Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

89%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
138 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
95 FPS
Ultra 1440p Measured
41 FPS

4K (Ultra HD)

Low 4K Measured
56 FPS
Ultra 4K Measured
24 FPS
12.8ms Frame Time
19ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 53,620
Graphics Card
Required 28,194
Your GPU 24,442

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 32 37 56
1440p QHD 41 54 64 95
1080p Full HD 59 78 92 138

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 138
1920x1080 Medium 92
1920x1080 Ultra 59
2560x1440 High 54
2560x1440 Low 95
2560x1440 Medium 64
2560x1440 Ultra 41
3840x2160 High 32
3840x2160 Low 56
3840x2160 Medium 37
3840x2160 Ultra 24

Performance Analysis: Rust on Your System

The Intel Core i7-14700F paired with the AMD Radeon RX 6600 XT delivers a workable but resolution-dependent experience in Rust. Benchmark data shows the combo clearing the 60 FPS playable threshold at 1080p and 1440p with specific settings, while 4K remains out of reach. The following analysis breaks down the measured performance, optimal settings, and how this hardware stacks up against alternatives.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains an average of at least 60 FPS is High. The measured average at this setting is 78 FPS, leaving a comfortable margin above the playable threshold. While Ultra settings produce an average of 59 FPS, that falls just below the 60 FPS line, making High the optimal choice for visual fidelity without sacrificing smoothness.

At 2560x1440, the best playable setting is Medium, with a measured average of 64 FPS. Low settings also clear the threshold at 95 FPS, but Medium provides a better balance between visual quality and performance. High settings dip to 54 FPS, which is below the playable mark, and Ultra drops further to 41 FPS.

At 3840x2160, no preset reaches 60 FPS. The best result comes from Low settings at 56 FPS, just under the threshold, while High, Medium, and Ultra average 32, 37, and 24 FPS respectively. The verdict data confirms no playable settings exist at this resolution.

FAQ

Q: Can this PC run Rust at 60 FPS on 1080p?

A: Yes. At 1920x1080, High settings average 78 FPS, Medium averages 92 FPS, and Low averages 138 FPS. Ultra just misses the mark at 59 FPS average.

Q: What is the best setting for 1440p with this combo?

A: Medium is the highest preset that stays playable, averaging 64 FPS. Low settings average 95 FPS, while High and Ultra fall below the threshold at 54 and 41 FPS.

Q: Is 4K gaming possible with the RX 6600 XT and i7-14700F in Rust?

A: No. At 3840x2160, the best average is 56 FPS on Low settings. Medium averages 37 FPS, High averages 32 FPS, and Ultra averages 24 FPS. No settings reach the 60 FPS playable threshold.

Q: How does the combo rank among all tested configurations?

A: The combo ranks 2671st out of 3723 tested combinations for this game, placing it in the lower portion of the field but still capable of playable framerates at mainstream resolutions.

Q: What is the minimum FPS at 1440p Medium settings?

A: The measured minimum at 2560x1440 Medium is 54 FPS, with a maximum of 73 FPS and an average of 64 FPS.

Q: Does the Ultra preset ever reach 60 FPS at any resolution?

A: No. Ultra averages 59 FPS at 1080p, 41 FPS at 1440p, and 24 FPS at 4K. The preset remains below the playable threshold across all tested resolutions.

Measured FPS Breakdown

At 1920x1080, performance scales predictably across presets. Low settings deliver a strong 138 FPS average, which drops to 92 FPS at Medium. The Medium preset shows a minimum of 78 FPS and a maximum of 106 FPS. High settings average 78 FPS, while Ultra falls to 59 FPS average. The gap between Low and Ultra is substantial, reflecting the heavy GPU load imposed by higher quality settings.

At 2560x1440, the framerate drop from 1080p is significant. Low settings average 95 FPS, a reduction of 43 FPS compared to the same preset at 1080p. Medium averages 64 FPS with a minimum of 54 FPS and maximum of 73 FPS. High settings average 54 FPS, and Ultra drops to 41 FPS. The progression from Low to Ultra shows a steady decline, with the gap between Medium and High being particularly notable at 10 FPS.

