Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
151 FPS
Ultra 1080p Measured
65 FPS

1440p (2K / QHD)

Low 1440p Measured
104 FPS
Ultra 1440p Measured
45 FPS

4K (Ultra HD)

Low 4K Measured
62 FPS
Ultra 4K Measured
27 FPS
11.6ms Frame Time
17ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 84,003
Graphics Card
Required 28,194
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 35 41 62
1440p QHD 45 59 70 104
1080p Full HD 65 86 102 151

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 86
1920x1080 Low 151
1920x1080 Medium 102
1920x1080 Ultra 65
2560x1440 High 59
2560x1440 Low 104
2560x1440 Medium 70
2560x1440 Ultra 45
3840x2160 High 35
3840x2160 Low 62
3840x2160 Medium 41
3840x2160 Ultra 27

Performance Analysis: Rust on Your System

The Intel Core Ultra 9 290K Plus and AMD Radeon RX 9060 combination delivers a highly playable Rust experience at 1080p and 1440p, with 4K limited to lower presets. The data shows a clear pattern: this pairing is capable of exceeding the 60 FPS threshold at every resolution, but only if the settings are chosen to match the resolution’s demands.

Similar Performance Alternatives

The CPU and GPU in this configuration each sit near specific rivals, and the nearest hardware provides a useful reference for what to expect. For the Intel Core Ultra 9 290K Plus, the closest competitor is the Intel Core Ultra 9 285K, which trails by just 0.2% in average benchmark score. This margin is effectively negligible, meaning the 285K would behave nearly identically in Rust’s CPU-bound scenarios. The AMD EPYC 4584PX is 1.1% slower, while the AMD EPYC 9135 is 1.2% slower — both are server-class parts that would deliver similar multi-threaded performance but are unlikely to be purchased for gaming. On the other side, the AMD EPYC 7F72 is 1.3% faster, placing the 290K Plus in a tight cluster where no rival meaningfully outperforms it. In practical terms, any of these CPUs would produce the same frame rates in Rust, as the game’s single-thread and multi-thread demands are well within their capabilities.

On the GPU side, the AMD Radeon RX 9060 sits at the 59th percentile among all GPUs, and its nearest rivals highlight its positioning. The NVIDIA GeForce RTX 3060 Ti is just 0.7% faster in average benchmark score, making it a direct peer — the RX 9060 and RTX 3060 Ti would deliver nearly identical frame rates in Rust at any given resolution and preset. The AMD Radeon R9 370X is 1% slower, and the AMD Radeon RX 7700 is also 1% slower, while the AMD Radeon Pro W5500 is 2.1% slower. Notably, the RX 9060 outperforms two of its three closest rivals, but the deltas are so small that no user would perceive a difference. This GPU is not a class leader, but it is a solid mid-range performer that consistently lands within a few percentage points of its competition. For Rust specifically, the RX 9060’s 8 GB of GDDR6 memory and 288.0 GB/s bandwidth are sufficient to avoid memory bottlenecks at the tested presets, as evidenced by the measured FPS data.

FAQ

Q: Can this PC run Rust at 4K with playable frame rates?

A: Yes, but only at Low settings. The measured average FPS at 3840x2160 with Low settings is 62, which clears the 60 FPS threshold. At Medium, the average drops to 41 FPS, and at High it falls to 35 FPS, so higher presets are not viable at 4K.

Q: What is the best preset for 1440p with this hardware?

A: Medium is the best preset that stays at or above 60 FPS. The average FPS at 2560x1440 with Medium settings is 70, with a minimum of 59 and a maximum of 80. High averages 59 FPS, which is just below the playable threshold, and Ultra averages 45 FPS.

Q: How does the RX 9060 compare to its closest GPU rival in Rust?

A: The RX 9060’s nearest rival is the NVIDIA GeForce RTX 3060 Ti, which is 0.7% faster in average benchmark score. This difference is negligible, so in Rust, both GPUs would produce nearly identical frame rates at the same resolution and settings. The RX 9060 is also 1% faster than the AMD Radeon RX 7700 and 1% faster than the AMD Radeon R9 370X.

Q: Is the CPU or GPU more important for achieving 60 FPS in Rust?

A: The GPU is the primary constraint at 4K, as frame rates drop sharply with higher presets regardless of the CPU’s strength. At 1080p, the CPU’s single-thread performance becomes more relevant, but the 290K Plus’s benchmark scores — including a Cinebench R23 single-core score of 7303 — indicate it is not a limiting factor at any resolution tested.

Q: What frame rates can I expect at 1080p with Ultra settings?

A: The measured average FPS at 1920x1080 with Ultra settings is 65, which is above the 60 FPS threshold. This makes Ultra the best playable preset at 1080p, with High averaging 86 FPS, Medium averaging 102 FPS, and Low averaging 151 FPS.

Q: How does this combination rank among all tested PC configurations for Rust?

A: This CPU-GPU combo ranks 2190 out of 3723 tested combinations, placing it in the upper portion of the field. The data indicates it is a capable mid-to-high-end setup for Rust, with the percentile rankings confirming the CPU is strong (96th percentile among all CPUs) while the GPU is more mid-range (59th percentile among all GPUs).

Measured FPS Breakdown

The measured FPS data for Rust with this hardware spans three resolutions and four settings presets, revealing a clear performance hierarchy. At 3840x2160, the frame rates are as follows: Low settings yield an average of 62 FPS, Medium produces an average of 41 FPS with a minimum of 35 and maximum of 47, High averages 35 FPS, and Ultra drops to 27 FPS. This resolution is the most demanding, and the data shows that only Low settings clear the 60 FPS playable threshold.

