Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
136 FPS
Ultra 1080p Measured
58 FPS

1440p (2K / QHD)

Low 1440p Measured
96 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
26 FPS
12.7ms Frame Time
19ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 27,799
Graphics Card
Required 28,194
Your GPU 24,442

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 32 39 53
1440p QHD 43 56 65 96
1080p Full HD 58 79 92 136

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 79
1920x1080 Low 136
1920x1080 Medium 92
1920x1080 Ultra 58
2560x1440 High 56
2560x1440 Low 96
2560x1440 Medium 65
2560x1440 Ultra 43
3840x2160 High 32
3840x2160 Low 53
3840x2160 Medium 39
3840x2160 Ultra 26

Performance Analysis: Rust on Your System

The Intel Core i5-12600KF paired with the AMD Radeon RX 6600 XT delivers a playable Rust experience at 1080p and 1440p, but fails to hit the 60 FPS threshold at 4K in any tested preset. The data shows a clear scaling pattern where lower resolutions and reduced settings yield progressively higher frame rates, with the combo's strongest performance at 1080p Low settings reaching an average of 136.3 FPS. This analysis breaks down the measured performance across all resolution and settings combinations, contextualizes the results against similar hardware, and provides a definitive verdict on which configurations clear the 60 FPS playability bar.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, which produces an average of 79 FPS. This leaves headroom above the playable threshold, but Ultra at this resolution drops to 57.5 FPS, just below the 60 FPS mark. The data indicates that High is the optimal choice for visual fidelity while maintaining comfortable performance at 1080p.

At 2560x1440, the best playable setting is Medium, averaging 64.5 FPS. Low runs faster at 96.3 FPS, but Medium offers better visual quality while still clearing the 60 FPS requirement. High at 1440p falls short at 56.2 FPS, and Ultra is significantly lower at 42.7 FPS.

At 3840x2160, no preset achieves 60 FPS. The closest is Low at 53.4 FPS, followed by Medium at 39 FPS, High at 32 FPS, and Ultra at 26.4 FPS. The verdict data confirms that 4K is not playable with this combination, as the playableSettings list is empty for this resolution.

CPU and GPU Roles

The performance scaling across resolutions reveals how the balance shifts between the Intel Core i5-12600KF and the AMD Radeon RX 6600 XT. At 1080p, the GPU is less stressed, allowing the CPU's strengths to emerge. The jump from Low to Medium at 1080p reduces average FPS from 136.3 to 92.4, a drop of 43.9 FPS, while moving from Medium to High costs another 13.4 FPS. This suggests that at lower resolutions, the GPU is the primary limiter as settings increase, since the CPU has ample headroom with its 10 cores and 16 threads.

At 1440p, the GPU load increases substantially. Low settings yield 96.3 FPS, but Medium drops to 64.5 FPS, and High falls to 56.2 FPS. The delta between Low and Medium at 1440p is 31.8 FPS, compared to 43.9 FPS at 1080p, indicating that the GPU is becoming the bottleneck more consistently as resolution rises. The Ultra preset at 1440p produces 42.7 FPS, which is only 14.6 FPS lower than High, a smaller gap than the 1080p Ultra-to-High difference of 21.5 FPS.

At 4K, the GPU is clearly the dominant constraint. The RX 6600 XT's 8 GB of GDDR6 memory and 256.0 GB/s bandwidth are insufficient for the pixel workload at 3840x2160. Low settings average 53.4 FPS, but every step up in quality costs significant performance: Medium drops to 39 FPS, High to 32 FPS, and Ultra to 26.4 FPS. The scaling pattern across resolutions shows that the CPU's role diminishes as resolution increases, while the GPU's role becomes more pronounced. At 1080p, the CPU can drive high frame rates, but at 4K, the GPU's raw throughput limits the experience regardless of settings.

Measured FPS Breakdown

At 1920x1080, the measured average frame rates across all four settings are as follows: Low delivers 136.3 FPS, Medium delivers 92.4 FPS, High delivers 79 FPS, and Ultra delivers 57.5 FPS. The progression from Low to Ultra shows a consistent decline, with the largest single-step drop occurring between Low and Medium at 43.9 FPS.

At 2560x1440, the averages are: Low at 96.3 FPS, Medium at 64.5 FPS, High at 56.2 FPS, and Ultra at 42.7 FPS. The gap between Low and Medium narrows compared to 1080p, but the Medium-to-High drop of 8.3 FPS is smaller than the 13.4 FPS drop seen at 1080p.

At 3840x2160, the averages are: Low at 53.4 FPS, Medium at 39 FPS, High at 32 FPS, and Ultra at 26.4 FPS. None of these reach the 60 FPS playable threshold. The delta between Low and Medium is 14.4 FPS, between Medium and High is 7 FPS, and between High and Ultra is 5.6 FPS. Notably, the min and max FPS values are not provided in the data, so only average frame rates are available for this analysis.

