Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

78%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
138 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
95 FPS
Ultra 1440p Measured
41 FPS

4K (Ultra HD)

Low 4K Measured
56 FPS
Ultra 4K Measured
24 FPS
12.8ms Frame Time
19ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 36,938
Graphics Card
Required 28,194
Your GPU 18,093

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 32 38 56
1440p QHD 41 54 64 95
1080p Full HD 59 78 92 138

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 138
1920x1080 Medium 92
1920x1080 Ultra 59
2560x1440 High 54
2560x1440 Low 95
2560x1440 Medium 64
2560x1440 Ultra 41
3840x2160 High 32
3840x2160 Low 56
3840x2160 Medium 38
3840x2160 Ultra 24

Performance Analysis: Rust on Your System

Similar Performance Alternatives

The Intel Core Ultra 5 225 sits in a tight performance cluster according to the database. Its average benchmark score of 36938 places it within 0.5% of several comparable CPUs. The AMD Ryzen 5 5600F is the closest match, with an average score of 36945, effectively a 0% difference. The AMD Ryzen 5 5500X3D trails by a negligible 0.2%, scoring 37018, while the AMD Ryzen AI 7 PRO 450 (37093) and Intel Core i9-12900T (37112) sit 0.4% and 0.5% ahead respectively. For practical purposes, any of these processors would deliver nearly identical frame pacing in Rust, so choosing between them comes down to platform preferences rather than measurable gaming differences.

On the graphics side, the NVIDIA GeForce RTX 2060 SUPER holds an average benchmark score of 18093, placing it in the 62nd percentile of all GPUs. Its nearest rivals are remarkably close in aggregate performance. The NVIDIA GeForce RTX 3060 Mobile scores 18159, just 0.4% higher, making it a near-twin in raw compute. The AMD Radeon Pro 5700 (18189, 0.5% ahead) and AMD Radeon RX 460 (18373, 1.5% ahead) also fall within the same performance band. Interestingly, the Intel Arc A770M (18383, 1.6% ahead) rounds out this group. If you are considering an alternative to the RTX 2060 SUPER for Rust, any of these would produce similar frame rates, though driver behavior and thermal characteristics may differ in ways not captured by the aggregate scores.

The database ranks this CPU+GPU combination at 2640 out of 3723 tested combos for Rust specifically, which places it in the lower-middle portion of the field. That ranking reflects the pairing of a strong modern CPU with an older mid-range GPU, and the measured results below confirm that the graphics card is the limiting factor at higher resolutions.

FAQ

Q: Can this system maintain 60 FPS at 1920x1080 in Rust?

A: Yes, at 1080p the system clears 60 FPS on three of the four tested presets. Low averages 138 FPS, Medium averages 92 FPS, and High averages 78 FPS. Ultra falls just short at 59 FPS average.

Q: What is the best preset at 2560x1440 for smooth gameplay?

A: Medium is the highest playable preset at 1440p, averaging 64 FPS with a recorded minimum of 54 FPS and maximum of 73 FPS. Low runs at 95 FPS average, while High drops to 54 FPS and Ultra to 41 FPS.

Q: Is 4K gaming viable with this hardware?

A: No. At 3840x2160, no preset clears the 60 FPS threshold. Low averages 56 FPS, Medium averages 38 FPS, High averages 32 FPS, and Ultra averages 24 FPS. The system is not suitable for 4K in Rust.

Q: How does the GPU compare to its direct competitors?

A: The RTX 2060 SUPER scores 18093 on average. The RTX 3060 Mobile is 0.4% higher, the Radeon Pro 5700 is 0.5% higher, the Radeon RX 460 is 1.5% higher, and the Arc A770M is 1.6% higher. These are all effectively equivalent in aggregate performance.

Q: What is the CPU's standing relative to other processors?

A: The Core Ultra 5 225 sits in the 85th percentile of all CPUs with an average benchmark score of 36938. Its nearest rival, the Ryzen 5 5600F, scores 36945, a 0% difference. The Ryzen 5 5500X3D is 0.2% lower, and the Ryzen AI 7 PRO 450 and Core i9-12900T are 0.4% and 0.5% lower respectively.

