Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
250 FPS
Ultra 1080p Measured
117 FPS

1440p (2K / QHD)

Low 1440p Measured
187 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
110 FPS
Ultra 4K Measured
47 FPS
6.5ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 49,394
Graphics Card
Required 28,194
Your GPU 49,957

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 47 62 74 110
1440p QHD 80 106 125 187
1080p Full HD 117 154 182 250

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 154
1920x1080 Low 250
1920x1080 Medium 182
1920x1080 Ultra 117
2560x1440 High 106
2560x1440 Low 187
2560x1440 Medium 125
2560x1440 Ultra 80
3840x2160 High 62
3840x2160 Low 110
3840x2160 Medium 74
3840x2160 Ultra 47

Performance Analysis: Rust on Your System

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 5070 Ti is a high-end desktop combination. In Rust, this pairing produces measured frame rates that vary significantly by resolution and preset. The combo ranks 312th out of 3,723 tested configurations, placing it in the top 8.4% of all systems evaluated. The following analysis breaks down the measured FPS data, compares the components to their nearest rivals, and provides guidance on optimal settings.

Measured FPS Breakdown

The measured FPS data covers three resolutions (3840x2160, 2560x1440, 1920x1080) and four quality presets (Low, Medium, High, Ultra). The table below lists the exact average, minimum, and maximum frame rates for each combination. Where a value is not reported, it is marked as "—".

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 62 | — | — |

| 3840x2160 | Low | 110 | — | — |

| 3840x2160 | Medium | 74 | 63 | 85 |

| 3840x2160 | Ultra | 47 | — | — |

| 2560x1440 | High | 106 | — | — |

| 2560x1440 | Low | 187 | — | — |

| 2560x1440 | Medium | 125 | 106 | 144 |

| 2560x1440 | Ultra | 80 | — | — |

| 1920x1080 | High | 154 | — | — |

| 1920x1080 | Low | 250 | — | — |

| 1920x1080 | Medium | 182 | 155 | 209 |

| 1920x1080 | Ultra | 117 | — | — |

At 4K, the system delivers 62 FPS on High, 110 on Low, and 74 on Medium, but drops to 47 FPS on Ultra — the only preset that fails to reach the 60 FPS playable threshold. The Medium preset shows a minimum of 63 FPS, indicating that even the lowest frame in that run stays above the threshold. At 1440p, all four presets exceed 60 FPS, with Ultra averaging 80 FPS and Low reaching 187 FPS. The Medium preset at 1440p has a minimum of 106 FPS and a maximum of 144 FPS, showing a tight frame-time distribution. At 1080p, the system is exceptionally fast: Low averages 250 FPS, Medium 182 FPS, High 154 FPS, and Ultra 117 FPS. The Medium preset at 1080p reports a minimum of 155 FPS and a maximum of 209 FPS, confirming consistent high performance.

FAQ

Q: What is the best settings preset for 4K resolution?

A: The most demanding preset that stays at or above 60 FPS is High, with an average of 62 FPS. Low and Medium also exceed 60 FPS, but Ultra does not (47 FPS).

Q: Can this combo run Rust at 1080p with Ultra settings?

A: Yes. The measured average FPS at 1920x1080 Ultra is 117, well above the 60 FPS playable threshold.

Q: How does the Intel Core i5-14600KF compare to the AMD Ryzen 9 7900?

A: The i5-14600KF has an average benchmark score of 49,394, which is 0.3% higher than the Ryzen 9 7900's 49,228. The two CPUs are effectively tied in synthetic performance.

Q: What is the memory bandwidth of the NVIDIA GeForce RTX 5070 Ti?

A: The GPU features 16 GB of GDDR7 memory on a 256-bit bus, providing a bandwidth of 896.0 GB/s.

Q: What is the combo's rank among all tested systems in Rust?

A: The combination ranks 312th out of 3,723 tested CPU-GPU pairs, placing it in the top 8.4% of all configurations.

Q: What is the launch MSRP of the CPU?

A: The Intel Core i5-14600KF has a launch MSRP of $294.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU, based on average benchmark scores, provide a sense of what other hardware would behave similarly in synthetic workloads. For the Intel Core i5-14600KF, the closest alternatives are the AMD Ryzen 9 7900 (average score 49,228, 0.3% lower), the AMD Ryzen 7 PRO 5755G (49,196, 0.4% lower), the Intel Core Ultra 5 245 (48,995, 0.8% lower), and the AMD Ryzen AI Max+ 388 (49,796, 0.8% higher). These deltas are all within 1%, meaning that swapping the i5-14600KF for any of these CPUs would yield nearly identical CPU-bound performance in most applications.

