Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 35 | 41 | 62 |
| 1440p QHD | 45 | 59 | 70 | 104 |
| 1080p Full HD | 65 | 86 | 102 | 151 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The combination of an Intel Core Ultra 5 235 and an AMD Radeon RX 9060 presents a mid-range pairing that sits at a specific performance intersection for Rust. With the CPU ranking in the 89th percentile among all tested processors and the GPU in the 59th percentile, the data reveals a system where the processor has significant headroom, while the graphics card becomes the primary constraint at higher visual demands. The measured frame rates across three resolutions and four presets show a clear pattern of playability that shifts dramatically based on the balance between resolution and settings.
Similar Performance Alternatives
Looking at the CPU's nearest rivals, the Intel Core Ultra 5 235 is virtually indistinguishable from the AMD Ryzen AI 9 HX 375, with a negligible deltaPct of 0.1. In practical terms, swapping between these two processors would yield no observable difference in Rust performance. The Intel Core i9-13900HX sits marginally ahead at a deltaPct of -0.1, meaning it outperforms the Ultra 5 235 by roughly one-tenth of a percent — a difference that falls well within run-to-run variance.
The AMD EPYC 4364P and AMD EPYC 7303 also appear as near-neighbors, each with a deltaPct of 0.2. These server-class chips score essentially identically to the Ultra 5 235 in aggregate benchmarks, though their architectural focus on sustained multi-threaded workloads could translate differently in a game like Rust that does not heavily utilize many cores. The key takeaway is that any of these four alternatives would behave almost exactly the same as the Ultra 5 235 in this context, meaning the CPU is not a point of differentiation.
On the GPU side, the RX 9060 finds its closest match in the NVIDIA GeForce RTX 3060 Ti, which posts an average benchmark score of 16129 against the AMD card's 16014, yielding a deltaPct of -0.7. This places the RX 9060 slightly behind the RTX 3060 Ti, though the margin is small enough that real-world Rust performance would be comparable. The AMD Radeon R9 370X and AMD Radeon RX 7700 both sit at a deltaPct of 1.0, indicating the RX 9060 outperforms them by a full percentage point on average. The AMD Radeon Pro W5500 trails with a deltaPct of 2.1, showing a more noticeable gap.
For Rust specifically, the GPU's nearestRivals suggest that if the RX 9060 were unavailable, the RTX 3060 Ti would be the closest substitute in terms of raw compute. The RX 7700's proximity also makes it a viable alternative, though its 1 percent deficit in average score could manifest as a few frames per second in demanding scenes. This clustering around the 16,000 benchmark score range indicates a performance tier where 1080p gaming is comfortable but 4K requires significant settings compromises.
CPU and GPU Roles
The measured FPS data reveals which component dominates Rust performance at each resolution. At 1920x1080, the Ultra 5 235 and RX 9060 combination delivers 151 FPS on Low settings, rising to 86 FPS on High and 65 FPS on Ultra. The relatively small gap between Low and Ultra — from 151 to 65 FPS — suggests that the GPU is handling most of the rendering load, but the CPU's strong single-threaded performance keeps frame rates from collapsing even at the highest preset. The 86 FPS at High is particularly telling, as it indicates the system is not bottlenecked by the processor at this resolution.
Moving to 2560x1440, the pattern shifts. Low settings yield 104 FPS, Medium drops to 70 FPS, and High falls to 59 FPS. The transition from 1080p to 1440p at Low settings costs roughly 31 percent of the frame rate (151 to 104 FPS), which is a substantial hit. This scaling suggests that while the CPU remains capable, the RX 9060's 8 GB memory buffer and 128-bit bus are beginning to feel the pressure of additional pixels. The drop from Medium (70 FPS) to High (59 FPS) at 1440p is particularly steep, indicating that the GPU's fill rate and memory bandwidth are the limiting factors.
