Rust

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5070 delivers a wide range of performance in Rust, scaling from a demanding 43 FPS at 4K Ultra to a fluid 263 FPS at 1080p Low. The measured data shows this combination is highly capable, with the 14400F’s 16 threads and the RTX 5070’s 12 GB of GDDR7 memory providing enough headroom for high-refresh-rate play at mainstream resolutions, while 4K requires a more conservative preset choice to stay above the 60 FPS playable threshold.

Measured FPS Breakdown

At 1920x1080, the combination produces exceptional frame rates across all presets. The Low preset hits an average of 263 FPS, which is the highest recorded figure in the entire dataset. Moving to Medium, the average drops to 224 FPS, with a minimum of 191 FPS and a maximum of 258 FPS, indicating consistent frame pacing even during busy scenes. The High preset still delivers a very strong 172 FPS average, while Ultra remains comfortably above the 60 FPS threshold at 129 FPS. None of the 1080p measurements include min or max values for Low, High, or Ultra, but the Medium preset’s 191 FPS minimum shows that even the lowest dips stay far above playable levels.

Stepping up to 2560x1440, the performance remains robust but shows a predictable decline as resolution increases. The Low preset averages 173 FPS, which is still a high-refresh-rate experience. Medium follows at 142 FPS, with a minimum of 121 FPS and a maximum of 163 FPS, demonstrating tight frame delivery. High averages 109 FPS, and Ultra drops to 82 FPS, which is still well above the 60 FPS playable mark. The gap between Low and Ultra at 1440p is 91 FPS, showing that the preset choice has a substantial impact on performance, but even the most demanding setting leaves ample headroom.

At 3840x2160, the picture changes significantly. The Low preset averages 91 FPS, which is the only 4K setting that clears the 100 FPS mark. Medium averages 74 FPS, with a minimum of 63 FPS and a maximum of 86 FPS, meaning the lowest recorded frame rate barely stays above the 60 FPS threshold. High drops to 57 FPS, which is below the playable threshold, and Ultra falls further to 43 FPS. The data shows that 4K Ultra and High are not viable for smooth gameplay with this hardware, while Low and Medium provide acceptable performance, with Medium being the best balance of visual quality and frame rate.

The scaling from 1080p to 1440p is steep: Ultra drops from 129 FPS to 82 FPS, a 47 FPS reduction, while Low falls from 263 FPS to 173 FPS, a 90 FPS reduction. The scaling from 1440p to 4K is even more pronounced, with Ultra falling from 82 FPS to 43 FPS and Medium from 142 FPS to 74 FPS. These numbers indicate that the RTX 5070’s 192-bit memory bus and 672.0 GB/s bandwidth are pushed hard at higher resolutions, while the CPU becomes less of a factor as pixel count increases.

CPU and GPU Roles

The benchmark results indicate a clear shift in component responsibility as resolution changes. At 1920x1080, the Intel Core i5-14400F, with its 10 cores and 16 threads, plays a more prominent role in keeping frame rates high. The 263 FPS Low preset result suggests that the CPU is capable of feeding the GPU at very high rates, as the RTX 5070’s 30.87 TFLOPS FP32 compute is unlikely to be the limiting factor at such low graphical loads. The 14400F’s 4.70 GHz boost clock and 20 MB of shared L3 cache contribute to strong single-thread performance, which Rust’s simulation and entity update logic often requires.

As resolution increases to 2560x1440, the GPU begins to take on more of the workload. The RTX 5070’s 6144 shading units and 80 ROPs are tasked with rendering more pixels, and the frame rate drop from 263 FPS to 173 FPS at Low settings reflects this shift. The CPU still provides enough headroom to keep the GPU fed, as the 82 FPS Ultra result at 1440p shows that the graphics card is the primary bottleneck at this resolution and preset.

At 3840x2160, the GPU is clearly the dominant component. The 4K results show a dramatic reduction in performance compared to 1440p, with Ultra falling from 82 FPS to 43 FPS, a 48% reduction. The RTX 5070’s 12 GB memory capacity is sufficient for Rust’s textures at 4K, but the 192-bit bus width and 672.0 GB/s bandwidth appear to be the constraining factors, as the GPU’s pixel rate of 201.0 GPixel/s is likely saturated at this resolution. The CPU’s role is diminished at 4K, as the gap between Low and Ultra at 4K is 48 FPS, compared to a 91 FPS gap at 1440p, indicating that the GPU’s rendering limits are the primary driver of the performance spread.

The data suggests that for 1080p and 1440p gaming, the i5-14400F and RTX 5070 are well balanced, with the CPU providing enough throughput for high frame rates and the GPU handling the visual load. At 4K, the GPU becomes the sole focus, and users should expect to lower presets to achieve playable performance.

How This Combo Ranks

The Intel Core i5-14400F + NVIDIA GeForce RTX 5070 combination ranks 232nd out of 3723 tested combos in Rust, placing it in the top 6.2% of all configurations in the database. This is a strong showing, indicating that the pair is well-suited for the game’s demands. The CPU’s percentileVsAllCpus of 83 and the GPU’s percentileVsAllGpus of 82 both point to hardware that sits above the majority of other components, and the combination’s rank reflects that synergy.

