Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

34%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
142 FPS
Ultra 1080p Measured
104 FPS

1440p (2K / QHD)

Low 1440p Measured
125 FPS
Ultra 1440p Measured
78 FPS

4K (Ultra HD)

Low 4K Measured
105 FPS
Ultra 4K Measured
46 FPS
8.7ms Frame Time
13ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 2,254
Graphics Card
Required 28,194
Your GPU 19,410

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 60 72 105
1440p QHD 78 101 108 125
1080p Full HD 104 115 122 142

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 115
1920x1080 Low 142
1920x1080 Medium 122
1920x1080 Ultra 104
2560x1440 High 101
2560x1440 Low 125
2560x1440 Medium 108
2560x1440 Ultra 78
3840x2160 High 60
3840x2160 Low 105
3840x2160 Medium 72
3840x2160 Ultra 46

Performance Analysis: Rust on Your System

Measured FPS Breakdown

The recorded data for Rust with the Intel Core i5-9400 and AMD Radeon RX 7900 XTX shows a clear scaling pattern across resolutions and presets. At 1920x1080, the average frame rates are consistently high. Low settings produce an average of 142 FPS, Medium averages 122 FPS with a minimum of 104 FPS and a maximum of 140 FPS, High averages 115 FPS, and Ultra averages 104 FPS. The gap between Low and Ultra is 38 FPS, which indicates that the CPU and GPU combination has enough headroom at this resolution to absorb the extra load from higher presets without dropping below the playable threshold.

Moving to 2560x1440, the averages remain strong but show a modest decline. Low settings average 125 FPS, High averages 101 FPS, Medium averages 108 FPS with a minimum of 92 FPS and a maximum of 124 FPS, and Ultra averages 78 FPS. The step from 1080p to 1440p costs roughly 10 to 17 FPS depending on the preset, which is a moderate penalty. The Medium preset at 1440p has a recorded minimum of 92 FPS, so even the worst-case frame time stays well above 60 FPS.

At 3840x2160, the performance drops become more pronounced. Low settings average 105 FPS, Medium averages 72 FPS with a minimum of 61 FPS and a maximum of 82 FPS, High averages 60 FPS, and Ultra averages 46 FPS. The Ultra preset at 4K falls below the 60 FPS playable threshold, while High sits exactly at 60 FPS on average. The Medium preset shows a minimum of 61 FPS, meaning that even the lowest recorded frame rate at Medium 4K clears the playable line, but just barely.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of exactly 60 FPS. Medium is also playable and averages 72 FPS, but High is the highest quality option that still meets the threshold. Ultra at 4K averages 46 FPS, so it is not recommended for smooth gameplay.

At 2560x1440, the best settings are Ultra. The average at Ultra is 78 FPS, which clears the 60 FPS line by a comfortable margin. Every preset at 1440p, from Low to Ultra, is playable, but Ultra is the maximum quality option that still maintains a fluid experience.

At 1920x1080, the best settings are also Ultra, with an average of 104 FPS. This is the highest preset available, and it runs well above the 60 FPS threshold. The data shows no need to compromise on quality at 1080p, as even the heaviest settings deliver a strong average frame rate.

FAQ

Q: Can this PC run Rust at 60 FPS on Ultra settings at 1920x1080?

A: Yes. The recorded average FPS at 1080p Ultra is 104, which is well above the 60 FPS playable threshold.

Q: What is the highest quality preset that stays at or above 60 FPS at 3840x2160?

A: High is the most demanding preset that clears the threshold, with an average of 60 FPS. Medium also works and averages 72 FPS, but Ultra does not, averaging only 46 FPS.

Q: How does the Medium preset perform at 2560x1440 in terms of minimum frame rate?

A: The Medium preset at 1440p has a minimum of 92 FPS and a maximum of 124 FPS, with an average of 108 FPS. The minimum frame rate stays comfortably above the 60 FPS playable line.

Q: Is the Ultra preset playable at 2560x1440?

A: Yes. Ultra at 1440p averages 78 FPS, which is above the 60 FPS threshold, making it a viable option for high-refresh monitors.

Q: What is the difference in average FPS between Low and Ultra settings at 1920x1080?

A: Low averages 142 FPS, while Ultra averages 104 FPS. The difference is 38 FPS, with both presets remaining far above the playable threshold.

Q: Does the 4K Ultra preset fall below the playable threshold?

A: Yes. At 3840x2160 with Ultra settings, the average FPS is 46, which is below the 60 FPS playable threshold. High is the highest preset that meets the requirement.