At 3840x2160, the GPU's role becomes even more pronounced. Low settings produce 62 FPS — just barely playable — while Medium drops to 41 FPS and High plummets to 35 FPS. The Ultra preset manages only 27 FPS. This dramatic scaling from 62 to 27 FPS across presets confirms that the RX 9060 is the dominant constraint at 4K. The CPU's performance headroom is irrelevant here because the GPU simply cannot push enough pixels to maintain 60 FPS at higher settings. The data implies that Rust at 4K with this pairing is only viable with the lowest preset, and even then, it barely clears the playable threshold.
Comparing resolution scaling, the system sees a 1080p-to-1440p drop of 31 percent at Low (151 to 104 FPS) but only a 14 percent drop at Ultra (65 to 45 FPS). This inverted scaling pattern suggests that at Ultra settings, both CPU and GPU are saturated, so the resolution change has less relative impact. The 1440p-to-4K transition is far more brutal: Low settings fall from 104 to 62 FPS (40 percent drop), while Medium falls from 70 to 41 FPS (41 percent drop). These consistent percentage losses point squarely at the GPU as the bottleneck at higher resolutions.
Measured FPS Breakdown
At 1920x1080, the benchmark results show a smooth progression across presets. Low settings deliver an average of 151 FPS, which is more than double the playable threshold of 60 FPS. Medium settings drop to 102 FPS, with a minimum of 86 FPS and a maximum of 117 FPS — the only preset in the entire dataset that reports both min and max values. This 86-to-117 FPS range indicates a stable experience with no severe frame drops. High settings average 86 FPS, while Ultra averages 65 FPS. The Ultra preset's 65 FPS average is notable because it remains above the 60 FPS threshold, suggesting that even maximum visual quality is playable at 1080p.
The 2560x1440 resolution presents a more divided picture. Low settings average 104 FPS, well above the playable threshold. Medium settings average 70 FPS, with a minimum of 59 FPS and a maximum of 80 FPS. The 59 FPS minimum is a concern, as it dips just below the 60 FPS mark, indicating occasional stutters in demanding scenes. High settings average 59 FPS — right at the edge of playability — while Ultra falls to 45 FPS, which is clearly not smooth enough for competitive play. The data suggests that 1440p users should stick to Medium or Low for a consistently comfortable experience.
At 3840x2160, the RX 9060 struggles significantly. Low settings average 62 FPS, barely clearing the 60 FPS threshold. Medium settings drop to 41 FPS, with a minimum of 35 FPS and a maximum of 47 FPS — a wide variance that would be noticeable in gameplay. High settings average 35 FPS, and Ultra manages only 27 FPS. None of these higher presets come close to the playable threshold. The 4K data strongly indicates that this GPU is not suited for high-fidelity gaming at this resolution, and even Low settings leave only a 2 FPS margin above the playable cutoff.
FAQ
Q: Can this system run Rust at 1920x1080 with maximum settings?
A: Yes, the data shows the Ultra preset averages 65 FPS at 1080p, which exceeds the 60 FPS playable threshold. The verdictByResolution confirms that all four presets — Low, Medium, High, and Ultra — are playable at this resolution.
Q: What is the best preset for 2560x1440 gaming?
A: Medium settings provide the best balance, averaging 70 FPS with a minimum of 59 FPS. High settings average exactly 59 FPS, which is just below the playable threshold, so Medium is the highest preset that maintains a comfortable average.
Q: Is 4K gaming possible with this combination?
A: Only at Low settings, which average 62 FPS. Medium drops to 41 FPS, High to 35 FPS, and Ultra to 27 FPS. The verdictByResolution lists Low as the only playable setting at 3840x2160.
Q: How does the RX 9060 compare to the RTX 3060 Ti?
A: The RX 9060's average benchmark score is 16014, while the RTX 3060 Ti scores 16129, resulting in a deltaPct of -0.7. This means the RX 9060 is roughly 0.7 percent slower, which is essentially negligible in real-world gaming.
Q: Does the CPU bottleneck the GPU in Rust?
A: At 1080p, the CPU's strong performance keeps frame rates high even at Ultra (65 FPS), but at 4K, the GPU becomes the clear bottleneck. The CPU's 89th percentile ranking versus the GPU's 59th percentile suggests the processor is not the limiting factor.
