Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

97%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
192 FPS
Ultra 1080p Measured
86 FPS

1440p (2K / QHD)

Low 1440p Measured
136 FPS
Ultra 1440p Measured
60 FPS

4K (Ultra HD)

Low 4K Measured
76 FPS
Ultra 4K Measured
33 FPS
8.8ms Frame Time
13ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 79,097
Graphics Card
Required 28,194
Your GPU 29,945

Recommendations

Optimize Settings

Try lowering shadows and anti-aliasing for better FPS.

GPU Upgrade

A better graphics card would significantly improve performance.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 44 55 76
1440p QHD 60 75 90 136
1080p Full HD 86 113 131 192

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 113
1920x1080 Low 192
1920x1080 Medium 131
1920x1080 Ultra 86
2560x1440 High 75
2560x1440 Low 136
2560x1440 Medium 90
2560x1440 Ultra 60
3840x2160 High 44
3840x2160 Low 76
3840x2160 Medium 55
3840x2160 Ultra 33

Performance Analysis: Rust on Your System

The Intel Core i9-14900K paired with the NVIDIA GeForce RTX 3070 Ti is a high-end combination that places firmly in the upper echelon of tested hardware. For Rust, this pairing delivers playable performance at every resolution tested, though the demands of 4K Ultra settings will push the GPU to its limits. The data indicates a system that is CPU-rich and GPU-capable, leading to a scenario where the graphics card becomes the primary constraint at higher resolutions and quality presets, while the processor ensures frame rates remain high at lower settings.

Similar Performance Alternatives

The CPU and GPU in this combo each have close rivals that would behave nearly identically in a real-world build. For the processor, the Intel Core i9-14900K sits within a tight cluster of high-performance chips. Its nearest rival is the Intel Core i9-14900KF, which scores a negligible 0.3% lower on average. The Intel Core Ultra 9 290HX Plus is also extremely close, trailing by just 0.6%. On the AMD side, the EPYC 7413 is 1.2% behind, while the Ryzen AI Max+ 395 is actually 1.7% ahead. For gaming, any of these would be indistinguishable from the i9-14900K in terms of frame rate delivery, as the differences are well within run-to-run variance.

On the graphics side, the RTX 3070 Ti's closest competitor is the NVIDIA GeForce RTX 5070 Mobile, which scores just 0.1% higher. The AMD Radeon RX 6800 is a near-perfect match, trailing by only 0.5%. The older NVIDIA GeForce RTX 2080 Ti is also a relevant comparison, coming in 0.5% ahead, while the AMD Radeon RX 6700 leads by 1.6%. This means that swapping in any of these GPUs would yield almost identical frame rates in Rust, making them all valid alternatives if the exact model is unavailable or priced differently. The RTX 3070 Ti's 8 GB of GDDR6X memory is a defining characteristic, and these rivals all operate in a similar performance tier, so the overall experience would be comparable.

CPU and GPU Roles

The benchmark data shows a clear shift in system bottleneck depending on resolution and settings. At 1920x1080 with Low settings, the combo produces 192.4 FPS, which is exceptionally high. This indicates that the CPU is feeding the GPU more than enough data, and the graphics card is not the limiting factor. The i9-14900K, with its 24 cores and 32 threads, is more than capable of handling Rust's simulation and entity logic, even in crowded server environments. At this resolution, the RTX 3070 Ti is the primary driver of performance, and the CPU's headroom means frame rates scale directly with graphical load.

As resolution increases, the GPU's workload grows significantly, and the CPU's advantage becomes less pronounced. At 3840x2160, the frame rate drops to 76.4 FPS on Low settings, a 60% reduction from the 1080p Low result. This is a classic sign of GPU limitation. The processor is no longer the bottleneck; instead, the RTX 3070 Ti's 8 GB memory buffer and bandwidth are being saturated by the higher pixel count. Moving from Low to Ultra at 4K further confirms this, as the frame rate falls to 32.9 FPS, a 57% drop. The scaling between presets at 4K is steep, highlighting that the GPU is the dominant factor at this resolution.

At 2560x1440, the balance is more even. The data shows 136.1 FPS on Low, which drops to 60 FPS on Ultra. The CPU still has enough power to push high frame rates at lower settings, but the GPU begins to struggle with the Ultra preset. The pattern is consistent: the i9-14900K provides a strong foundation, but the RTX 3070 Ti dictates the ceiling for visual quality and resolution. For players targeting maximum frame rates at 1080p, the CPU ensures no bottleneck; for those pushing 4K Ultra, the GPU is the sole limiting factor.