For the NVIDIA GeForce RTX 5070 Ti, the nearest rivals are the AMD Radeon RX Vega 64 (average score 50,001, 0.1% higher), the Intel Arc A550M (49,737, 0.4% lower), the AMD Radeon RX 6900 XT (50,951, 2.0% higher), and the AMD Radeon RX 6800 XT (48,477, 3.1% lower). The RTX 5070 Ti sits between the RX 6800 XT and the RX 6900 XT in raw compute, with the RX Vega 64 being essentially a tie. In game-specific scenarios, the RTX 5070 Ti's newer architecture may offer different behavior, but the synthetic scores indicate that these GPUs are close enough to be considered comparable in overall throughput.

How This Combo Ranks

In Rust, the Intel Core i5-14600KF + NVIDIA GeForce RTX 5070 Ti combination ranks 312th out of 3,723 tested configurations. This places it in the top 8.4% of all systems evaluated, a strong result that reflects the high performance of both components. The rank is derived from measured FPS data across the tested resolutions and presets, not from synthetic benchmarks. The system comfortably exceeds the 60 FPS playable threshold at 1080p and 1440p with all presets, and at 4K with High, Medium, or Low settings. Only the 4K Ultra preset falls below 60 FPS, which is a demanding workload that even this high-end pairing cannot sustain. The overall rank indicates that this combo is well-suited for Rust, outperforming the vast majority of tested systems.

The Verdict

The data shows that this PC can run Rust with high frame rates at most settings. At 3840x2160, the playable presets are High (62 FPS), Low (110 FPS), and Medium (74 FPS); Ultra is not playable because it averages 47 FPS. At 2560x1440, all four presets — Low (187 FPS), Medium (125 FPS), High (106 FPS), and Ultra (80 FPS) — clear the 60 FPS threshold. At 1920x1080, every preset also exceeds 60 FPS, with Ultra averaging 117 FPS. Therefore, the system is fully capable of running Rust at 60+ FPS at 1080p and 1440p with maximum settings, and at 4K with High settings or lower. The only scenario that fails to meet the playable threshold is 4K Ultra, which is an extreme configuration.

Best Settings per Resolution

The most demanding preset that stays at or above 60 FPS at each resolution is as follows:

  • 3840x2160: High — average 62 FPS. (Low and Medium also work, but High is the highest preset that remains playable.)
  • 2560x1440: Ultra — average 80 FPS. (All presets are playable, and Ultra is the most demanding.)
  • 1920x1080: Ultra — average 117 FPS. (All presets are playable, and Ultra is the most demanding.)

These settings provide the best visual quality while maintaining a frame rate above the 60 FPS playable threshold.

CPU and GPU Roles

The FPS scaling across resolutions and presets reveals which component is the primary bottleneck. At Ultra settings, the average FPS drops from 117 at 1080p to 80 at 1440p (a 31.6% reduction) and then to 47 at 4K (a 41.3% reduction from 1440p). This steep decline is characteristic of GPU-bound rendering, where pixel throughput and memory bandwidth become limiting factors. The RTX 5070 Ti's 16 GB GDDR7 memory and 896.0 GB/s bandwidth are substantial, but the 4K Ultra workload exceeds its capacity to maintain 60 FPS.

At 1080p Low, the system reaches 250 FPS, indicating that the CPU is not a limiting factor at lower resolutions. The i5-14600KF's high single-thread performance (Cinebench R23 single-core score of 4,594) and 14 cores / 20 threads provide ample headroom for Rust's simulation and physics. The relative drop from Low to Ultra is similar across resolutions: at 1080p, Low 250 to Ultra 117 is a 53% reduction; at 1440p, 187 to 80 is a 57% reduction; at 4K, 110 to 47 is a 57% reduction. This consistency suggests that the GPU's performance scaling with settings is independent of resolution, reinforcing the conclusion that the GPU is the dominant factor in both settings and resolution changes.

The CPU's role becomes more apparent at lower resolutions and lower presets, where the frame rates are extremely high. At 1080p Low, the 250 FPS average is likely near the CPU's maximum output for Rust's game logic, but the GPU is still able to keep up. As resolution increases, the GPU workload grows, and the CPU's influence diminishes. The data indicates that for this game, the RTX 5070 Ti is the primary determinant of frame rate at 1440p and 4K, while the i5-14600KF provides sufficient headroom to avoid becoming a bottleneck at any tested setting.