Q: Does the CPU bottleneck the GPU in Rust?

A: The data suggests the GPU is the limiting factor at higher resolutions. At 1080p Low, the system hits 138 FPS, which is likely CPU-bound, but at 4K even Low only reaches 56 FPS, indicating the GPU cannot keep up with the resolution demand.

Measured FPS Breakdown

The database contains measured frame rates across three resolutions and four quality presets. All values are recorded averages unless otherwise noted, with minimum and maximum figures provided where available.

At 1920x1080, the system performs strongly. Low settings produce an average of 138 FPS. Medium settings average 92 FPS, with a minimum of 79 FPS and a maximum of 106 FPS. High settings average 78 FPS. Ultra settings average 59 FPS, just barely under the 60 FPS threshold. The gap between Low and Ultra is substantial, roughly 79 FPS, which shows that Rust's quality presets have a major impact on this GPU at 1080p.

Moving to 2560x1440, performance drops noticeably. Low settings still deliver a smooth 95 FPS average. Medium settings average 64 FPS, with a minimum of 54 FPS and a maximum of 73 FPS, meaning brief dips below 60 are possible during intense scenes. High settings fall to 54 FPS average, and Ultra drops to 41 FPS. The step from Low to Medium costs 31 FPS, while the step from Medium to High costs another 10 FPS.

At 3840x2160, the system struggles. Low settings average 56 FPS, which is below the playable threshold. Medium settings average 38 FPS, with a minimum of 32 FPS and a maximum of 43 FPS. High settings average 32 FPS, and Ultra averages 24 FPS. The scaling from 1440p to 4K at Medium settings is severe, dropping from 64 FPS to 38 FPS, a 26 FPS loss. This confirms that the RTX 2060 SUPER does not have enough bandwidth or compute headroom for 4K in Rust.

The minimum and maximum figures for Medium settings at each resolution provide insight into frame time consistency. At 1080p, the range is 79 to 106 FPS, a spread of 27 FPS. At 1440p, the range is 54 to 73 FPS, a spread of 19 FPS. At 4K, the range narrows to 32 to 43 FPS, an 11 FPS spread. Lower resolutions produce larger swings, likely because CPU-side bottlenecks and draw call variations become more visible when the GPU is not saturated.

The Verdict

The core question is whether this PC can run Rust at a playable level, defined by the database as 60 FPS or higher. The answer depends entirely on the chosen resolution.

At 1920x1080, the system is playable on High, Low, and Medium presets. The best playable preset is High, which averages 78 FPS. That is comfortably above the 60 FPS threshold with headroom for occasional dips. Ultra is not playable, averaging 59 FPS, which is technically below the mark but close enough that some players might accept it with minor adjustments.

At 2560x1440, the system is playable on Low and Medium presets. The best playable preset is Medium, averaging 64 FPS. This clears the threshold, but the recorded minimum of 54 FPS means there will be moments where frame rate drops below 60. Players sensitive to stutter may prefer Low, which averages 95 FPS and provides a much safer margin. High and Ultra are not playable at this resolution.

At 3840x2160, the system is not playable on any preset. The closest option is Low at 56 FPS average, which falls short of the 60 FPS requirement. All other presets are significantly below the threshold, with Medium at 38 FPS, High at 32 FPS, and Ultra at 24 FPS. The verdict for 4K is clear: this hardware cannot deliver a smooth Rust experience at that resolution.

In summary, this PC is a solid 1080p machine for Rust, a decent 1440p machine with preset compromises, and not viable for 4K. The verdict by resolution from the database confirms this: 1920x1080 has three playable settings with High as the best, 2560x1440 has two playable settings with Medium as the best, and 3840x2160 has zero playable settings.

