Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

88%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
212 FPS
Ultra 1080p Measured
91 FPS

1440p (2K / QHD)

Low 1440p Measured
146 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
86 FPS
Ultra 4K Measured
37 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 70,163
Graphics Card
Required 28,194
Your GPU 23,877

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 37 49 58 86
1440p QHD 63 83 98 146
1080p Full HD 91 120 142 212

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 120
1920x1080 Low 212
1920x1080 Medium 142
1920x1080 Ultra 91
2560x1440 High 83
2560x1440 Low 146
2560x1440 Medium 98
2560x1440 Ultra 63
3840x2160 High 49
3840x2160 Low 86
3840x2160 Medium 58
3840x2160 Ultra 37

Performance Analysis: Rust on Your System

The Intel Core i7-14700KF paired with the AMD Radeon RX 9070 is a high-end desktop combination built around a 20-core, 28-thread Raptor Lake Refresh processor and a Navi 48-based GPU with 16 GB of GDDR6 memory. In Rust, this pairing delivers a wide range of performance depending on resolution and settings, with the data showing a clear progression from unplayable 4K Ultra to a very smooth 1080p experience. The following analysis walks through the measured FPS data, how this combo ranks against other tested systems, and what settings yield the best results at each resolution.

FAQ

Q: Can this PC run Rust at 4K resolution?

A: Yes, but only on Low settings. The measured data shows an average of 86 FPS at 3840x2160 on Low, which clears the 60 FPS playable threshold. High, Medium, and Ultra presets at 4K all fall below 60 FPS, with averages of 49, 58, and 37 FPS respectively.

Q: What is the best settings preset for 1440p?

A: Ultra is the best playable preset at 2560x1440, delivering an average of 63 FPS. This is the most demanding preset that stays at or above the 60 FPS threshold. Lower presets yield higher averages: High at 83 FPS, Medium at 98 FPS, and Low at 146 FPS.

Q: How does the combo perform at 1080p?

A: All four tested presets — Low, Medium, High, and Ultra — clear 60 FPS at 1920x1080. The Ultra preset averages 91 FPS, while Low reaches 212 FPS. Medium and High sit in between at 142 and 120 FPS respectively.

Q: What is the combo's rank among all tested hardware combinations?

A: This combo ranks 1068 out of 3723 tested combinations in Rust, placing it in the top portion of the database. The rank reflects overall performance across all tested settings and resolutions.

Q: How much faster is the CPU than its nearest rival?

A: The Intel Core i7-14700KF has an average benchmark score of 70163, which is 0.2% higher than the AMD Ryzen 7 9700F's score of 69996. It is also 0.4% ahead of the AMD Ryzen 9 7940HX and 0.9% ahead of the AMD Ryzen 9 7950X.

Q: Which GPU rival is closest in performance?

A: The AMD Radeon RX 9070's average score of 23877 is 0.6% higher than the NVIDIA GeForce GTX TITAN Z's 23736. The AMD Radeon RX 6800S is 0.8% lower, and the NVIDIA GeForce RTX 2080 SUPER is 1.2% lower.

CPU and GPU Roles

The benchmark data reveals a clear pattern in how the CPU and GPU contribute to Rust's performance across resolutions. At 3840x2160, the GPU is the dominant constraint. The average FPS drops dramatically between Low (86 FPS) and High (49 FPS), a 43% reduction, and further to 37 FPS on Ultra. This steep decline with increasing graphical load indicates that the RX 9070's rendering capabilities are the limiting factor at 4K. The CPU's 20 cores and 28 threads are sufficient to feed the GPU at this resolution, as evidenced by the 86 FPS on Low settings, but the GPU cannot maintain high frame rates when the pixel count and shader complexity rise.

Moving to 2560x1440, the balance shifts. The Low preset averages 146 FPS, which is much higher than the 86 FPS at 4K Low, showing that the GPU still has headroom when pixel count drops by roughly 44%. However, the spread between Low and Ultra at 1440p (146 to 63 FPS) is still substantial. The Medium preset's average of 98 FPS with minimums of 83 and maximums of 113 suggests a consistent experience. At this resolution, the CPU's single-thread performance — reflected in its Cinebench R23 single-core score of 6235 — becomes more relevant, as Rust's simulation and entity updates often stress fewer threads. The combination handles this well, but the GPU still dictates the ceiling on higher presets.

At 1920x1080, the CPU's role becomes more prominent. The Low preset hits 212 FPS, which is a 45% jump over the 1440p Low figure. This scaling indicates that the GPU is no longer the bottleneck at lower resolutions; instead, the CPU's ability to process game logic and draw calls limits the maximum frame rate. The i7-14700KF's high boost clock of 5.60 GHz and strong single-core scores support this interpretation. The gap between Low (212 FPS) and Ultra (91 FPS) at 1080p is still large, but the fact that Ultra stays above 90 FPS shows that both components are working effectively. The data suggests that for 1080p gaming, the CPU matters more for achieving the highest possible frame rates, while the GPU handles the visual fidelity increases.

How This Combo Ranks

The combo rank of 1068 out of 3723 tested combinations places this system in the 71st percentile of all tested hardware pairings in Rust. This means roughly 71% of tested combos score lower, while 29% score higher. Given that the GPU's percentile against all GPUs is 69 and the CPU's percentile against all CPUs is 94, the combo's ranking is heavily influenced by the GPU's relative position. The CPU is far stronger than the GPU in terms of raw benchmark percentiles, but Rust's performance at higher resolutions is more dependent on GPU throughput.