Similar Performance Alternatives

The CPU and GPU in this system have nearest rivals according to the database, and those alternatives would behave similarly in Rust. For the Intel Core i5-9400, the closest matches by average benchmark score include the Intel Core i7-1068NG7, which scores 2259 against 2254 for the i5-9400, a delta of negative 0.2 percent. The Intel Core i7-10710U scores 2248, a delta of 0.3 percent. The AMD Ryzen 5 PRO 1500 scores 2246, a delta of 0.4 percent. The Intel Core i3-10305 scores 2264, a delta of negative 0.4 percent. All four rivals sit within a fraction of a percent of the i5-9400, meaning that swapping to any of them would produce nearly identical frame rates in Rust, assuming the GPU remains the same.

For the AMD Radeon RX 7900 XTX, the nearest rivals by average benchmark score are the NVIDIA GeForce GTX 1060 3 GB with a score of 19334 against 19410 for the RX 7900 XTX, a delta of 0.4 percent. The NVIDIA Quadro K5200 scores 19602, a delta of negative 1 percent. The AMD FirePro D300 scores 19637, a delta of negative 1.2 percent. The NVIDIA TITAN Xp scores 19177, a delta of 1.2 percent. These benchmarks are based on synthetic workloads, not directly on Rust, but the score proximity suggests that any of these GPUs would land in a similar performance band. In practice, the RX 7900 XTX has a much higher percentile ranking among all GPUs at 64, while the i5-9400 sits at the 47th percentile among all CPUs, so the GPU is the dominant component in this pairing.

CPU and GPU Roles

The relative importance of the CPU and GPU in Rust can be inferred from how frame rates scale across resolutions and presets. At 1920x1080, the GPU has the least amount of work to do, and the averages range from 104 FPS at Ultra to 142 FPS at Low. The CPU is more likely to be the limiting factor at this resolution, but the i5-9400 still delivers enough throughput to keep every preset above 100 FPS. The small spread between presets, 38 FPS from Low to Ultra, suggests that the GPU is not being pushed hard enough to expose its full potential.

At 2560x1440, the GPU begins to take on a heavier load. The averages range from 78 FPS at Ultra to 125 FPS at Low, a spread of 47 FPS. The drop from 1080p to 1440p is consistent across presets, roughly 10 to 17 FPS, which indicates that the GPU is now the primary driver of performance. The CPU still has enough headroom to feed the GPU, as even the Ultra preset at 1440p stays above 75 FPS.

At 3840x2160, the GPU is clearly the dominant component. The averages range from 46 FPS at Ultra to 105 FPS at Low, a spread of 59 FPS. The Ultra preset at 4K drops below the 60 FPS threshold, while High sits exactly at 60 FPS)SkipMedium averages 72 FPS with a minimum of 61. The scaling from 1440p to 4K is steep, particularly at Ultra where the average falls from 78 to 46 FPS, a drop of 32 FPS. This pattern confirms that the RX 7900 XTX is the performance bottleneck at high resolutions, while the i5-9400 remains sufficient for the game's CPU demands.

The CPU's benchmark scores support this interpretation. The i5-9400 has a multicore score of 6629 in Cinebench R23 and a single-core score of 935, placing it in the 47th percentile of all CPUs. These are modest figures, but Rust's frame rates do not collapse at lower resolutions, which means the game is not heavily CPU-bound with this processor. The GPU, on the other hand, has a Passmark G3D score of 31238 and sits in the 64th percentile of all GPUs, making it the stronger component by a wide margin.

The Verdict

This PC can run Rust, and the database confirms that it clears the 60 FPS playable threshold in most configurations. At 1920x1080, every preset from Low to Ultra is playable, with Ultra averaging 104 FPS)Skipand Low averaging 142 FPS. At 2560x1440, every preset is also playable, with Ultra averaging 78 FPS,Skipand Low averaging 125 FPS. At 3840x2160, the situation is more restrictive: High, Low, and Medium are playable, while Ultra is not. High averages exactly 60 FPS, Medium averages 72 FPS, and Low averages 105 FPS. The Ultra preset at 4K averages 46 FPS, which falls short of the playable threshold.

For practical use, the best experience is at 1440p with Ultra settings, where the average of 78 FPS provides a smooth and visually rich experience. At 1080p, Ultra is even smoother at 104 FPS, making it ideal for high-refresh-rate monitors. At 4K, sticking to High is the maximum quality option that still meets the 60 FPS standard, while Medium offers a small safety margin with a minimum of 61 FPS. The data shows a clear recommendation: this system is well suited for 1080p and 1440p gaming in Rust, and it can handle 4K with adjusted settings. The GPU is the limiting factor at 4K Ultra, but the overall combination is more than capable for the vast majority of playable configurations.