Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 28 | 32 | 52 |
| 1440p QHD | 36 | 52 | 60 | 90 |
| 1080p Full HD | 53 | 74 | 85 | 124 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
Intel Core i9-14900K and AMD Radeon RX 6600 is a pairing that presents a stark contrast in capability. The CPU is among the most powerful desktop processors available, while the GPU is a mid-range card from a previous generation. In Rust, this combination produces a wide range of results that depend heavily on resolution and settings, revealing a system where the graphics card is almost always the primary limiter. The data shows a clear story of a CPU with massive headroom and a GPU that is pushed to its limits.
Measured FPS Breakdown
The measured FPS data for this combination in Rust provides a clear picture of its performance envelope across three resolutions and four quality presets. At 1920x1080, the combination performs admirably at lower settings. The Low preset delivers an average of 124.2 FPS, which is the highest score recorded for this hardware pairing. The Medium preset still clears the 60 FPS threshold comfortably with an average of 85.1 FPS. The High preset maintains playability with an average of 73.9 FPS. The most demanding setting, Ultra, drops the average to 53.3 FPS, which falls below the 60 FPS threshold. The data indicates a significant performance cost for the jump from High to Ultra, a difference of 20.6 FPS.
Moving to 2560x1440, the performance scales down as expected. The Low preset remains highly playable with an average of 90.2 FPS. The Medium preset comes very close to the target, with an average of 59.8 FPS, just 0.2 FPS short of the 60 FPS threshold. The High preset drops to 51.6 FPS, and the Ultra preset falls to 36.1 FPS. The performance gap between Low and Medium at this resolution is 30.4 FPS, showing that even modest settings increases can have a substantial impact on frame rates.
At 3840x2160, the RX 6600 is clearly out of its depth. The Low preset is the only one that approaches playability, with an average of 51.9 FPS. The Medium preset drops to 32.2 FPS, High to 28.3 FPS, and Ultra to a low 20.0 FPS. The difference between Low and Medium at 4K is 19.7 FPS. The data shows that the GPU is the bottleneck here, as the i9-14900K's immense processing power cannot compensate for the lack of graphics processing throughput at this high resolution.
CPU and GPU Roles
The data strongly suggests that the AMD Radeon RX 6600 is the primary performance bottleneck in Rust for this system. The evidence is in the scaling between resolutions. When moving from 1920x1080 to 2560x1440 at the Low preset, the average FPS drops from 124.2 to 90.2, a 27.4% reduction. From 2560x1440 to 3840x2160, the Low preset FPS drops from 90.2 to 51.9, a 42.5% reduction. This substantial performance degradation with increasing resolution is a classic sign of a GPU-limited scenario. If the CPU were the limiting factor, the FPS would remain relatively flat across resolutions because the CPU workload would stay the same.
The pattern holds across all presets. At the High preset, the FPS goes from 73.9 at 1080p to 51.6 at 1440p to 28.3 at 4K. The consistent and dramatic drops indicate that the GPU is saturated. The Intel Core i9-14900K, with its 24 cores and 32 threads, has far more processing headroom than a game like Rust typically requires at these settings. The benchmark results indicate that the CPU is waiting on the GPU to finish rendering frames, rather than the other way around. The RX 6600's 8 GB of GDDR6 memory and 128-bit bus are also likely contributing factors to the performance collapses at higher resolutions.
Best Settings per Resolution
For users targeting 60 FPS as a playability threshold, the data offers clear guidance for each resolution. At 1920x1080, the best settings that achieve this goal are the High preset, which delivers an average of 73.9 FPS. This provides a solid margin above the threshold and confirms the CPU's ability to feed frames quickly. The Ultra preset is not recommended at this resolution, as it falls below the target with an average of 53.3 FPS.
At 2560x1440, the options narrow significantly. The only preset that clears the 60 FPS threshold is Low, with an average of 90.2 FPS. The Medium preset is a near-miss, with an average of 59.8 FPS. While this is technically below the 60 FPS target, it is a marginal difference. The data suggests that the best playable setting is Low, providing a substantial FPS buffer. High and Ultra presets are not viable at this resolution for a smooth experience.
At 3840x2160, no preset achieves the playable threshold. The best result is the Low preset with an average of 51.9 FPS, which is still below the 60 FPS target. The data shows that this combination is not suitable for 4K gaming in Rust. Users attempting to play at this resolution would have to accept frame rates in the 20-50 FPS range, which is likely to be a suboptimal experience.
