Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 53 | 59 | 91 |
| 1440p QHD | 68 | 89 | 102 | 156 |
| 1080p Full HD | 95 | 129 | 152 | 224 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The Intel Core i9-14900K paired with the NVIDIA GeForce RTX 3080 Ti delivers a wide range of performance in Rust, scaling from a demanding 4K experience to very high refresh-rate 1080p play. The measured data shows that this combination is capable of clearing the 60 FPS threshold at every tested resolution, though the settings ceiling varies significantly depending on the target resolution.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, which produces an average of 90.7 FPS. The Medium preset at this resolution falls just short of the playable threshold at 59.4 FPS, while High (52.8 FPS) and Ultra (38.5 FPS) are both below 60 FPS.
At 2560x1440, the data shows that all four tested presets clear the 60 FPS bar. The highest playable preset is Ultra, delivering an average of 68.4 FPS. For players preferring higher frame rates, the High preset reaches 89.4 FPS, Medium hits 102.2 FPS, and Low is substantially higher at 156.4 FPS.
At 1920x1080, the full range of presets is playable, with Ultra being the most demanding option that still stays above 60 FPS, averaging 94.6 FPS. The scaling is steep from there: High runs at 128.6 FPS, Medium at 152 FPS, and Low at 224 FPS. The 1080p Ultra result is particularly notable because it remains above the 60 FPS threshold by a comfortable margin, unlike the 1440p Ultra result which is closer to the boundary.
CPU and GPU Roles
The benchmark data indicates that Rust's performance scaling across resolutions is heavily influenced by the GPU, but the CPU headroom provided by the Core i9-14900K prevents it from becoming a bottleneck at lower resolutions. The progression from 1080p to 4K shows a consistent drop in average FPS at every preset, which is typical of a GPU-bound scenario.
At 1920x1080 Low, the system achieves 224 FPS, which is a very high frame rate that demands strong single-thread performance. The Core i9-14900K's PassMark single-thread score of 4697 and Cinebench R23 single-core score of 2262.5 indicate that the CPU has ample capacity to feed the RTX 3080 Ti at this resolution. Moving to 2560x1440 Low, the frame rate drops to 156.4 FPS, a reduction of 30.2% from the 1080p result, which points to the GPU becoming more limiting as pixel count increases.
The gap between resolutions narrows at higher presets. At Ultra settings, the difference between 1080p and 1440p is 26.2 FPS (from 94.6 to 68.4), while the difference between 1440p and 4K is 29.9 FPS (from 68.4 to 38.5). This pattern suggests that at Ultra, the rendering load scales nearly linearly with pixel count, confirming the GPU is the dominant constraint. At Low settings, the same resolution transitions show larger relative drops, with the 1080p to 1440p gap being 67.6 FPS and the 1440p to 4K gap being 65.7 FPS, which further indicates that the CPU is less of a factor as resolution increases.
The RTX 3080 Ti's 12 GB GDDR6X memory and 912.4 GB/s bandwidth provide sufficient memory throughput for Rust's large world data, while the GPU's 34.10 TFLOPS FP32 compute is the primary driver of the frame rate differences between presets. The CPU's 24 cores and 32 threads are not fully utilized in Rust, but the high single-core performance is what allows the system to reach the very high frame rates seen at 1080p Low.
Measured FPS Breakdown
At 3840x2160, the measured average FPS values are as follows: Low runs at 90.7 FPS, Medium at 59.4 FPS, High at 52.8 FPS, and Ultra at 38.5 FPS. The gap between Low and Medium is 31.3 FPS, which is the largest single-preset jump at this resolution. The step from Medium to High is smaller at 6.6 FPS, and the High to Ultra drop is 14.3 FPS. These numbers indicate that the Medium preset is the tipping point where the GPU workload becomes too heavy for a stable 60 FPS experience.
At 2560x1440, the measured results show Low at 156.4 FPS, Medium at 102.2 FPS, High at 89.4 FPS, and Ultra at 68.4 FPS. The scaling from Low to Medium is a 54.2 FPS drop, which is substantial. The Medium to High reduction is 12.8 FPS, and the High to Ultra reduction is 21 FPS. The Ultra result is the only one at this resolution that is close to the 60 FPS threshold, sitting 8.4 FPS above it.
At 1920x1080, the data shows Low at 224 FPS, Medium at 152 FPS, High at 128.6 FPS, and Ultra at 94.6 FPS. The Low to Medium drop is 72 FPS, which is the largest absolute difference across all resolutions and presets. The Medium to High drop is 23.4 FPS, and the High to Ultra drop is 34 FPS. Even the most demanding preset at this resolution, Ultra, remains 34.6 FPS above the playable threshold, giving significant headroom.
