Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
138 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
96 FPS
Ultra 1440p Measured
38 FPS

4K (Ultra HD)

Low 4K Measured
57 FPS
Ultra 4K Measured
23 FPS
13.3ms Frame Time
20ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 46,881
Graphics Card
Required 28,194
Your GPU 16,361

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 23 31 35 57
1440p QHD 38 52 62 96
1080p Full HD 59 75 89 138

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 75
1920x1080 Low 138
1920x1080 Medium 89
1920x1080 Ultra 59
2560x1440 High 52
2560x1440 Low 96
2560x1440 Medium 62
2560x1440 Ultra 38
3840x2160 High 31
3840x2160 Low 57
3840x2160 Medium 35
3840x2160 Ultra 23

Performance Analysis: Rust on Your System

The Intel Core i7-13700K paired with the AMD Radeon RX 5700 XT delivers a playable Rust experience at 1080p and 1440p, but falls short of the 60 FPS threshold at 4K. The recorded data shows a clear pattern: lower resolutions and reduced presets unlock higher frame rates, while the most demanding settings at 2160p remain sub-60 FPS across the board.

Similar Performance Alternatives

The CPU sits in the 89th percentile among all tested processors, with an average benchmark score of 46881. Its nearest rivals in the database include the AMD Ryzen 9 5900, which scores 46971, a difference of only 0.2 percent. The AMD Ryzen AI 9 HX PRO 375 trails by 0.3 percent with a score of 47022. On the other side, the AMD Ryzen 9 7845HX and Intel Xeon w3-2535 both score 46654 and 46653 respectively, each coming in 0.5 percent behind the i7-13700K. These four alternatives would deliver nearly identical CPU-bound performance in Rust, meaning any of them paired with the same GPU would produce similar frame rates in scenarios where the processor is the limiting factor.

For the GPU, the RX 5700 XT holds the 59th percentile among all tested graphics cards, with an average benchmark score of 16361. Its nearest rivals are the AMD Radeon Pro 5600M at 16351 (0.1 percent behind), the NVIDIA RTX PRO 6000 Blackwell at 16408 (0.3 percent ahead), the AMD Radeon PRO W7500 at 16415 (0.3 percent ahead), and the NVIDIA GeForce RTX 5090 D V2 at 16504 (0.9 percent ahead). These deltas are small enough that in practice, swapping the RX 5700 XT for any of these alternatives would yield nearly indistinguishable frame rates in Rust, particularly at higher resolutions where GPU load dominates.

When considering the entire combo, the i7-13700K provides ample headroom over the RX 5700 XT in most gaming scenarios. The CPU's multi-threaded capabilities, evidenced by a Cinebench R23 multi-core score of 30745 and a Passmark multithread score of 45887, far exceed what Rust typically requires. The GPU, with a Passmark G3D score of 16277, becomes the primary constraint at 4K and high presets. Users with a CPU in the same performance band as the i7-13700K should expect the RX 5700 XT to be the deciding factor in most Rust configurations.

CPU and GPU Roles

The measured FPS data reveals how the balance shifts between CPU and GPU across resolutions and presets. At 1920x1080 with Low settings, the combo reaches 138.4 FPS average, which suggests the CPU is feeding the GPU efficiently and the graphics card is not saturated. Moving to 2560x1440 Low, the average drops to 95.8 FPS, a reduction of about 31 percent. At 3840x2160 Low, the average falls further to 56.9 FPS, another 41 percent drop. This scaling indicates that the GPU becomes progressively more dominant as resolution increases, which is typical for a title like Rust that has moderate CPU overhead but heavy pixel-pushing demands.

The preset scaling at each resolution further clarifies the roles. At 1080p, going from Low to Medium reduces the average from 138.4 to 89.3 FPS, a 35 percent decrease. Low to High drops to 74.6 FPS (46 percent lower than Low), and Low to Ultra lands at 59.4 FPS (57 percent lower). At 1440p, the same progression yields 95.8, 62, 51.6, and 38.2 FPS respectively. At 4K, Low produces 56.9 FPS, Medium 34.6, High 31.2, and Ultra 23.3. The consistent pattern across all three resolutions is that the GPU is the primary bottleneck when settings are raised, while the CPU maintains enough throughput to keep frame rates high at lower presets.

Rust's performance characteristics become clear when comparing the 1080p Low result of 138.4 FPS to the 1440p Low result of 95.8 FPS. If the CPU were the limiting factor, the resolution change would have minimal impact. The substantial drop confirms that the RX 5700 XT is the constraining component at higher pixel counts. Conversely, the relatively small gap between 1080p Ultra (59.4 FPS) and 1440p Ultra (38.2 FPS) compared to the Low preset gap suggests that at Ultra settings, the GPU is already near its limits even at 1080p, and the extra resolution pushes it further into diminishing returns.

How This Combo Ranks

Among all tested CPU and GPU combinations in the database, this pairing ranks 2752 out of 3723 for Rust. That places it in the lower half of all possible configurations, which aligns with the RX 5700 XT being a mid-range graphics card from an older generation. The i7-13700K is a high-end processor, but the GPU's age and performance class drag the overall combo ranking down.

The rank of 2752 out of 3723 means roughly 74 percent of tested combos deliver better Rust performance. However, this ranking does not tell the whole story, because many of those higher-ranked combos likely pair the same or similar CPUs with more powerful GPUs. The data shows that the CPU contributes positively to the combo's standing, while the GPU holds it back. For users who already own this combination, the frame rates at 1080p and 1440p with medium or lower presets are respectable, but the combo does not compete with modern high-end graphics cards in this title.