How This Combo Ranks

The Intel Core i5-12600KF and AMD Radeon RX 6600 XT combination ranks 2573 out of 3723 tested combos for Rust, placing it in the lower third of the database. This rank reflects the overall performance across all tested scenarios, not just the playable ones. The CPU alone sits at the 79th percentile among all CPUs, while the GPU sits at the 70th percentile among all GPUs, suggesting that the combo's in-game rank is dragged down by the demanding nature of Rust at higher resolutions. The data indicates that while each component is above average in their respective synthetic benchmarks, the game's optimization and the GPU's 8 GB memory capacity limit high-resolution performance. The combo's rank of 2573 out of 3723 means that roughly 69% of tested configurations perform better in Rust, which is consistent with the 4K results showing no playable settings.

Similar Performance Alternatives

For the CPU, the nearest rivals to the Intel Core i5-12600KF are the Intel Core i9-10900K, the AMD Ryzen 5 8500GE, the AMD Ryzen 7 6800U, and the AMD Ryzen 7 5800X3D. The i9-10900K scores 27872, which is 0.3% lower than the i5-12600KF's average benchmark score of 27799. The Ryzen 5 8500GE scores 27712, 0.3% higher than the i5. The Ryzen 7 6800U scores 27887, 0.3% lower. The Ryzen 7 5800X3D scores 27896, also 0.3% lower. These deltaPct values are all within a fraction of a percent, meaning that in CPU-bound scenarios, swapping to any of these chips would produce nearly identical frame rates.

For the GPU, the nearest rivals to the AMD Radeon RX 6600 XT are the NVIDIA GeForce GTX 1630, the Intel Arc A350M, the NVIDIA GeForce GTX 780 Ti, and the NVIDIA GeForce RTX 2080 SUPER. The GTX 1630 scores 24277, 0.7% higher than the RX 6600 XT's average benchmark score of 24442. The Arc A350M scores 24647, 0.8% lower. The GTX 780 Ti scores 24236, 0.8% higher. The RTX 2080 SUPER scores 24170, 1.1% higher. These small deltas mean that in GPU-bound scenarios, the performance difference between the RX 6600 XT and these rivals would be negligible in practice. Users with any of these GPU alternatives can expect similar Rust frame rates, particularly at 1080p and 1440p where the GPU is the primary constraint.

The Verdict

This PC can run Rust at 1080p and 1440p with playable settings, but not at 4K. At 1920x1080, the playable settings are High, Low, and Medium, with High being the best preset at 79 FPS average. At 2560x1440, the playable settings are Low and Medium, with Medium being the best at 64.5 FPS. At 3840x2160, there are no playable settings, as even Low only averages 53.4 FPS, below the 60 FPS threshold. For users prioritizing 1080p gaming, the High preset offers a solid balance of visual quality and performance, with 79 FPS average. For 1440p users, Medium is the recommended choice, delivering 64.5 FPS. The 4K results clearly indicate that this hardware combination is not suitable for Rust at that resolution, and users should either lower their expectations or consider a more powerful GPU.

FAQ

Q: What is the best settings preset for Rust at 1920x1080 with this hardware?

A: The most demanding preset that stays at or above 60 FPS is High, which produces an average of 79 FPS. Ultra falls short at 57.5 FPS.

Q: Can this PC run Rust at 2560x1440?

A: Yes, but only with Low or Medium settings. The best playable preset is Medium, averaging 64.5 FPS. High and Ultra both fail to reach 60 FPS, at 56.2 and 42.7 FPS respectively.

Q: Is 4K gaming possible with the Intel Core i5-12600KF and Radeon RX 6600 XT in Rust?

A: No. At 3840x2160, none of the four tested presets reach 60 FPS. The closest is Low at 53.4 FPS, followed by Medium at 39 FPS, High at 32 FPS, and Ultra at 26.4 FPS.

Q: How does the CPU compare to its nearest rival, the Intel Core i9-10900K?

A: The i9-10900K has an average benchmark score of 27872, which is 0.3% lower than the i5-12600KF's score of 27799. The performance difference is negligible.

Q: How does the GPU compare to the NVIDIA GeForce RTX 2080 SUPER?

A: The RTX 2080 SUPER has an average benchmark score of 24170, which is 1.1% higher than the RX 6600 XT's score of 24442. The RX 6600 XT actually scores higher in this comparison.

Q: What is the overall rank of this combo in the benchmark database for Rust?

A: The combo ranks 2573 out of 3723 tested combinations, placing it in the lower third of all tested systems.