No minimum or maximum FPS values are available in the measured data, so all analysis relies on average frame rates. The absence of min/max figures means that frame time consistency cannot be assessed, but the average scores alone are sufficient to determine playability against the 60 FPS threshold.
The Verdict
Based on the verdictByResolution data, this PC can run Rust at all three tested resolutions, but with different preset limitations. At 3840x2160, the only playable setting is Low, which averages 90.7 FPS. The Medium preset at 59.4 FPS is just below the 60 FPS threshold, so it is not considered playable, and High and Ultra are further behind.
At 2560x1440, all four presets are playable. The best settings are Ultra with 68.4 FPS, which clears the threshold by 8.4 FPS. This is the recommended configuration for players who prioritize visual quality at this resolution. The High preset at 89.4 FPS offers a large margin over the threshold, making it a safer choice if frame rate consistency is a concern.
At 1920x1080, every preset is playable, including Ultra at 94.6 FPS. This is the resolution where the combo has the most headroom, with even the most demanding settings staying well above 60 FPS. The Low preset at 224 FPS is suitable for high-refresh-rate displays, though the data does not specify a refresh rate target.
The overall verdict is that the system is fully capable of running Rust at 1080p and 1440p with all presets, and at 4K only with Low settings. The 4K Medium result at 59.4 FPS is a borderline case, falling just short of the playable threshold.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the Intel Core i9-14900KF has an average benchmark score of 79371, which is 0.3% lower than the Core i9-14900K's score of 79097. This means the 14900KF would perform nearly identically in Rust, with a negligible difference in frame rates. The Intel Core Ultra 9 290HX Plus scores 79574, which is 0.6% higher, indicating slightly better CPU-side performance. The AMD EPYC 7413 scores 80041, 1.2% higher, and the AMD Ryzen AI Max+ 395 scores 77740, which is 1.7% lower. For gaming, these differences are minor, so any of these CPUs paired with the RTX 3080 Ti would produce similar results in Rust.
For the GPU, the AMD Radeon Pro 5300 has an average score of 40870, which is 0.8% higher than the RTX 3080 Ti's 41187. This is a surprisingly close match given the different market segments. The NVIDIA Tesla M40 24 GB scores 41707, 1.2% higher, and the NVIDIA Tesla M40 scores 41897, 1.7% higher. The NVIDIA GeForce RTX 5070 scores 40377, which is 2% lower. These deltaPct values are all within a narrow band, meaning that swapping the RTX 3080 Ti for any of these alternatives would result in Rust frame rates that are within a few percent of the measured values.
FAQ
Q: Can this PC run Rust at 60 FPS in 4K?
A: Yes, but only on Low settings, where it averages 90.7 FPS. The Medium preset at 59.4 FPS is below the 60 FPS threshold.
Q: What is the highest preset that stays above 60 FPS at 2560x1440?
A: Ultra settings average 68.4 FPS at this resolution, which is the most demanding preset that clears the playable threshold.
Q: How much faster is 1080p Low compared to 4K Low?
A: At 1920x1080 Low, the average FPS is 224, while at 3840x2160 Low it is 90.7. The 1080p result is 133.3 FPS higher.
Q: Is the CPU or GPU more important for Rust at 4K?
A: The data shows that frame rates drop consistently from 1080p to 4K at every preset, indicating the GPU is the primary constraint at higher resolutions. The CPU's high single-thread score supports very high frame rates at lower resolutions.
Q: What are the playable settings at 1920x1080?
A: All four tested presets are playable at 1080p. The highest is Ultra at 94.6 FPS, and the lowest playable is also Low at 224 FPS.
Q: How does the RTX 3080 Ti compare to the RTX 5070 in terms of average benchmark score?
A: The RTX 3080 Ti has an average score of 41187, which is 2% higher than the RTX 5070's score of 40377.
How This Combo Ranks
This specific combination of the Intel Core i9-14900K and NVIDIA GeForce RTX 3080 Ti ranks 810th out of 3723 tested combos for Rust. This places it in the top 21.8% of all tested systems, which is a strong result given the game's demanding nature. The rank reflects that while the CPU is a top-tier part with a 95th percentile ranking among all CPUs, the GPU's 83rd percentile ranking among all GPUs is the more limiting factor. The combination's position in the ranking indicates that there are many faster configurations, but it also shows that this setup outperforms the majority of tested systems in Rust. The measured frame rates confirm that the combo is well-suited for 1080p and 1440p gaming, with 4K requiring a settings reduction to Low for a smooth experience.