Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

50%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
99 FPS
Ultra 1080p Measured
44 FPS

1440p (2K / QHD)

Low 1440p Measured
66 FPS
Ultra 1440p Measured
32 FPS

4K (Ultra HD)

Low 4K Measured
42 FPS
Ultra 4K Measured
19 FPS
18.9ms Frame Time
28ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 53,620
Graphics Card
Required 28,194
Your GPU 0

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Available

Your GPU supports ray tracing but may impact FPS.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 19 22 26 42
1440p QHD 32 41 47 66
1080p Full HD 44 53 66 99

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 53
1920x1080 Low 99
1920x1080 Medium 66
1920x1080 Ultra 44
2560x1440 High 41
2560x1440 Low 66
2560x1440 Medium 47
2560x1440 Ultra 32
3840x2160 High 22
3840x2160 Low 42
3840x2160 Medium 26
3840x2160 Ultra 19

Performance Analysis: Rust on Your System

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 3050 4 GB delivers a playable Rust experience only at 1080p and 1440p, and only when settings are kept in check. At 4K, no tested preset reaches the 60 FPS playable threshold, making that resolution a non-starter for this combo. The data indicates this pairing is best suited for 1080p Medium settings, where it maintains an average of 65.6 FPS, or 1440p Low settings, where it averages 66.2 FPS.

Best Settings per Resolution

1920x1080 (1080p): The most demanding preset that stays at or above 60 FPS is Medium, yielding an average of 65.6 FPS. This is the sweet spot for this resolution. Pushing to High drops the average to 53.1 FPS, which falls below the 60 FPS threshold, while Ultra sits at 43.7 FPS. Low settings push performance much higher to 98.5 FPS, but Medium offers the best balance of visual fidelity and playable frame rates.

2560x1440 (1440p): Only Low settings achieve the 60 FPS target, with an average of 66.2 FPS. Medium falls short at 47.4 FPS, High at 41 FPS, and Ultra at 31.8 FPS. At this resolution, the GPU becomes a clear bottleneck, and the data shows no room for higher presets without sacrificing smoothness.

3840x2160 (4K): No settings are playable. The best result comes from Low settings at 41.9 FPS, which is well below the 60 FPS target. Medium (25.6 FPS), High (22.3 FPS), and Ultra (19.3 FPS) are all far from playable. The verdict by resolution confirms this, listing no playable settings for 4K.

CPU and GPU Roles

The benchmark results show a classic GPU-limited scenario at higher resolutions, with the CPU having more influence at 1080p. The Intel Core i7-14700F is a high-end 20-core, 28-thread processor with a strong single-thread score of 4958 in Cinebench R23, putting it in the 91st percentile of all CPUs. This headroom means the CPU is rarely the limiting factor in Rust.

At 1080p, the gap between Low (98.5 FPS) and Ultra (43.7 FPS) is a 54.8 FPS drop, showing that the GPU struggles as settings increase. However, the CPU's strength is evident in the fact that even at 1080p Ultra, the frame rate stays above 40 FPS, which is respectable for a 4 GB card. Moving from 1080p Low to 1440p Low sees a drop from 98.5 FPS to 66.2 FPS, a 32.3 FPS reduction that is purely resolution-driven. This scaling indicates the GPU is being pushed harder.

At 1440p and 4K, the GPU's limitations are stark. The 4 GB VRAM and 128-bit memory bus (192.0 GB/s bandwidth) are insufficient for higher settings. From 1440p High (41 FPS) to 4K High (22.3 FPS), the frame rate nearly halves, confirming that the RTX 3050 is the primary constraint at higher resolutions. The CPU, with its high Cinebench R23 multi-core score of 35122, is not the bottleneck here; the data shows that the GPU's rendering capability dictates performance at 1440p and above.

Measured FPS Breakdown

1920x1080:

  • Low: Average 98.5 FPS
  • Medium: Average 65.6 FPS
  • High: Average 53.1 FPS
  • Ultra: Average 43.7 FPS

At 1080p, the RTX 3050 shows a linear degradation as settings climb. Low settings nearly double the frame rate of Ultra, which is typical for a GPU with limited VRAM and bandwidth. The jump from Medium to High is a 12.5 FPS loss, while High to Ultra is a smaller 9.4 FPS loss, suggesting the card handles the transition to Ultra worse than expected.