The Verdict
The question of whether this PC can run Rust has a nuanced answer based on the verdictByResolution data. At 1920x1080, the answer is a clear yes. The system can run the game at High settings with an average of 73.9 FPS, well above the 60 FPS threshold. It also runs at Low and Medium settings, achieving 124.2 and 85.1 FPS respectively. The only setting that struggles is Ultra, which averages 53.3 FPS.
At 2560x1440, the answer is a qualified yes. The system can run the game, but only at the Low preset, which achieves 90.2 FPS. All other settings fall short of the 60 FPS target. The Medium preset is extremely close at 59.8 FPS, but the data does not classify it as playable.
At 3840x2160, the answer is no. The system cannot maintain 60 FPS at any settings preset. The closest it gets is 51.9 FPS on Low, which is still below the threshold. The data suggests that this combination is not suited for 4K resolution in Rust. In summary, the system is a capable 1080p performer and a playable 1440p machine only on the lowest settings.
Similar Performance Alternatives
The nearestRivals data for the CPU and GPU provides context on what other hardware would behave similarly. The Intel Core i9-14900K's closest rival is the Intel Core i9-14900KF, which has an average benchmark score that is 0.3% lower. This indicates that the KF variant, which lacks integrated graphics, would deliver virtually identical performance in Rust. The Intel Core Ultra 9 290HX Plus is also very close, with a score 0.6% lower, suggesting similar gaming behavior. The AMD EPYC 7413 has a score 1.2% lower, and the AMD Ryzen AI Max+ 395 is 1.7% higher. In all cases, the performance differences are minimal, meaning any of these CPUs would pair with the RX 6600 in a similar way.
For the GPU, the AMD Radeon RX 6600's nearest rival is the NVIDIA Quadro K6000, with a benchmark score delta of 0%. This is a surprising match, implying that these two very different cards would produce nearly identical frame rates in Rust. The NVIDIA GeForce RTX 4050 Mobile is also a close match, with a score just 0.1% lower, suggesting similar performance. The NVIDIA Tesla K20m is 0.3% lower, and the NVIDIA RTX 2000 Ada Generation is 0.4% higher. This data shows that if a user were to swap the RX 6600 for any of these cards, the FPS in Rust would remain essentially unchanged, with the CPU still having significant headroom.
FAQ
Q: Can this system run Rust at 60 FPS on 1920x1080 with High settings?
A: Yes. The measured average FPS for the High preset at 1920x1080 is 73.9, which is above the 60 FPS playable threshold.
Q: What is the highest playable settings preset at 2560x1440?
A: The only playable preset at 2560x1440 is Low, with an average FPS of 90.2. The Medium preset is very close but falls short at 59.8 FPS.
Q: Is 4K gaming possible with this hardware?
A: No. At 3840x2160, no settings preset achieves an average of 60 FPS. The best result is 51.9 FPS on the Low preset.
Q: Which component is the main bottleneck in Rust?
A: The benchmark data indicates that the AMD Radeon RX 6600 is the primary bottleneck. This is evident from the significant FPS drops when increasing resolution, which is a signature of GPU limitation.
Q: How does the Intel Core i9-14900K compare to its closest rival?
A: The Intel Core i9-14900KF has an average benchmark score that is 0.3% lower, making it an almost identical performer. The Intel Core Ultra 9 290HX Plus is 0.6% lower.
Q: What is the average FPS for the Ultra preset at 1920x1080?
A: The Ultra preset at 1920x1080 averages 53.3 FPS, which is below the 60 FPS playability threshold.
How This Combo Ranks
The comboRankInGame data places this specific CPU and GPU combination at rank 2881 out of 3723 tested combinations. This ranking puts it in the lower 22.6% of all systems tested for Rust. This is a surprisingly low rank for a system with such a powerful CPU. The result suggests that the RX 6600 holds this combination back significantly in the overall ranking, as many other systems with less powerful CPUs but more balanced GPUs likely achieve better performance in Rust. The data implies that the i9-14900K is not contributing to a high rank in this specific game, because the GPU is the limiting factor. The combination's rank is a direct reflection of its GPU-bound performance, which struggles at higher resolutions and presets.