Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Medium
Horror 2021

The Medium

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
144 FPS
Ultra 1080p Measured
82 FPS

1440p (2K / QHD)

Low 1440p Measured
136 FPS
Ultra 1440p Measured
69 FPS

4K (Ultra HD)

Low 4K Measured
125 FPS
Ultra 4K Measured
54 FPS
9.7ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,470
Your CPU 13,494
Graphics Card
Required 29,366
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 68 95 125
1440p QHD 69 87 113 136
1080p Full HD 82 103 120 144

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 103
1920x1080 Low 144
1920x1080 Medium 120
1920x1080 Ultra 82
2560x1440 High 87
2560x1440 Low 136
2560x1440 Medium 113
2560x1440 Ultra 69
3840x2160 High 68
3840x2160 Low 125
3840x2160 Medium 95
3840x2160 Ultra 54

Performance Analysis: The Medium on Your System

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 5090 D produces a highly unusual performance profile in The Medium, where the GPU’s immense raw power consistently overwhelms the CPU’s four-core architecture. Measured data shows this combination delivers playable frame rates at every tested resolution, but the margin of headroom shrinks dramatically as settings climb to Ultra, revealing a system that is simultaneously over- and under-powered depending on the workload.

Measured FPS Breakdown

At 1920x1080, the combination posts an average of 144 FPS on Low settings, which serves as the ceiling for this pairing. Medium settings drop the average to 120 FPS, with a minimum of 102 FPS and a maximum of 138 FPS. High settings produce 103 FPS on average, while Ultra settings settle at 82 FPS. Every 1080p preset clears the 60 FPS playability threshold by a substantial margin, with even the most demanding preset maintaining an average that is 22 FPS above the playable line.

Moving to 2560x1440, the averages scale downward in a predictable pattern. Low settings yield 136 FPS, Medium produces 113 FPS with a minimum of 96 FPS and a maximum of 130 FPS, High delivers 87 FPS, and Ultra holds 69 FPS. The gap between Low and Ultra at this resolution is 67 FPS, which represents a 49.3% reduction in average frame rate when maxing out the visual preset. The Ultra preset remains comfortably above 60 FPS, but the margin narrows to just 9 FPS.

At 3840x2160, the data reveals the first sign of strain. Low settings average 125 FPS, Medium averages 95 FPS with a minimum of 81 FPS and a maximum of 110 FPS, and High averages 68 FPS. Ultra settings drop to 54 FPS, which falls 6 FPS below the playable threshold. This is the only configuration in the entire dataset that fails to maintain 60 FPS on average. The difference between Low and Ultra at 4K is 71 FPS, a 56.8% performance penalty that pushes the system past its practical limit for maxed-out visuals.

The min/max data provided only for Medium settings across all three resolutions shows consistent frame pacing. At 1080p Medium, the spread from minimum to maximum is 36 FPS. At 1440p Medium, the spread narrows to 34 FPS. At 4K Medium, the spread is 29 FPS. This tightening range at higher resolutions suggests the GPU becomes the more dominant factor in frame delivery, smoothing out the variability that CPU-bound scenarios tend to introduce.

CPU and GPU Roles

The scaling between resolutions indicates that the RTX 5090 D carries most of the rendering burden, while the i3-12100F establishes a performance ceiling at lower resolutions. Comparing 1080p Low at 144 FPS to 4K Low at 125 FPS shows only a 19 FPS drop, which is a modest 13.2% reduction despite a fourfold increase in pixel count. This pattern repeats across presets: High settings drop from 103 FPS at 1080p to 87 FPS at 1440p to 68 FPS at 4K, a cumulative 34% decrease from the lowest to highest resolution.

The CPU’s influence becomes most visible when examining preset scaling at a fixed resolution. At 1080p, moving from Low to Ultra costs 62 FPS (from 144 to 82). At 1440p, the same preset change costs 67 FPS (from 136 to 69). At 4K, the cost is 71 FPS (from 125 to 54). The increasing cost at higher resolutions might seem counterintuitive if the GPU were the sole bottleneck, but the pattern actually reflects the GPU’s ability to render more detailed frames faster than the CPU can feed it instructions.

The i3-12100F’s benchmark scores contextualize its role. In Cinebench R23 multi-core, it scores 11,860 points, while single-core reaches 1,674 points. PassMark multi-thread scores 14,015 and single-thread scores 3,444. These numbers place the CPU at the 68th percentile among all tested CPUs, which is respectable for a quad-core part but far below what a flagship GPU like the RTX 5090 D would typically pair with. The GPU, by contrast, sits at the 92nd percentile among all GPUs with a PassMark G3D score of 44,065.

At 4K Ultra, the 54 FPS average indicates that the GPU is no longer able to compensate for the CPU’s limitations. The 4K High preset at 68 FPS shows that dropping one preset level recovers enough headroom to cross the playable threshold, suggesting that the combination of high resolution and maximum settings creates a scenario where both components are saturated simultaneously.

FAQ

Q: Can this system run The Medium at 60 FPS on Ultra settings at 1920x1080?