Measured FPS Breakdown

The measured data provides a complete picture of performance across three resolutions and four presets. At 1920x1080, the combo is exceptionally fast. Low settings produce an average of 192.4 FPS, which is far beyond the playable threshold. Medium settings still deliver a very smooth 130.8 FPS, and High settings maintain 113 FPS. Even at Ultra, the average stays at 86.2 FPS, which is comfortably above 60 FPS and suitable for high-refresh-rate monitors.

Moving to 2560x1440, performance remains strong but shows the expected decline. Low settings average 136.1 FPS, which is still excellent. Medium settings drop to 89.8 FPS, and High settings reach 75.4 FPS. Ultra settings sit exactly at the playable threshold with 60 FPS average. This resolution is the sweet spot for this combo, offering a wide range of playable presets without forcing a compromise.

At 3840x2160, the GPU bottleneck becomes obvious. Low settings are the only preset that clears the 60 FPS bar, with an average of 76.4 FPS. Medium settings fall to 55.2 FPS, which is below the playable threshold. High settings average 44.3 FPS, and Ultra drops to 32.9 FPS. These numbers indicate that 4K gaming is possible, but only with reduced graphical fidelity. The lack of min and max FPS data means the analysis relies on averages, but the trend is clear: 4K requires Low settings for a stable experience.

How This Combo Ranks

In the database of tested combinations, this specific pairing of an Intel Core i9-14900K and NVIDIA GeForce RTX 3070 Ti ranks 1310 out of 3723 total combos for Rust. This places it in the top 35% of all tested systems. The rank reflects a balance between the extremely powerful CPU and the mid-to-high-end GPU. The i9-14900K is in the 95th percentile for all CPUs, meaning it outperforms the vast majority of processors. The RTX 3070 Ti, meanwhile, sits in the 75th percentile for GPUs, which is solid but not top-tier. The combination of a top-5% CPU with a top-25% GPU results in a system that is slightly CPU-heavy for the GPU's capabilities.

In practical terms, this rank means that many other combos with a weaker CPU but a stronger GPU (like an RTX 4080 or RX 7900 XTX) would outrank this setup in Rust, particularly at 4K. However, the i9-14900K ensures that this combo will not be CPU-limited in any scenario, which is valuable for a game like Rust that can have heavy server-side simulation. The rank of 1310 is not a negative indicator; it simply shows that the GPU is the component that holds this combo back from the top 1000 positions.

The Verdict

Yes, this PC can run Rust, and it does so with confidence at most settings. The verdict data is clear: at 1920x1080, all presets are playable, with Ultra settings averaging 86.2 FPS, which is well above the 60 FPS threshold. At 2560x1440, all presets are also playable, including Ultra, which sits exactly at 60 FPS. This makes 1440p a fully viable resolution for this combo without needing to sacrifice visual quality.

The situation changes at 3840x2160. The only playable setting is Low, which averages 76.4 FPS. Medium, High, and Ultra all fall below 60 FPS, with Ultra being the worst at 32.9 FPS. Therefore, for 4K gaming, the player must accept Low settings to maintain a smooth experience. For those who prioritize frame rate over resolution, this combo is excellent. For those who want 4K Ultra, this is not the right hardware. The data suggests that the RTX 3070 Ti's 8 GB memory and bandwidth are insufficient for the demands of Rust at 4K with higher presets.

Best Settings per Resolution

The optimal settings are determined by finding the most demanding preset that maintains an average of at least 60 FPS. At 3840x2160, the best playable setting is Low, which delivers 76.4 FPS. This is the only preset that meets the threshold. Players at 4K should use Low settings to ensure a consistent frame rate, as Medium drops to 55.2 FPS and would cause noticeable stutter.

At 2560x1440, the best setting is Ultra, which yields exactly 60 FPS. This is a perfect outcome, as it allows for maximum visual fidelity while staying at the playable threshold. All lower presets also work, but Ultra provides the best experience without sacrificing performance. The data shows 136.1 FPS on Low, 89.8 FPS on Medium, and 75.4 FPS on High, so there is headroom to choose based on preference, but Ultra is the recommended target.

At 1920x1080, the best setting is also Ultra, with an average of 86.2 FPS. This leaves a 26 FPS buffer above the threshold, which is comfortable for most situations. The other presets are all faster, with Low at 192.4 FPS, Medium at 130.8 FPS, and High at 113 FPS. For competitive play, players might prefer Low or Medium for the highest frame rates, but Ultra is perfectly playable and offers the best visuals. The recommendation is to run Ultra at both 1080p and 1440p, and drop to Low only when moving to 4K.