Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 62 | 69 | 107 |
| 1440p QHD | 76 | 99 | 123 | 179 |
| 1080p Full HD | 113 | 151 | 178 | 204 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The Intel Core i5-12400F paired with the AMD Radeon RX 7900 XTX delivers a highly capable Rust experience, but the data reveals a sharp performance cliff at 4K Ultra settings. Benchmark results show that this combination maintains fluid frame rates across most configurations, with the only failure point being 3840x2160 at Ultra, which drops below the 60 FPS playable threshold. The pairing is best understood as a 1440p and 1080p powerhouse that can handle 4K only if the user is willing to step down from the highest preset.
Measured FPS Breakdown
At 1920x1080, the combination produces exceptional frame rates across all four settings. The Low preset averages 203.7 FPS, making it the fastest configuration tested. Medium delivers 177.6 FPS, High reaches 150.9 FPS, and even the demanding Ultra preset holds a strong 113.3 FPS average. These numbers indicate that at 1080p, the system has substantial headroom, with every preset exceeding the 60 FPS threshold by a wide margin.
Moving to 2560x1440, performance remains robust but begins to show the expected scaling cost. Low averages 179.3 FPS, which is still remarkably high. Medium drops to 122.6 FPS, High sits at 99.3 FPS, and Ultra maintains a playable 75.9 FPS. The delta between Low and Ultra at this resolution is 103.4 FPS, showing that the visual settings have a significant impact but never compromise the 60 FPS floor.
At 3840x2160, the picture changes dramatically. Low still performs admirably at 107.1 FPS, and Medium stays above the threshold at 69 FPS. High barely clears the playable mark with 61.8 FPS. However, Ultra falls to 48.3 FPS, which is the only measured configuration across all resolutions and presets that fails to reach 60 FPS. The scaling from 1440p to 4K at Ultra represents a 27.6 FPS loss, a steep decline that highlights the pixel throughput demands of Rust at maximum settings.
The data shows a clear pattern: the system excels at 1080p and 1440p, offering over 60 FPS in every preset, while 4K requires a preset reduction to maintain smooth gameplay. The measured values are averages, with no minimum or maximum frame times provided, so the consistency of these frame rates cannot be fully assessed from the available data.
CPU and GPU Roles
The performance scaling between resolutions and presets indicates that the GPU is the primary bottleneck at higher pixel counts, while the CPU holds its ground across all settings. The Intel Core i5-12400F, with its 6 cores and 12 threads, provides a solid foundation. Its benchmark scores show a single-thread performance of 909 in 3dmark_single_thread and 1680 in cinebench_r23_singlecore, which places it in the 73rd percentile among all CPUs. This strong single-thread capability is relevant for Rust, a game known to be sensitive to CPU throughput.
The GPU, the AMD Radeon RX 7900 XTX, is a high-end RDNA 3.0 part with 6144 shading units and 24 GB of GDDR6 memory. Its 61.39 TFLOPS FP32 compute and 960.0 GB/s memory bandwidth are substantial, yet the 4K Ultra result of 48.3 FPS suggests that the GPU is overwhelmed by the combination of resolution and preset. The transition from 1440p Ultra at 75.9 FPS to 4K Ultra at 48.3 FPS is a 36.3% drop, which is a steeper decline than the 1440p to 1080p scaling. This indicates that at 4K, the GPU becomes the limiting factor, as the CPU is likely capable of feeding more frames if the GPU could render them.
At 1080p, the CPU's role becomes more prominent. The 203.7 FPS at Low and 177.6 FPS at Medium suggest that the GPU has ample headroom, and the frame rate is increasingly tied to CPU performance. The i5-12400F's 12380 score in cinebench_r23_multicore and 19433 in passmark_multithread are respectable, but they do not represent top-tier multi-threaded performance. The system's 510th rank out of 3723 tested combos, which places it in the top 13.7% of configurations, reflects this balanced but not extreme capability.
The scaling between Low and Ultra at each resolution further clarifies the roles. At 1080p, the difference between Low and Ultra is 90.4 FPS, while at 1440p it is 103.4 FPS, and at 4K it is 58.8 FPS. The smaller absolute difference at 4K indicates that the GPU is struggling to keep up with the pixel load at all presets, whereas at lower resolutions, the CPU and GPU work in better harmony, allowing the settings to have a more pronounced effect.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU provide context for what other hardware might behave similarly. The Intel Core i5-12400F is closely matched by the AMD Ryzen 5 7535HS, which has an average benchmark score of 19047 compared to the i5's 19039, a delta of 0%. This suggests that a system with the Ryzen 5 7535HS would produce nearly identical CPU-bound performance. The Intel Core 3 201E is also a close match with a score of 19056, just 0.1% higher. The Intel Core i5-1335U and AMD EPYC 7773X are within 0.3% of the i5-12400F's average score, meaning that these processors would not create a meaningful difference in Rust's frame rates, assuming the GPU remains the same.
