar Performance Alternatives
The nearest rivals in the database provide context for what other hardware would behave similarly to this combination.
On the CPU side, the Ryzen 5 2600's average benchmark score of 21484 is closely matched by four processors. The Intel Core Ultra 5 228V scores 21440, a 0.2% difference, making it effectively interchangeable in compute tasks. The Intel Core i9-11900H scores 21367, a 0.5% difference. The AMD EPYC 9454 scores 21223, a 1.2% difference. The Intel Xeon D-1746TER scores 21635, a 0.7% difference. Any of these CPUs would deliver similar frame rates in The Technomancer, assuming identical GPU and memory configurations.
On the GPU side, the RTX 3080's average benchmark score of 23172 sits near four other cards. The NVIDIA P106-100 scores 23249, a 0.3% difference. The AMD Radeon Pro Vega 16 scores 23250, a 0.3% difference. The AMD Radeon RX 6600M scores 23273, a 0.4% difference. The AMD Radeon R9 M290X scores 23276, a 0.4% difference. These cards would produce comparable aggregate benchmark results, but their real-world gaming performance in The Technomancer could diverge due to driver optimizations and architectural differences.
For a system builder seeking similar overall behavior, swapping the Ryzen 5 2600 for any of the listed CPU rivals would preserve the same CPU-side performance profile. Swapping the RTX 3080 for any of the listed GPU rivals would yield a similar aggregate score, though the 4K Medium preset at 64.1 FPS might shift slightly depending on the specific card's driver behavior and thermal management.
The data indicates that this combo sits in a crowded performance tier. The CPU's rivals span very different market segments, from a low-power Ultrabook chip to a server EPYC processor, yet their compute scores cluster within 1.2% of each other. The GPU's rivals are similarly diverse, including a mining-oriented card and a laptop GPU, yet their aggregate scores stay within 0.4%. This clustering suggests that the Ryzen 5 2600 and RTX 3080 represent a stable performance point that many other hardware combinations approximate.