Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
152 FPS
Ultra 1080p Measured
108 FPS

1440p (2K / QHD)

Low 1440p Measured
131 FPS
Ultra 1440p Measured
76 FPS

4K (Ultra HD)

Low 4K Measured
109 FPS
Ultra 4K Measured
48 FPS
8.4ms Frame Time
13ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 14,185
Graphics Card
Required 28,194
Your GPU 31,087

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 48 64 72 109
1440p QHD 76 104 114 131
1080p Full HD 108 119 127 152

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 119
1920x1080 Low 152
1920x1080 Medium 127
1920x1080 Ultra 108
2560x1440 High 104
2560x1440 Low 131
2560x1440 Medium 114
2560x1440 Ultra 76
3840x2160 High 64
3840x2160 Low 109
3840x2160 Medium 72
3840x2160 Ultra 48

Performance Analysis: Rust on Your System

How This Combo Ranks

The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 4070 Ti SUPER ranks 964th out of 3723 tested combinations in Rust. This places the pairing in the top quarter of all recorded system configurations, indicating a strong overall capability for this title. The ranking reflects the substantial GPU performance headroom, as the RTX 4070 Ti SUPER sits in the 76th percentile among all GPUs in the database, while the i5-10400F holds the 68th percentile among all CPUs. The combination produces a system that is clearly above average, though not near the top of the leaderboard, which is expected given the CPU's older architecture relative to the GPU.

The data shows that the combo's rank is not a limiting factor for playability. A rank of 964 out of 3,723 means the vast majority of tested systems are slower for Rust specifically. The recorded measurements confirm that this pairing can handle the game at high frame rates across most settings and resolutions, with the only exception being Ultra at 4K, which drops below the 60 FPS playability threshold. The overall picture is that of a balanced pairing where the GPU carries the heavier load, but the CPU does not create a bottleneck severe enough to prevent solid performance.

CPU and GPU Roles

The benchmark results indicate a clear division of labor between the Intel Core i5-10400F and the NVIDIA GeForce RTX 4070 Ti SUPER across the three tested resolutions. The CPU's role becomes more prominent at lower resolutions, while the GPU dominates at higher ones. This is visible in the scaling of average frame rates between 1920x1080 and 3840x2160.

At 1920x1080, the frame rates are high across all settings, from 152 FPS at Low to 107.9 FPS at Ultra. The difference between Low and Ultra is approximately 44 FPS, which shows that the GPU is still capable of delivering high output even when the settings are raised. The CPU, with its 6 cores and 12 threads, provides enough single-thread performance to keep up, as evidenced by the minimal drop when moving to higher presets.

Moving to 2560x1440, the frame rates remain strong but show a larger gap between presets. Low yields 130.7 FPS, Medium 113.6 FPS, High 104.4 FPS, and Ultra 76.3 FPS. The transition from 1080p to 1440p causes a moderate drop, but the system still holds above 80 FPS for all but the most demanding preset. This scaling suggests the GPU is becoming more of a limiting factor at this resolution, but the CPU still has enough headroom to avoid bottlenecking.

At 3840x2160, the GPU's role becomes fully dominant. Low runs at 108.5 FPS, Medium at 71.5 FPS, High at 63.9 FPS, and Ultra drops to 47.5 FPS. The difference between 1440p and 4K is stark, particularly for Ultra settings, which fall by nearly 29 FPS. This indicates that at 4K, the RTX 4070 Ti SUPER is the primary constraint, while the CPU's performance becomes less relevant. The scaling from 1080p to 4K shows a clear pattern: the CPU matters most at lower resolutions where the GPU is not fully stressed, and the GPU matters most at higher resolutions where the rendering workload grows.

The preset scaling also reveals the CPU's impact. At 1080p, Low to Ultra only costs about 44 FPS, suggesting the CPU can handle the additional draw calls and physics without significant strain. At 4K, the same preset jump costs about 61 FPS, with the Ultra setting particularly punishing. The data shows that the CPU provides stable frame pacing, but the GPU's compute capabilities, memory bandwidth, and 16 GB of GDDR6X VRAM determine the ceiling at high resolutions.

FAQ

Q: What is the best 4K preset for this combo?