A: Yes. The measured average at 1080p Ultra is 82 FPS, which is 22 FPS above the 60 FPS playable threshold.

Q: What is the highest resolution that maintains 60 FPS on Ultra settings?

A: 2560x1440. The average at 1440p Ultra is 69 FPS, while the 3840x2160 Ultra preset drops to 54 FPS, which is below the playable threshold.

Q: How much performance is lost when switching from 1080p to 4K at High settings?

A: The average frame rate drops from 103 FPS at 1080p High to 68 FPS at 4K High, a reduction of 35 FPS or 34% of the original value.

Q: Is the i3-12100F a bottleneck for the RTX 5090 D in this game?

A: The data suggests yes at lower resolutions and higher frame rates. At 1080p Low, the system averages 144 FPS, which is likely near the CPU’s practical limit, while the GPU is capable of far higher output based on its benchmark scores.

Q: Does the system ever drop below 60 FPS in the tested configurations?

A: Only one configuration falls below 60 FPS on average: 3840x2160 Ultra at 54 FPS. All other tested settings and resolutions maintain averages above the playable threshold.

Q: How does the combo rank against other tested configurations in this game?

A: It ranks 145th out of 3,724 tested combinations, placing it in the top 3.9% of all tested systems for The Medium.

The Verdict

This PC can run The Medium at playable frame rates across nearly every tested configuration. The verdict data confirms that 1920x1080 supports all four presets — Low, Medium, High, and Ultra — with the best playable preset being Ultra at 82 FPS average. At 2560x1440, the same full range of presets is playable, with Ultra achieving 69 FPS average. At 3840x2160, the playable settings are Low, Medium, and High, with High being the best playable preset at 68 FPS average. The only configuration that fails to meet the 60 FPS threshold is 4K Ultra at 54 FPS average.

The practical verdict is that this system excels at 1440p and below, where it can run the game at maximum settings with headroom to spare. At 4K, the system requires a one-step reduction from Ultra to High to maintain playability, which is a minor compromise given the resolution’s demanding nature. For users targeting 4K, the data indicates that High settings deliver a smooth experience, while Ultra should be avoided unless frame rate drops below 60 FPS are acceptable.

Similar Performance Alternatives

The CPU’s nearest rivals, based on average benchmark scores, include the Intel Core 3 N355 with a score of 13,492 (0% difference), the Intel Core i5-9500 at 13,452 (0.3% slower), the Intel Core 5 120UL at 13,594 (0.7% faster), and the Intel Core i7-1250U at 13,351 (1.1% slower). These processors would likely produce similar CPU-bound behavior in The Medium, meaning frame rates at 1080p Low would be comparable, but the ceiling might shift slightly depending on single-thread performance.

The GPU’s nearest rivals are the AMD Radeon RX 6650M XT with an average score of 76,904 (1.1% slower), the AMD Radeon RX 6850M XT at 78,940 (1.6% faster), the NVIDIA Tesla P100 PCIe 12 GB at 79,396 (2.1% faster), and the NVIDIA Tesla P100 PCIe 16 GB at 79,605 (2.4% faster). These GPUs would likely deliver frame rates within a few percentage points of the RTX 5090 D in GPU-bound scenarios, such as 4K High settings, where the CPU is less of a limiting factor.

For a user considering alternative hardware, the data suggests that swapping the i3-12100F for any of its nearest CPU rivals would produce negligible changes in overall system performance, as the delta percentages are all within 1.1%. Similarly, GPU alternatives within the nearest rival group would shift results by no more than 2.4%, which is unlikely to change the playability verdict at any resolution.

How This Combo Ranks

The Intel Core i3-12100F and NVIDIA GeForce RTX 5090 D combination ranks 145th out of 3,724 tested combinations for The Medium. This places the system in the top 3.9% of all tested configurations, which is an impressive position given the CPU’s modest four-core, eight-thread design. The ranking reflects the GPU’s dominant contribution to overall gaming performance, as the RTX 5090 D’s 92nd percentile standing among all GPUs far outweighs the CPU’s 68th percentile position.

The rank also illustrates the diminishing returns of pairing a high-end GPU with a low-end CPU. While this combination outperforms the vast majority of tested systems, it likely falls short of what the same GPU could achieve with a more powerful processor. The 4K Ultra result of 54 FPS is a clear indicator that the CPU constrains the GPU’s potential in the most demanding scenarios, even though the overall rank remains strong.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains 60 FPS or higher is Ultra, with an average of 82 FPS. This provides the maximum visual quality while still retaining 22 FPS of headroom above the playable threshold.

At 2560x1440, Ultra is also the best playable preset, averaging 69 FPS. The 9 FPS margin above 60 FPS is sufficient for stable gameplay, though users sensitive to frame drops may prefer High settings at 87 FPS for additional buffer.

At 3840x2160, High is the best playable preset, averaging 68 FPS. Ultra falls below the threshold at 54 FPS, so High represents the optimal balance of visual fidelity and performance at this resolution. The 14 FPS difference between High and Ultra at 4K is the largest single-preset gap in the dataset, highlighting the steep cost of enabling the highest-quality effects at this resolution.