At 3840x2160, the RX 6600 XT struggles to maintain playable framerates. Low settings average 56 FPS, just short of the 60 FPS target. Medium averages 37 FPS with a minimum of 32 FPS and maximum of 43 FPS. High settings average 32 FPS, and Ultra averages 24 FPS. The step from Low to Medium costs nearly 19 FPS, indicating that the 8 GB frame buffer and 128-bit memory bus are taxed heavily at this resolution.

Across all resolutions, the pattern is consistent: Low settings provide the highest headroom, Medium offers a balanced experience at 1080p and 1440p, and Ultra is only viable at 1080p where it narrowly misses the playable threshold.

Similar Performance Alternatives

On the CPU side, the i7-14700F sits near several processors with similar average benchmark scores. The AMD Ryzen 9 7900X scores 0.6% higher, making it a near-identical performer for gaming workloads. The Intel Xeon 6505P is 0.2% lower, while the Intel Xeon Phi 7290 is 0.3% higher and the AMD EPYC 7313P is 0.8% higher. These deltas are within a narrow band, meaning any of these CPUs would produce nearly indistinguishable framerates in Rust when paired with the same GPU.

For the GPU, the NVIDIA GeForce RTX 2080 SUPER scores 1.1% higher in average benchmarks, making it the closest direct alternative. The Intel Arc A350M is 0.8% lower, the NVIDIA GeForce GTX 1630 is 0.7% higher, and the NVIDIA GeForce GTX 780 Ti is 0.8% higher. These margins are small enough that real-world Rust performance would be comparable, though architectural differences may influence specific scenes.

The GPU's percentile ranking of 70 puts it above the median of all tested GPUs, while the CPU's percentile of 91 places it in the top decile. This imbalance suggests the GPU is the limiting factor in most scenarios, particularly at higher resolutions.

How This Combo Ranks

The combination of the i7-14700F and RX 6600 XT ranks 2671st out of 3723 tested combos for Rust. This places the pairing in the lower third of the database, reflecting the GPU's mid-range positioning rather than the CPU's strong showing. The rank indicates that while the system is playable at 1080p and 1440p with adjusted settings, it trails a majority of tested configurations.

The CPU's high percentile (91) does not translate into a high combo rank, which underscores the GPU bottleneck. In Rust, the RX 6600 XT's 8 GB memory and 10.60 TFLOPS of FP32 compute become the deciding factors at higher resolutions. The combo's rank suggests that users seeking higher framerates would benefit more from a GPU upgrade than a CPU swap.

The Verdict

This PC can run Rust with playable framerates at 1920x1080 and 2560x1440, but not at 3840x2160. At 1080p, High settings deliver 78 FPS average, and Medium provides 92 FPS, both clearing the 60 FPS threshold. At 1440p, Medium settings average 64 FPS, making it the highest playable preset, while Low runs at 95 FPS. At 4K, no preset reaches 60 FPS, with the best result being Low at 56 FPS.

The verdict data confirms 1920x1080 with High settings (78 FPS) and 2560x1440 with Medium settings (64 FPS) as the optimal configurations. Users targeting 60 FPS should avoid Ultra at any resolution, as it only reaches 59 FPS at 1080p and falls to 41 FPS at 1440p.

CPU and GPU Roles

The performance scaling across resolutions reveals a clear GPU-bound pattern. At 1080p, the RX 6600 XT has enough headroom to push Low settings to 138 FPS, but the CPU's strong single-thread performance (4958 in Cinebench R23 single-core) prevents a bottleneck. Moving from 1080p to 1440p, the average FPS drops by roughly 30% across presets, indicating the GPU's rendering load is the primary constraint.

The CPU's role becomes more apparent at lower resolutions and settings. At 1080p Low, the system achieves 138 FPS, a figure that likely approaches the CPU's frame-delivery ceiling. The i7-14700F's 20 cores and 28 threads provide ample headroom for Rust's simulation and network code, but the game's graphical demands at higher presets shift the bottleneck firmly to the GPU.

At 1440p and 4K, the GPU's limitations dominate. The 4K Low result of 56 FPS versus 1440p Low at 95 FPS shows a 41% reduction, while the GPU's 256.0 GB/s memory bandwidth becomes a limiting factor. The CPU's benchmark scores, including 35122 in Cinebench R23 multi-core and 41317 in Passmark multi-thread, far exceed what Rust requires at these resolutions, confirming that the RX 6600 XT determines the playable settings envelope. For users prioritizing higher framerates, reducing resolution or settings is more effective than upgrading the CPU.