2560x1440:

  • Low: Average 66.2 FPS
  • Medium: Average 47.4 FPS
  • High: Average 41 FPS
  • Ultra: Average 31.8 FPS

At 1440p, only Low remains comfortably playable. The drop from Low to Medium is 18.8 FPS, which is significant. High settings only lose 6.4 FPS from Medium, but they are still far below the playable threshold. Ultra falls to 31.8 FPS, making it unsuitable for smooth gameplay.

3840x2160:

  • Low: Average 41.9 FPS
  • Medium: Average 25.6 FPS
  • High: Average 22.3 FPS
  • Ultra: Average 19.3 FPS

4K is unplayable across the board. Even Low settings struggle to hold above 42 FPS. Medium, High, and Ultra all cluster in the 19–26 FPS range, indicating that the card's 4 GB VRAM is completely saturated and the 192.0 GB/s bandwidth is insufficient for 4K textures and geometry. The data shows no viable path to 60 FPS at 4K with this hardware.

Similar Performance Alternatives

The CPU's nearest rivals, based on average benchmark scores, provide context for its performance tier. The Intel Core i7-14700F has an average benchmark score of 53620. Its closest competitor is the Intel Xeon 6505P, which scores 53701, a delta of -0.2% (essentially identical). The Intel Xeon Phi 7290 scores 53469, a 0.3% delta, and the AMD Ryzen 9 7900X scores 53288, a 0.6% delta. The AMD EPYC 7313P scores 53206, a 0.8% delta. In practical terms, any of these CPUs would deliver nearly identical frame rates in Rust. The i7-14700F is not a unique performer; it sits firmly within a cluster of high-end processors, all within 1% of each other in average score. For gaming, the Ryzen 9 7900X is the most likely alternative you'd encounter in a desktop build, and the data suggests no measurable difference in Rust performance.

The GPU has no nearestRivals listed in the data pack, meaning no direct comparison scores are available. However, its percentileVsAllGpus of 50 indicates it sits exactly at the median of all GPUs. This is a mid-range card, and the measured FPS data reflects that. Without rival scores, the analysis must rely on the absolute FPS numbers. The RTX 3050 4 GB is capable at 1080p Medium and 1440p Low, but its 4 GB VRAM is a clear limitation for higher settings or resolutions.

How This Combo Ranks

This combination ranks 3251 out of 3723 tested combos in Rust. That places it in the bottom 13% of all systems tested. This low ranking is directly attributable to the GPU. The CPU is a strong performer, ranking in the 91st percentile of all CPUs, but the GPU's 50th percentile standing drags the overall combo down. The data shows that while the CPU has ample headroom, the GPU cannot translate that into high frame rates at demanding settings.

The ranking reflects that the RTX 3050 4 GB is simply outclassed by most other GPUs in the database for a game like Rust, which is known for its demanding rendering. The combo is functional, but it is not competitive with even mid-range alternatives. If you are comparing systems, this pairing should be seen as a baseline for 1080p gaming, not a high-performance setup. The 4 GB VRAM is the primary weakness, as it forces the system to use Low or Medium settings at 1080p to maintain 60 FPS.

FAQ

Q: Can this combo run Rust at 60 FPS on 1080p?

A: Yes, but only on Low (98.5 FPS) or Medium (65.6 FPS) settings. High settings drop to 53.1 FPS, and Ultra falls to 43.7 FPS.

Q: Is 1440p playable with this hardware?

A: Only on Low settings, which average 66.2 FPS. Medium (47.4 FPS), High (41 FPS), and Ultra (31.8 FPS) all fail to reach the 60 FPS playable threshold.

Q: What is the best setting for 4K?

A: There is no playable setting at 4K. The highest average FPS is 41.9 on Low, which is still well below the 60 FPS target.

Q: Is the CPU or GPU the bottleneck in this system?

A: The GPU is the bottleneck at all resolutions. The CPU is in the 91st percentile of all CPUs, while the GPU is in the 50th percentile. The FPS drops between settings and resolutions clearly follow the GPU's capabilities.

Q: How does this combo rank compared to other tested systems?

A: It ranks 3251 out of 3723 combos, placing it in the bottom 13% of all tested configurations for Rust.

Q: Would a different CPU of similar performance change the results?

A: No. The CPU's nearest rivals, such as the AMD Ryzen 9 7900X or Intel Xeon 6505P, have average scores within 0.8% of the i7-14700F, so the frame rates would be effectively identical. The GPU's 4 GB VRAM is the limiting factor.