Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 12 | 15 | 18 | 27 |
| 1440p QHD | 20 | 26 | 30 | 45 |
| 1080p Full HD | 28 | 37 | 44 | 66 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The Intel Core i7-14700KF paired with the NVIDIA GeForce GTX 1650 presents a stark contrast in capability within the database’s measured results for Rust. The CPU is a top-tier performer, while the GPU is a modest entry-level part, and the recorded frame rates clearly reflect this bottleneck. Across all tested resolutions and presets, the combination struggles to maintain smooth gameplay, with only a single configuration crossing the 60 FPS threshold.
Measured FPS Breakdown
The measured FPS data for this combo shows a consistent pattern: performance degrades sharply as resolution and graphical load increase. At 3840x2160 (4K), the results are uniformly poor. The High preset averages 15 FPS, while the Low preset reaches only 27 FPS. Medium settings produce an average of 18 FPS, with a recorded minimum of 15 FPS and a maximum of 21 FPS. The Ultra preset is the worst performer at this resolution, dropping to an average of 12 FPS. None of these figures approach playable levels, indicating the GPU is overwhelmed by the pixel count.
Moving to 2560x1440, the situation improves slightly but remains below acceptable thresholds. The High preset averages 26 FPS, while Low settings jump to 45 FPS. Medium settings land at 30 FPS on average, with a min of 26 FPS and a max of 35 FPS. The Ultra preset averages 20 FPS. While the increase from 4K is noticeable, every preset at 1440p still falls short of the 60 FPS playability mark, and even the best case (Low at 45 FPS) leaves significant headroom for frame time spikes.
At 1920x1080, the data shows the only playable configuration. The Low preset achieves an average of 66 FPS, clearing the 60 FPS threshold comfortably. However, stepping up to Medium drops the average to 44 FPS, with a min of 38 FPS and a max of 51 FPS. High settings average 37 FPS, and Ultra falls to 28 FPS. The gap between Low and Medium is substantial (22 FPS), suggesting that the GPU’s 4 GB memory and limited shading power are quickly saturated by higher-quality textures and effects. The min/max data for Medium at 1080p (38 to 51 FPS) indicates noticeable frame pacing variance, which would be perceptible as stutter in a fast-paced survival game.
How This Combo Ranks
Within the database’s testing of Rust, this specific CPU and GPU pairing ranks 3596 out of 3723 tested combinations. That places it in the bottom 4% of all recorded configurations, which is consistent with the measured FPS values. The rank reflects the severe constraint imposed by the GTX 1650, as the i7-14700KF’s high compute potential is largely irrelevant when the GPU cannot render frames fast enough. The percentile data reinforces this: the CPU sits at the 94th percentile among all tested processors, while the GPU rests at the 40th percentile among all tested graphics cards. This 54-point gap between component percentiles is a clear indicator of imbalance, where the graphics card holds back the entire system.
Best Settings per Resolution
Given the playable threshold of 60 FPS, the database’s verdict identifies only one viable configuration. At 3840x2160, no preset achieves 60 FPS, so the best settings are effectively none; the highest recorded average is 27 FPS on Low, which is far below playable. At 2560x1440, the same applies: no preset reaches 60 FPS, with Low being the best at 45 FPS. At 1920x1080, the Low preset is the sole playable option, delivering an average of 66 FPS. This is the most demanding preset that stays at or above 60 FPS, and it is the only setting combination across all resolutions that meets the playability criterion. For users who prioritize visual fidelity over frame rate, the Medium preset at 1080p (44 FPS) is the next step up, but it sacrifices smoothness significantly.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU provide context for what other hardware might behave similarly in this configuration. For the Intel Core i7-14700KF, the closest matches in the database are the AMD Ryzen 7 9700F, with an average benchmark score of 69996 and a delta of 0.2% (slightly lower), the AMD Ryzen 9 7940HX at 69875 (0.4% lower), and the AMD Ryzen 9 7950X at 69515 (0.9% lower). The Intel Core Ultra 7 265K scores 70879, which is 1% higher. These deltas are tiny, meaning any of these CPUs would deliver nearly identical frame rates in Rust when paired with the same GTX 1650, because the GPU remains the limiting factor.
For the GPU, the nearest rivals are notably weaker parts. The AMD Radeon HD 8850M scores 7447 (0.3% lower), the Intel UHD Graphics 750 scores 7441 (0.4% lower), and the AMD Radeon R7 350 scores 7425 (0.6% lower). The Intel Arc A310 scores 7550, which is 1% higher. These comparisons suggest that the GTX 1650’s performance level is roughly equivalent to integrated graphics or very old discrete mobile parts. In practical terms, swapping the GTX 1650 for any of these rivals would yield nearly identical Rust frame rates, since they all sit within a 2% performance band. The data implies that the bottleneck is so severe that even upgrading the GPU to a part with a slightly higher score (like the Arc A310) would not meaningfully change the outcome.
