Rust

Rust on an Intel Core i5-14400F paired with an NVIDIA GeForce RTX 5060 is a combination that lands comfortably in playable territory at 1080p and 1440p, while 4K demands significant setting reductions. The measured data shows this pairing ranks 1685 out of 3723 tested combos in Rust, sitting just above the midpoint of all configurations benchmarked for the game. Rust, released in 2018 as a survival title, rewards a balance of single-threaded CPU speed and consistent GPU throughput, and this pairing delivers both: the i5-14400F sits in the 83rd percentile of all CPUs with a PassMark single-thread score of 3701, while the RTX 5060 holds the 72nd percentile of all GPUs with a PassMark G3D score of 20891.

FAQ

Q: Can the i5-14400F + RTX 5060 run Rust at 60 FPS? A: Yes at 1080p and 1440p. At 1920x1080, every preset from Low through Ultra clears the threshold, topping out at 72.9 FPS average on Ultra. At 2560x1440, Low, Medium, and High presets clear it, with High delivering 65.2 FPS average. At 3840x2160, only the Low preset reaches the threshold at 69.4 FPS average.

Q: What is the highest setting the combo can use at 1080p? A: Ultra, at 72.9 FPS average — the only resolution where the maximum preset stays above the 60 FPS playable threshold.

Q: How much performance is lost going from Low to Ultra? A: At 1080p, frame rates drop from 173.5 FPS on Low to 72.9 FPS on Ultra. At 1440p the span is 121.5 to 52.4 FPS, and at 4K it is 69.4 to 30.1 FPS.

Q: Where does this combo rank among tested Rust configurations? A: Rank 1685 of 3723 combos — slightly better than the median tested pairing for this game.

Q: How strong is the CPU in this pairing? A: The i5-14400F is a 10-core, 16-thread Raptor Lake-R processor with a 4.70 GHz boost clock, a PassMark single-thread score of 3701, and an 83rd percentile standing against all CPUs in the database.

Q: Is 8 GB of VRAM enough for Rust at 4K? A: The data indicates 4K is the limiting regime: only Low settings clear 60 FPS at 69.4 FPS average, with Medium at 49.2 and High at 41.7 FPS average, so the 8 GB GDDR7 buffer is pushed hardest at that resolution.

CPU and GPU Roles

The resolution scaling data makes the GPU the dominant component at every step up in pixel count. Moving from 1920x1080 to 2560x1440 on Ultra cuts the average from 72.9 to 52.4 FPS; extending to 3840x2160 drops it further to 30.1 FPS. That pattern — a near-halving of frame rate as pixel count roughly quadruples from 1080p to 4K — is the signature of GPU-bound behavior. The RTX 5060, with its 128-bit bus, 448.0 GB/s of GDDR7 bandwidth, and 19.18 TFLOPS of FP32 throughput, is the component whose limits define the upper presets at higher resolutions.

The CPU's role shows at the low end of the settings ladder. At 1080p Low, the pairing reaches 173.5 FPS average — a regime where the i5-14400F's single-thread performance becomes the constraint rather than the GPU. Its PassMark single-thread score of 3701 and Geekbench single-core score of 2058 indicate strong per-core throughput for a 65 W desktop part, and Rust's survival-simulation workload benefits from that. In practical terms: at 1080p Medium and above the GPU is the deciding factor, at 1440p it is almost entirely GPU-bound, and only in the high-refresh Low-preset scenario does the CPU ceiling come into play.

Measured FPS Breakdown

At 1920x1080, the data shows a smooth ladder across presets: Low averages 173.5 FPS, Medium 115.1, High 97.6, and Ultra 72.9. Every preset sits above the 60 FPS threshold, and even the Ultra result carries roughly a 13 FPS margin. The step from High to Ultra costs about 25 FPS, the largest single-preset drop at this resolution.

At 2560x1440, Low averages 121.5 FPS, Medium 82.6, High 65.2, and Ultra 52.4. Three of four presets clear 60 FPS, but Ultra falls roughly 8 FPS short — enough to notice in a survival game where frame consistency matters during combat. The High preset's 65.2 FPS average is the practical ceiling for a 60 FPS target.