At 2560x1440, performance improves substantially. Low settings average 104 FPS, Medium averages 70 FPS with a minimum of 59 and maximum of 80, High averages 59 FPS, and Ultra averages 45 FPS. The jump from 4K to 1440p is significant, with Low settings gaining 42 FPS and Medium gaining 29 FPS. Notably, High at 1440p is borderline — it sits at 59 FPS average, just one frame below the playable threshold, making Medium the safer choice for consistent 60 FPS.

At 1920x1080, the hardware is clearly comfortable. Low settings average 151 FPS, Medium averages 102 FPS with a minimum of 86 and maximum of 117, High averages 86 FPS, and Ultra averages 65 FPS. Every preset at 1080p exceeds the 60 FPS threshold, and even the most demanding Ultra preset maintains a playable average. The minimum FPS at 1080p Medium is 86, which is higher than the average at 4K High, underscoring how resolution scaling affects this GPU.

The scaling pattern across resolutions shows a consistent trend: dropping from 4K to 1440p yields roughly a 40-50% improvement in average FPS at the same setting, while dropping from 1440p to 1080p yields another 30-50% improvement. For example, High settings go from 35 FPS at 4K to 59 FPS at 1440p to 86 FPS at 1080p. This indicates that the RX 9060’s 8 GB memory and 128-bit bus are adequate for 1080p and 1440p, but become a limiting factor at 4K with higher presets.

The Verdict

This PC can run Rust, and it does so comfortably at 1080p and 1440p, with 4K requiring settings adjustments. At 1920x1080, all four presets — Low, Medium, High, and Ultra — are playable, with average frame rates of 151, 102, 86, and 65 FPS respectively. The Ultra preset clears the 60 FPS threshold with an average of 65 FPS, making it the most demanding playable option at this resolution.

At 2560x1440, the playable settings are Low and Medium, with averages of 104 and 70 FPS. High falls just short at 59 FPS average, and Ultra drops to 45 FPS. For a consistent 60 FPS experience at 1440p, Medium is the recommended choice, as it provides a 70 FPS average with a minimum of 59 FPS.

At 3840x2160, the only playable setting is Low, which averages 62 FPS. Medium, High, and Ultra all fall below the threshold at 41, 35, and 27 FPS respectively. While 4K is technically playable, the experience is limited to the lowest preset, and users seeking higher visual quality at 4K would need more GPU power. Overall, the verdict is clear: this system is a strong 1080p machine, a capable 1440p machine, and a marginal 4K machine.

CPU and GPU Roles

The data reveals a clear division of labor between the CPU and GPU in Rust. At 4K, the GPU is the overwhelming bottleneck. The frame rate drops from 62 FPS at Low to 27 FPS at Ultra, a 56% reduction, while the CPU’s workload remains relatively constant. This indicates that the RX 9060’s shading units, TMUs, and ROPs are saturated at high resolutions, and the 8 GB memory capacity is likely a secondary constraint. The CPU’s strong benchmark scores — including a Passmark single-thread score of 4823 and a Cinebench R23 multi-core score of 51731 — are not the limiting factor here.

At 1440p, the balance shifts slightly. The frame rate scaling from Low (104 FPS) to Ultra (45 FPS) still shows GPU dominance, but the margin narrows. Medium’s 70 FPS average with a 59 FPS minimum suggests that the GPU is still the primary constraint, but the CPU’s single-thread performance begins to matter more as frame rates rise. The 290K Plus’s high boost clock of 5.80 GHz and strong single-core scores ensure it does not drag down performance in this range.

At 1080p, the CPU and GPU roles become more balanced. The Ultra preset at 65 FPS and Low at 151 FPS show that the GPU is still doing most of the work, but the CPU’s capability to feed frames becomes relevant at higher FPS levels. The 290K Plus’s 24 cores and 24 threads, along with its 36 MB of shared L3 cache, provide ample headroom for Rust’s simulation and physics logic. The data suggests that at 1080p, the RX 9060 is the limiting factor, but the CPU is well-equipped to handle any frame rate the GPU can produce.

Best Settings per Resolution

For each resolution, the best setting is the most demanding preset that maintains an average of at least 60 FPS. At 3840x2160, the only preset that clears the threshold is Low, with an average of 62 FPS. Medium falls short at 41 FPS, so Low is the definitive choice for 4K playability.

At 2560x1440, Medium is the best setting, averaging 70 FPS with a minimum of 59 and maximum of 80. High averages 59 FPS, which is just barely below the threshold, making Medium the optimal balance of visual quality and performance. The 70 FPS average provides a comfortable margin above 60 FPS, and the 59 FPS minimum indicates rare dips below the target.

At 1920x1080, Ultra is the best setting, averaging 65 FPS. This is the most demanding preset available, and it still clears the 60 FPS threshold. High averages 86 FPS and Medium averages 102 FPS, but Ultra offers the highest visual fidelity while remaining playable. The 65 FPS average at Ultra confirms the RX 9060’s capability at 1080p, and users who prioritize frame rate over visuals can opt for High or Medium for even smoother performance. The data shows that this CPU-GPU combination is well-suited for Rust at mainstream resolutions, with 1080p Ultra and 1440p Medium being the sweet spots.