CPU and GPU Roles
The data reveals a clear division of labor between the two components across resolutions. At 3840x2160, the GPU is almost entirely responsible for the low frame rates. The difference between Low (27 FPS) and Ultra (12 FPS) is 15 FPS, a 55% drop, which indicates that the graphics card’s shading units and memory bandwidth are overwhelmed by higher pixel counts and settings. The CPU, despite being in the 94th percentile, cannot compensate because the GPU is the execution bottleneck.
At 2560x1440, the same pattern holds, but the scaling is less severe. Low averages 45 FPS, while Ultra averages 20 FPS, a 25 FPS difference (56% drop). The CPU’s role becomes slightly more apparent at lower settings, as the frame rate rises to 45 FPS, but this is still below the 60 FPS target. The GPU remains dominant in limiting performance.
At 1920x1080, the CPU’s influence becomes more visible. The Low preset hits 66 FPS, which is above the playable threshold, and this is the only point where the i7-14700KF’s strong single-thread performance (Cinebench R23 single-core score of 6235) can push frames higher. However, the jump from Low to Medium (66 to 44 FPS) is a 33% drop, which is disproportionately large compared to the settings change. This indicates that the GPU’s 4 GB memory capacity and 128.1 GB/s bandwidth are immediately saturated by medium-quality textures, forcing the GPU to fall back to lower effective rendering rates. Across all resolutions, the scaling between presets is steeper than the scaling between resolutions, confirming that the GTX 1650 is the primary constraint. The CPU only matters when the GPU is lightly loaded, which happens exclusively at 1080p Low.
FAQ
Q: Can this PC run Rust at 4K?
A: No. The highest recorded average at 3840x2160 is 27 FPS on Low settings. All other presets (High, Medium, Ultra) average between 12 and 18 FPS, far below the 60 FPS playable threshold.
Q: What is the best playable setting for this combination?
A: The only playable configuration is 1920x1080 with Low settings, which averages 66 FPS. No other resolution or preset combination meets the 60 FPS requirement.
Q: How does the GPU compare to its nearest rivals?
A: The GTX 1650’s average benchmark score is 7472, with rivals like the AMD Radeon HD 8850M (7447) and Intel UHD Graphics 750 (7441) within 0.4% of its performance. The Intel Arc A310 is 1% faster, but none of these differences would alter Rust’s frame rates meaningfully.
Q: Is the CPU or GPU the bottleneck?
A: The GPU is the clear bottleneck. The CPU ranks in the 94th percentile among all processors, while the GPU sits in the 40th percentile. The frame rates drop sharply with higher graphics presets, but the CPU’s high single-core score (6235 in Cinebench R23) only helps at 1080p Low, where the GPU is less stressed.
Q: What frame rates can be expected at 1440p?
A: At 2560x1440, the best case is Low settings at 45 FPS. Medium averages 30 FPS, High averages 26 FPS, and Ultra averages 20 FPS. None of these reach the 60 FPS playable threshold.
Q: Does the Medium preset at 1080p provide smooth gameplay?
A: No. Medium at 1920x1080 averages 44 FPS, with a minimum of 38 FPS and a maximum of 51 FPS. While the average is above 30 FPS, the frame time variance and sub-60 FPS average make it unsuitable for smooth play.
The Verdict
Can this PC run Rust? The answer is conditional and narrow. Based on the database’s measured results, the combination of Intel Core i7-14700KF and NVIDIA GeForce GTX 1650 can run Rust, but only at 1920x1080 with Low settings, where it achieves an average of 66 FPS. This is the sole configuration that clears the 60 FPS playable threshold. At 2560x1440 and 3840x2160, no preset reaches 60 FPS, with the best cases being 45 FPS (1440p Low) and 27 FPS (4K Low) respectively. The verdict by resolution confirms this: 1080p has one playable setting (Low), while 1440p and 4K have zero playable settings. For users who require higher visual quality or higher resolutions, this pairing is not suitable for Rust. The GPU’s limitations are so pronounced that the powerful CPU is effectively wasted in this game, as the graphics card cannot translate the processor’s compute headroom into additional frames. If the goal is to play Rust smoothly, this configuration demands a GPU upgrade; if the goal is to play at 1080p Low, it meets the minimum requirement, but with no margin for demanding scenes or future updates.