In terms of the CPU’s nearest rivals, the i5-14400F’s average benchmark score of 32279 is within a fraction of the AMD Ryzen 7 PRO 8840U, which scores 32233 with a deltaPct of 0.1, and the Intel Core i9-11900, which scores 32226 with a deltaPct of 0.2. The AMD Ryzen 7 6800HS scores 32354, which is 0.2% higher, and the Intel Core i7-12800H scores 32121, which is 0.5% lower. These differences are negligible, meaning the 14400F’s performance is effectively on par with these alternatives in synthetic benchmarks, but its combination with the RTX 5070 in Rust is what matters most.

For the GPU, the RTX 5070’s average benchmark score of 40377 is closely matched by the AMD Radeon Pro 580 at 40318 (deltaPct 0.1) and the AMD Radeon Pro WX 7100 at 40063 (deltaPct 0.8). The AMD Radeon Pro 5300 scores 40870, which is 1.2% higher, and the NVIDIA RTX A500 Mobile scores 39568, which is 2% lower. These rivals are workstation-class products, so the RTX 5070’s gaming performance in Rust is not directly comparable, but the rank of 232 out of 3723 confirms that this combo outperforms the vast majority of tested systems.

The rank also implies that this combination is better suited to Rust than many other popular pairings, likely due to the CPU’s strong multi-core performance (21645 in Cinebench R23 multi-core) and the GPU’s modern architecture. Users with this setup are in a favorable position relative to the broader hardware ecosystem.

FAQ

Q: Can this PC run Rust at 4K with playable frame rates?

A: Yes, but only at Low or Medium settings. The data shows 4K Low averages 91 FPS, and 4K Medium averages 74 FPS with a minimum of 63 FPS. High drops to 57 FPS and Ultra to 43 FPS, both below the 60 FPS playable threshold.

Q: What is the best preset for 1440p gaming?

A: The Ultra preset is the best choice, as it delivers an average of 82 FPS, which is well above the 60 FPS threshold. All four presets (Low, Medium, High, Ultra) are playable at 1440p, with Low hitting 173 FPS and Medium at 142 FPS.

Q: How does the RTX 5070’s memory configuration affect performance?

A: The GPU has 12 GB of GDDR7 memory on a 192-bit bus with 672.0 GB/s bandwidth. The measured FPS scaling suggests this bandwidth is sufficient for 1080p and 1440p, but at 4K, the performance drop from 1440p (e.g., Ultra from 82 FPS to 43 FPS) indicates the memory subsystem is a limiting factor.

Q: Is the i5-14400F a bottleneck for the RTX 5070?

A: At 1080p, the CPU’s role is significant, with Low hitting 263 FPS, suggesting it can keep up with the GPU. At 1440p and 4K, the GPU becomes the primary bottleneck, as frame rates scale down with resolution. The CPU’s 16 threads and 4.70 GHz boost clock appear sufficient for this game.

Q: What frame rates can I expect at 1080p Ultra?

A: The Ultra preset at 1920x1080 averages 129 FPS. This is the most demanding preset, but it still provides a smooth experience well above the 60 FPS threshold.

Q: How does this combo compare to other tested systems?

A: It ranks 232nd out of 3723 tested combos, placing it in the top 6.2% of configurations. The CPU and GPU both sit in the 82nd percentile or higher relative to all other components, indicating a strong overall pairing.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the most demanding option that stays at or above 60 FPS, delivering an average of 129 FPS. This is the highest visual quality available, and the frame rate remains far above the playable threshold, making it the recommended choice for 1080p users.

At 2560x1440, the Ultra preset also achieves playable performance, with an average of 82 FPS. This is the best balance of quality and speed at this resolution, as the 82 FPS average provides a smooth experience without needing to compromise on settings.

At 3840x2160, the Medium preset is the most demanding option that stays at or above 60 FPS, averaging 74 FPS. The minimum of 63 FPS ensures that even the lowest dips remain playable, while the Low preset offers a higher average of 91 FPS but with reduced visual fidelity. High and Ultra are not playable at 4K with this hardware.

The Verdict

This PC can run Rust effectively, but the experience depends heavily on resolution. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS playable threshold, with Ultra delivering 129 FPS. This is a fully playable setup for high-refresh-rate monitors.

At 2560x1440, the same is true: every preset is playable, with Ultra reaching 82 FPS. This resolution offers the best balance of visual quality and performance, as even the most demanding settings remain well above the 60 FPS mark.

At 3840x2160, the verdict is more qualified. Only Low and Medium presets are playable, with Medium providing 74 FPS and Low at 91 FPS. High and Ultra fall below the 60 FPS threshold, so users at 4K must accept Medium settings to maintain smooth gameplay. Overall, the i5-14400F + RTX 5070 combination is a strong performer for Rust, offering high frame rates at mainstream resolutions and viable 4K play with adjusted settings.