The Verdict

The verdict by resolution is clear. At 3840x2160, no settings preset reaches 60 FPS. The best available result is 56.9 FPS on Low, which falls short of the playable threshold. At 2560x1440, the combo achieves playable performance on Low (95.8 FPS) and Medium (62 FPS), with Medium being the best preset that stays at or above 60 FPS. At 1920x1080, the playable presets are Low (138.4 FPS), Medium (89.3 FPS), and High (74.6 FPS), with High being the best option that clears 60 FPS. Ultra at 1080p produces 59.4 FPS, just below the threshold.

This PC can run Rust at 1080p with High settings and maintain an average of 74.6 FPS, which is comfortably above 60 FPS. At 1440p, users must settle for Medium settings to stay above the threshold, achieving 62 FPS on average. At 4K, the system cannot maintain 60 FPS at any preset, so users targeting 4K would need to accept frame rates in the 23 to 57 range depending on settings, or lower the resolution.

Measured FPS Breakdown

At 1920x1080, the recorded averages are as follows. Low settings produce 138.4 FPS, Medium produces 89.3 FPS, High produces 74.6 FPS, and Ultra produces 59.4 FPS. The gap between Low and Medium is 49.1 FPS, while the gap between Medium and High is 14.7 FPS, and between High and Ultra is 15.2 FPS. The progression shows that each preset tier costs a significant portion of performance, with the largest single drop occurring when moving from Low to Medium.

At 2560x1440, the averages are 95.8 FPS on Low, 62 FPS on Medium, 51.6 FPS on High, and 38.2 FPS on Ultra. Here, the step from Low to Medium costs 33.8 FPS, from Medium to High costs 10.4 FPS, and from High to Ultra costs 13.4 FPS. The Medium preset is the only one that remains above 60 FPS, and it does so with a slim margin of 2 FPS.

At 3840x2160, the averages are 56.9 FPS on Low, 34.6 FPS on Medium, 31.2 FPS on High, and 23.3 FPS on Ultra. None of these reach the 60 FPS threshold. The drop from Low to Medium is 22.3 FPS, from Medium to High is 3.4 FPS, and from High to Ultra is 7.9 FPS. The diminishing returns between Medium and High at 4K indicate that the GPU is heavily saturated, and additional visual quality costs more proportionally than at lower resolutions.

The database does not record minimum or maximum FPS values for these measurements, so only the average frame rates are available for analysis. The averages provide a reliable basis for comparing presets and resolutions, but they do not capture frame time spikes or stutters that could affect the experience.

FAQ

Q: Can this PC run Rust at 1080p with High settings?

A: Yes. The recorded average FPS at 1920x1080 with High settings is 74.6, which is above the 60 FPS playable threshold.

Q: What is the best settings preset at 1440p that stays at or above 60 FPS?

A: The Medium preset at 2560x1440 produces an average of 62 FPS, making it the best choice that clears the 60 FPS threshold. Low also works at 95.8 FPS, but Medium offers higher visual quality while still staying above 60.

Q: Is 4K playable with this hardware?

A: No. At 3840x2160, the highest average FPS is 56.9 on Low settings, which is below the 60 FPS threshold. All other presets at 4K produce lower averages, with Ultra at 23.3 FPS.

Q: How does the CPU compare to similar processors?

A: The Intel Core i7-13700K has an average benchmark score of 46881, placing it in the 89th percentile. Its nearest rivals include the AMD Ryzen 9 5900 (46971, 0.2 percent higher) and the AMD Ryzen AI 9 HX PRO 375 (47022, 0.3 percent higher), with the AMD Ryzen 9 7845HX and Intel Xeon w3-2535 each about 0.5 percent lower.

Q: How does the GPU compare to similar graphics cards?

A: The AMD Radeon RX 5700 XT has an average benchmark score of 16361, placing it in the 59th percentile. Its nearest rivals are the AMD Radeon Pro 5600M (0.1 percent lower), NVIDIA RTX PRO 6000 Blackwell (0.3 percent higher), AMD Radeon PRO W7500 (0.3 percent higher), and NVIDIA GeForce RTX 5090 D V2 (0.9 percent higher).

Q: What is the best settings preset at 1080p that stays at or above 60 FPS?

A: The High preset at 1920x1080 produces an average of 74.6 FPS, which is the most demanding preset that clears the 60 FPS threshold. Ultra falls slightly short at 59.4 FPS.

Best Settings per Resolution

At 1920x1080, the best settings that maintain an average of at least 60 FPS are High, with a recorded average of 74.6 FPS. This preset provides the highest visual quality among the playable options, and the 14.6 FPS margin above the threshold offers some headroom for scene complexity. Low and Medium also exceed 60 FPS, but High is the recommended choice for users prioritizing image quality.

At 2560x1440, the best settings that stay at or above 60 FPS are Medium, with an average of 62 FPS. This is a narrow margin, only 2 FPS above the threshold, so users may experience occasional dips below 60 in demanding scenes. Low is also playable at 95.8 FPS, but Medium offers a meaningful visual upgrade. The data shows that High at 1440p drops to 51.6 FPS, which is below the threshold, so Medium is the ceiling.

At 3840x2160, no preset reaches 60 FPS, so there is no best setting that meets the playable threshold. The closest option is Low at 56.9 FPS, but it is still below 60. Users targeting 4K would need to accept lower frame rates or reduce the resolution to achieve smoother performance. The database does not record a best settings entry for 4K because none qualify.

The overall recommendation is to run Rust at 1080p High for the best balance of visual quality and performance, or at 1440p Medium if higher resolution is preferred. Both configurations maintain average FPS above 60, with 1080p providing a larger safety margin and 1440p offering more screen detail at the cost of a tighter performance buffer.