At 3840x2160, Low averages 69.4 FPS, Medium 49.2, High 41.7, and Ultra 30.1. Only Low clears the threshold, and the Ultra result of 30.1 FPS is less than half the Low figure, indicating the GPU's 8 GB framebuffer and 128-bit bus are saturated at this pixel count with demanding settings. Minimum and maximum frame rates were not captured in this dataset; the averages alone, however, establish the preset boundaries clearly.

The Verdict

Yes — this PC runs Rust, with the qualification depending entirely on resolution. At 1920x1080, the verdict is unambiguous: all four presets are playable, and even Ultra exceeds the 60 FPS threshold at 72.9 FPS average. At 2560x1440, the verdict is positive with one exception: Low, Medium, and High are playable (121.5, 82.6, and 65.2 FPS respectively), while Ultra at 52.4 FPS falls short. At 3840x2160, the verdict narrows to Low settings only, at 69.4 FPS average — playable, but with no headroom for a higher preset, since Medium drops to 49.2 FPS. The overall ranking of 1685 out of 3723 combos places this pairing slightly above the median for Rust, consistent with a mid-range build that handles the game well at mainstream resolutions.

Best Settings per Resolution

• 1920x1080 — Ultra, 72.9 FPS average. The most demanding preset still clears 60 FPS with room to spare; no compromise is needed at this resolution.
• 2560x1440 — High, 65.2 FPS average. Ultra drops below the threshold at 52.4 FPS, making High the most demanding playable preset. Medium at 82.6 FPS is the safer pick if extra margin is wanted.
• 3840x2160 — Low, 69.4 FPS average. The only preset above 60 FPS. Medium at 49.2 FPS and High at 41.7 FPS both fall short, so 4K requires the lowest preset to stay playable.

How This Combo Ranks

Against the full field of 3723 tested CPU/GPU combinations in Rust, the i5-14400F + RTX 5060 pairing ranks 1685 — just past the midpoint. That placement aligns with the component-level percentiles: the CPU sits in the 83rd percentile of all CPUs (average benchmark score 32279), while the GPU occupies the 72nd percentile of all GPUs (average benchmark score 26331). The combo's rank in Rust being lower than either component's standalone percentile reflects the game's sensitivity to configurations with stronger GPUs or higher-refresh CPU pairings above it in the table. For context within this game's dataset, the pairing outperforms slightly more than half of all tested configurations, which is consistent with its measured results: dominant at 1080p, adequate at 1440p, and constrained at 4K.

Similar Performance Alternatives

On the CPU side, the nearest rivals cluster within a fraction of a percent of the i5-14400F's average score of 32279. The AMD Ryzen 7 PRO 8840U (32233, 0.1% behind), Intel Core i9-11900 (32226, 0.2% behind), and AMD Ryzen 7 6800HS (32354, 0.2% ahead) are statistically equivalent in aggregate performance, while the Intel Core i7-12800H trails by 0.5%. Any of these processors would produce broadly similar CPU-side behavior in Rust, though the 14400F's strong single-thread results — PassMark single-thread of 3701 and Geekbench single-core of 2058 — remain the relevant figures for this game's workload.

On the GPU side, the RTX 5060's average score of 26331 is bracketed by close rivals: the AMD Radeon 860M (26401) and NVIDIA GeForce MX550 (26421) sit 0.3% ahead, the AMD Radeon RX 5700 XT 50th Anniversary (26553) leads by 0.8%, and the AMD Radeon RX 6750 XT (26011) trails by 1.2%. The RX 6750 XT in particular would be expected to deliver Rust frame rates within about a percent of the RTX 5060's measured results at every resolution and preset, making it the most direct discrete-card alternative. A system built around any of these GPUs paired with the i5-14400F or one of its CPU rivals would reproduce this page's performance profile — 60 FPS-capable at 1080p Ultra and 1440p High, and limited to Low settings at 4K.