The rank is a composite measure across all resolutions and presets. At 1080p, this combo would likely rank higher due to the CPU's strength, as the 212 FPS on Low and 91 FPS on Ultra are strong figures. At 4K, the rank would be lower, as the 37 FPS on Ultra and 49 FPS on High fall below the playable threshold. The 1440p results, where Ultra averages 63 FPS, sit in a middle ground. The overall rank of 1068 reflects this balanced but not top-tier performance — the system is capable but not among the elite for 4K gaming.

Compared to other combos in the database, this pairing's rank suggests it is well-suited for 1080p and 1440p gaming, with playable settings at all presets up to Ultra at both resolutions. The 4K experience is limited to Low settings, which is consistent with the GPU's 69th percentile ranking. Users prioritizing high refresh rates at 1080p will find this combo strong, while those targeting 4K Ultra would need a more powerful GPU.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the AMD Ryzen 7 9700F has an average benchmark score of 69996, which is 0.2% lower than the i7-14700KF's 70163. This means the Ryzen 7 9700F would deliver nearly identical performance in CPU-bound scenarios, such as Rust at 1080p on Low settings. The AMD Ryzen 9 7940HX, with a score of 69875, is 0.4% lower, and the AMD Ryzen 9 7950X at 69515 is 0.9% lower. These differences are within a single percentage point, so any of these CPUs would behave similarly in Rust, with frame rate differences likely within the margin of measurement error. The Intel Core Ultra 7 265K is the only rival that scores higher, at 70879, which is 1% above the i7-14700KF. This suggests a marginal advantage for the Core Ultra 7 265K in CPU-limited scenarios.

For the GPU, the AMD Radeon RX 9070's average score of 23877 is 0.6% higher than the NVIDIA GeForce GTX TITAN Z's 23736. This makes the TITAN Z the closest performance match, with differences that would be imperceptible in real-world gaming. The AMD Radeon RX 6800S scores 24063, which is 0.8% higher than the RX 9070. The NVIDIA GeForce RTX 3080 Mobile at 23628 is 1.1% lower, and the NVIDIA GeForce RTX 2080 SUPER at 24170 is 1.2% higher. All four rivals sit within a 1.2% range of the RX 9070, meaning that swapping to any of these GPUs would produce nearly identical frame rates in Rust. None of these alternatives would change the fundamental performance profile: 1080p and 1440p would remain playable at all presets, while 4K would still require Low settings to exceed 60 FPS.

Best Settings per Resolution

At 3840x2160, the only preset that stays at or above 60 FPS is Low, which averages 86 FPS. Medium comes close at 58 FPS but falls short of the threshold, and High (49 FPS) and Ultra (37 FPS) are further behind. For a smooth 4K experience, Low is the recommended setting.

At 2560x1440, all four presets clear the 60 FPS threshold. The most demanding preset that remains playable is Ultra, which averages 63 FPS. This is the best choice for visual quality while maintaining playability. High (83 FPS), Medium (98 FPS), and Low (146 FPS) all offer higher frame rates for those who prefer smoother gameplay over visual fidelity.

At 1920x1080, Ultra is again the best playable preset, averaging 91 FPS. This provides a comfortable margin above the 60 FPS threshold while delivering the highest visual quality. High (120 FPS), Medium (142 FPS), and Low (212 FPS) all exceed 120 FPS, making them suitable for high-refresh-rate monitors. For the best balance of visuals and performance, Ultra is the recommended setting at 1080p.

The Verdict

This PC can run Rust effectively at all three tested resolutions, but the settings ceiling varies. At 3840x2160, the system clears the 60 FPS threshold only on Low settings, with an average of 86 FPS. Medium is close at 58 FPS, but it does not meet the playable threshold. At 2560x1440, the verdict is positive across the board: Low (146 FPS), Medium (98 FPS), High (83 FPS), and Ultra (63 FPS) all exceed 60 FPS, making this resolution the sweet spot for balancing visual quality and performance. At 1920x1080, the system performs exceptionally well, with even Ultra averaging 91 FPS and Low reaching 212 FPS.

The data indicates that this combo is best suited for 1080p and 1440p gaming, where it can handle the most demanding presets without issue. For 4K, users must accept Low settings to maintain playability, which may not be ideal for those seeking high-fidelity visuals. The CPU's strength ensures that frame rates at lower resolutions are not CPU-bound, while the GPU's performance is adequate for mainstream gaming but not for 4K Ultra. Overall, this system is a capable Rust machine for most users, provided they adjust settings appropriately for their chosen resolution.

Measured FPS Breakdown

At 3840x2160, the data shows a clear drop as settings increase. Low averages 86 FPS. Medium averages 58 FPS, with a minimum of 49 and a maximum of 67. High averages 49 FPS. Ultra averages 37 FPS. No minimum or maximum values are recorded for Low, High, or Ultra, but the Medium data suggests a variance of about 18 FPS between minimum and maximum.

At 2560x1440, performance improves substantially. Low averages 146 FPS. Medium averages 98 FPS, with a minimum of 83 and a maximum of 113. High averages 83 FPS. Ultra averages 63 FPS. The Medium preset shows a 30 FPS spread between minimum and maximum, indicating some frame time variability but still maintaining a solid average.

At 1920x1080, the system shows its strongest results. Low averages 212 FPS. Medium averages 142 FPS, with a minimum of 121 and a maximum of 164. High averages 120 FPS. Ultra averages 91 FPS. The Medium preset's minimum of 121 FPS means even the lowest recorded frame rate stays well above the 60 FPS threshold, ensuring a consistently smooth experience across all settings at this resolution.