For the GPU, the AMD Radeon RX 7900 XTX is compared against some unexpected rivals in the benchmark database. The NVIDIA GeForce GTX 1060 3 GB has an average score of 19334, which is 0.4% lower than the RX 7900 XTX's 19410. This is a surprising comparison, as the GTX 1060 is a much older and less powerful card, but the average benchmark scores are similar. The NVIDIA TITAN Xp scores 19177, which is 1.2% lower, while the NVIDIA Quadro K5200 and AMD FirePro D300 score 19602 and 19637, respectively, putting them 1% and 1.2% higher. These deltas are all within a narrow band of 2.2%, suggesting that the benchmark averages do not fully capture the RX 7900 XTX's strengths in modern games like Rust, where its 24 GB memory and RDNA 3.0 architecture would likely outperform these older cards.
In practical terms, a system using any of these rival GPUs would produce similar average benchmark scores, but the real-world Rust performance could differ significantly due to driver optimizations and architectural advantages. The data does not provide measured FPS for these alternatives, so the comparison is limited to the synthetic benchmark averages.
How This Combo Ranks
The Intel Core i5-12400F and AMD Radeon RX 7900 XTX combination ranks 510th out of 3723 tested combos in Rust. This places the system in the top 13.7% of all configurations in the database, which is a strong result for a mid-range CPU paired with a high-end GPU. The rank reflects the overall capability of the system, but the measured FPS data shows that the ranking is driven by the GPU's strength at lower resolutions and presets, while the CPU's 73rd percentile standing among all CPUs keeps the system from reaching the top tier.
The combo's rank is notable because it outperforms many systems with more expensive or newer CPUs. The i5-12400F's single-thread performance is sufficient to avoid bottlenecking the RX 7900 XTX at most settings, as evidenced by the high frame rates at 1080p and 1440p. However, the 4K Ultra failure suggests that a more powerful CPU would not solve the GPU's limitation at that extreme setting. The rank of 510 indicates that there are 509 other configurations that achieve higher average FPS in Rust, likely featuring top-end CPUs like the Core i9 or Ryzen 9 series alongside similarly powerful GPUs.
The percentile data for the individual components supports this interpretation. The CPU's 73rd percentile is respectable, while the GPU's 64th percentile is lower, indicating that the RX 7900 XTX is not the absolute fastest GPU in the database. This explains why the combo does not crack the top 500, as the GPU's raw performance is the limiting factor for the highest frame rates.
The Verdict
Can this PC run Rust? Yes, with a caveat. The data shows that the system clears the 60 FPS threshold at every resolution and preset except for one: 3840x2160 at Ultra, which averages 48.3 FPS. At 1920x1080, all four presets are playable, with Ultra delivering 113.3 FPS and Low reaching 203.7 FPS. At 2560x1440, all four presets are also playable, with Ultra at 75.9 FPS and Low at 179.3 FPS. At 3840x2160, Low, Medium, and High are playable, with averages of 107.1, 69, and 61.8 FPS respectively.
The verdict by resolution confirms that 1920x1080 and 2560x1440 are fully playable at any setting. For 4K, the system can run the game smoothly at High settings, but Ultra is not recommended due to the sub-60 FPS average. The most demanding preset that maintains 60 FPS at 4K is High, which averages 61.8 FPS. This means that users with a 4K display should prefer High settings over Ultra to avoid stutter and input latency.
The playable threshold is set at 60 FPS, and the system meets this at 11 out of 12 measured configurations. The single failure at 4K Ultra is not a dealbreaker, as the visual difference between High and Ultra in Rust is often subtle, and the frame rate gain from 48.3 to 61.8 FPS is substantial. For competitive play, the 1080p Low preset at 203.7 FPS offers the highest refresh rate potential, while the 1440p Ultra setting provides a balanced visual and performance experience.
Best Settings per Resolution
At 3840x2160, the best settings that stay at or above 60 FPS are High, with an average FPS of 61.8. This is the most demanding preset that remains playable, and it offers a significant visual upgrade over Medium, which averages 69 FPS. The jump from High to Ultra is not worth the performance cost, as the average drops below the threshold to 48.3 FPS.
At 2560x1440, the best settings are Ultra, with an average FPS of 75.9. This preset delivers the highest visual quality while still maintaining a comfortable margin above 60 FPS. The 75.9 FPS average leaves room for occasional dips without falling below the playable threshold, making Ultra the recommended choice for 1440p users.
At 1920x1080, the best settings are also Ultra, with an average FPS of 113.3. This is the optimal configuration for 1080p, as it provides the maximum visual fidelity while still offering frame rates well above the 60 FPS floor. The 113.3 FPS average is high enough to support 100 Hz or 120 Hz displays, and the performance headroom ensures smooth gameplay even in demanding scenes.
For users who prioritize maximum frame rates over visual quality, the Low preset at each resolution offers the highest averages: 203.7 FPS at 1080p, 179.3 FPS at 1440p, and 107.1 FPS at 4K. These settings are ideal for competitive play or for users with high refresh rate monitors, but the visual compromise is considerable. The data suggests that the system is best utilized at 1440p Ultra, where the combination of the i5-12400F and RX 7900 XTX delivers a smooth, high-fidelity experience that is only marginally improved at 1080p.