CPU and GPU Roles

The data reveals how the balance between CPU and GPU shifts across resolutions in Rust. The Core Ultra 5 225 is a high-performing processor, sitting in the 85th percentile of all CPUs with a strong single-thread score of 4412 in Passmark and a multi-thread score of 30459. Its Cinebench R23 multi-core score of 25891 indicates ample headroom for game logic and physics. The RTX 2060 SUPER, by contrast, sits in the 62nd percentile of GPUs with a Passmark G3D score of 16462. This asymmetry is the key to understanding the frame rate data.

At 1920x1080, the CPU is likely the primary driver of maximum frame rates. The jump from Low at 138 FPS to Medium at 92 FPS is a 46 FPS drop, and the drop from Medium to High is another 14 FPS. The GPU is clearly under load, but the high Low-setting frame rate suggests the CPU can push well beyond what the GPU can render at higher presets. The 1080p Ultra result of 59 FPS, so close to the 60 FPS threshold, indicates that the GPU is nearly maxed out while the CPU still has headroom. In this scenario, a faster GPU would meaningfully raise frame rates on Medium and above, while a faster CPU would have little effect on anything except the Low preset.

At 2560x1440, the GPU becomes more clearly the bottleneck. Low settings average 95 FPS, which is still high, but the scaling from Low to Medium (95 to 64 FPS) and Medium to High (64 to 54 FPS) shows the GPU struggling with increased pixel count and shading load. The CPU's role diminishes because the GPU cannot render frames fast enough to expose CPU limitations. The 1440p Medium minimum of 54 FPS suggests that during complex scenes, the GPU's 7.181 TFLOPS of FP32 compute and 448.0 GB/s of memory bandwidth are insufficient to maintain a locked 60.

At 3840x2160, the GPU is the overwhelming bottleneck. The 4K Low average of 56 FPS is lower than the 1440p High average of 54 FPS, showing that resolution scaling affects the GPU more than preset changes. The 4K Ultra average of 24 FPS is a quarter of the 1080p Low average, and the GPU's 8 GB of GDDR6 memory and 256-bit bus are likely saturated. No amount of CPU headroom can compensate here. The Core Ultra 5 225 would perform identically with a much weaker GPU at 4K, because the RTX 2060 SUPER is the limiting factor by a wide margin.

The practical takeaway is that at 1080p, this is a balanced pairing where both components matter. At 1440p, the GPU starts to dominate the performance equation. At 4K, the GPU alone determines the outcome. Players aiming for higher frame rates at 1440p or 4K should prioritize a GPU upgrade, while those staying at 1080p could see modest gains from either component depending on the preset.

Best Settings per Resolution

The database provides clear guidance on the most demanding preset that maintains at least 60 FPS average at each resolution.

At 1920x1080, the best playable preset is High, with an average of 78 FPS. This is the optimal balance of visual quality and performance. Medium runs at 92 FPS and Low at 138 FPS, but High offers the best visuals while still clearing the threshold by a comfortable 18 FPS. Ultra is not recommended, as it averages 59 FPS, falling just short of the 60 FPS mark. The 1080p High preset is the sweet spot for this hardware.

At 2560x1440, the best playable preset is Medium, averaging 64 FPS. This is a tighter margin, only 4 FPS above the threshold, and the recorded minimum of 54 FPS means dips below 60 will occur. Players who prioritize smoothness over visuals should drop to Low, which averages 95 FPS and provides a much larger safety margin. However, for those who can tolerate occasional frame drops, Medium is the highest preset that averages above 60 FPS. High at 54 FPS and Ultra at 41 FPS are not recommended.

At 3840x2160, no preset is playable. The closest is Low at 56 FPS, which is 4 FPS below the threshold. Medium averages 38 FPS, High averages 32 FPS, and Ultra averages 24 FPS. The database lists no playable settings for 4K, meaning this resolution should be avoided entirely with this hardware. Players with 4K monitors should run the game at 1440p or lower to achieve a smooth experience.

In summary, the recommended settings are High at 1080p (78 FPS), Medium at 1440p (64 FPS), and no viable option at 4K. The system is best suited for 1080p gaming, where it can run Rust with high visual fidelity while maintaining solid frame rates. For 1440p, Medium is the ceiling, and for 4K, this combination of CPU and GPU is not sufficient for playable performance.