Q: What is the highest playable preset at 1080p?
A: Ultra settings, which average 65 FPS. This is the most demanding preset that stays above the 60 FPS threshold, making it the recommended choice for maximum visual quality at this resolution.
The Verdict
The data is unambiguous: this PC can run Rust, but the experience varies enormously by resolution. At 1920x1080, the system is fully capable, with all four presets clearing the 60 FPS threshold. The Ultra preset's 65 FPS average means players can enjoy maximum visual fidelity without sacrificing smoothness. This is the resolution where the Intel Core Ultra 5 235 and AMD Radeon RX 9060 combination shines, delivering a comfortable margin above the playable threshold across the board.
At 2560x1440, the system is partially playable. Low and Medium presets both average above 60 FPS, with Medium's 70 FPS being the best high-quality option. However, High settings average exactly 59 FPS, which misses the threshold, and Ultra's 45 FPS is far from smooth. Players at this resolution must choose between graphical fidelity and frame rate, with Medium offering the best compromise.
At 3840x2160, the verdict is stark: only Low settings are playable, and even then, the 62 FPS average leaves just a 2 FPS safety margin. The Medium preset's 41 FPS and Ultra's 27 FPS are both unplayable. The RX 9060's 8 GB memory and 128-bit bus are simply insufficient for 4K gaming in Rust at higher settings. The verdictByResolution confirms this, listing Low as the only playable setting at this resolution.
The overall verdict is that this PC is a solid 1080p machine for Rust, a decent 1440p machine with settings compromises, and a marginal 4K machine that only works at minimum quality. Players seeking a flawless 4K experience would need a more powerful GPU, but for the majority of gamers playing at 1080p or 1440p, this combination delivers playable frame rates.
Best Settings per Resolution
At 1920x1080, the best settings are Ultra, which average 65 FPS. This is the most demanding preset that stays at or above 60 FPS, and it provides the highest visual quality without compromising smoothness. The data shows that all presets are playable at this resolution, so players can confidently select Ultra for the best experience.
At 2560x1440, the best settings are Medium, averaging 70 FPS. This preset strikes the optimal balance between visual quality and performance, as High falls just short of the 60 FPS threshold at 59 FPS. The Medium preset's minimum frame rate of 59 FPS indicates occasional dips, but the 70 FPS average provides enough headroom for a mostly smooth experience.
At 3840x2160, the best settings are Low, averaging 62 FPS. This is the only playable preset at this resolution, and the 62 FPS average barely exceeds the 60 FPS threshold. Players at 4K must accept minimal visual quality to achieve playable frame rates, and even then, the margin is thin. The Medium preset's 41 FPS average is unplayable, so Low is the only viable option.
How This Combo Ranks
Among 3,723 tested combinations in Rust, this pairing of the Intel Core Ultra 5 235 and AMD Radeon RX 9060 ranks 2,190th. This places it in the 41st percentile overall, meaning roughly 59 percent of tested combinations perform better. The ranking reflects the GPU's mid-tier position — the RX 9060's 59th percentile among all GPUs drags down what would otherwise be a high-performing combination, given the CPU's 89th percentile standing.
The substantial gap between the CPU's high percentile and the GPU's mid-tier percentile explains the 2,190th rank. Many combinations with weaker processors but stronger graphics cards would outperform this setup in Rust, particularly at higher resolutions where the GPU dominates. The rank suggests that while this system is perfectly capable at 1080p, it is not a top-tier performer in the broader context of all tested hardware combinations.
For players considering this combo, the ranking indicates that it is a competent but not exceptional choice for Rust. The 1080p performance is strong, but the 4K limitations and the mid-pack overall ranking suggest that enthusiasts seeking maximum performance should look toward combinations with higher-ranked GPUs. The data ultimately portrays a balanced mid-range system that meets the needs of most gamers but leaves room for upgrade paths, particularly on the graphics side.