A: The data shows that High is the most demanding preset that stays at or above 60 FPS at 3840x2160, achieving an average of 63.9 FPS. Ultra is not playable at this resolution, as it drops to 47.5 FPS.

Q: Is the RTX 4070 Ti SUPER faster than the NVIDIA TITAN RTX?

A: Yes, the RTX 4070 Ti SUPER has an average benchmark score of 31,087, while the TITAN RTX scores 31,676, which is 1.9% higher. So the TITAN RTX is slightly slower, not faster.

Q: Can this system handle Ultra settings at 1440p?

A: Yes, the recorded data shows an average of 76.3 FPS at 2560x1440 with Ultra settings, which clears the 60 FPS threshold comfortably.

Q: How does the CPU compare to the AMD Ryzen 3 7320C?

A: The Intel Core i5-10400F has an average benchmark score of 14,185, while the Ryzen 3 7320C scores 14,277, which is 0.6% higher. The two are nearly identical in performance.

Q: What happens if I use Low settings at 1080p?

A: The system delivers an average of 152 FPS at 1920x1080 with Low settings, which is the highest frame rate recorded for this combo.

Q: Is the GPU or CPU the limiting factor at 1440p?

A: The data shows the GPU is more significant at 1440p, since the frame rates drop from 130.7 FPS at Low to 76.3 FPS at Ultra, with the CPU maintaining stable performance. The GPU's workload increases with settings, so it becomes the primary constraint.

Similar Performance Alternatives

The nearest rivals to the Intel Core i5-10400F in the database include the Intel Xeon 6756E, which has an average score of 14,163, just 0.2% lower, and the AMD EPYC 7552 with a score of 14,115, which is 0.5% lower. The Intel Core 7 160UL scores 14,232, 0.3% higher, and the AMD Ryzen 3 7320C scores 14,277, 0.6% higher. These CPUs behave similarly in terms of raw compute benchmarks, meaning that a system using any of these processors would deliver comparable frame rates in Rust, assuming the same GPU. The differences are negligible, within a single percentage point, so switching to any of these would not noticeably change gameplay.

For the GPU, the nearest rivals are the NVIDIA Quadro M5000, which scores 31,206, 0.4% lower, and the NVIDIA GRID M60-1Q with a score of 31,220, 0.4% lower. The NVIDIA RTX PRO 4500 Blackwell scores 31,532, 1.4% lower, and the NVIDIA TITAN RTX scores 31,676, 1.9% lower. These GPUs deliver near-identical average performance, so a system with one of these would behave similarly to the RTX 4070 Ti SUPER in Rust. The TITAN RTX, despite being 1.9% higher, would not produce a meaningful difference in frame rates.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 63.9 FPS. The Ultra preset is not playable at this resolution, as it averages 47.5 FPS. Low and Medium also clear the threshold, with 108.5 FPS and 71.5 FPS respectively, but High offers the best visual quality without dropping below the playability threshold.

At 2560x1440, Ultra settings are playable with an average of 76.3 FPS. This is the best visual quality available, and it still provides a comfortable margin above the 60 FPS target. Low, Medium, and High are all faster, but the Ultra preset is the recommended choice for maximum detail.

At 1920x1080, Ultra settings are fully playable with an average of 107.9 FPS. This is the best preset for this resolution, and it delivers a smooth experience with a large frame rate cushion. Low, Medium, and High also all exceed 60 FPS, with Low reaching 152 FPS.

The Verdict

The data shows that this combo can run Rust with clear success. At 1920x1080, Ultra settings produce an average of 107.9 FPS, which is well above the 60 FPS playable threshold. The system is fully playable at every preset up to Ultra, with no settings that fall below 60 FPS. This is the ideal resolution for maximizing detail and frame rate.

At 2560x1440, Ultra also stays above 60 FPS at 76.3 FPS, making it playable with the highest visual quality. All other presets, Low, Medium, and High, also clear the threshold. The system is fully playable at this resolution.

At 3840x2160, the Ultra preset fails to reach the 60 FPS threshold, with an average of 47.5 FPS. High, Medium, and Low are all playable, with High achieving 63.9 FPS. The verdict is that 4K is playable, but only up to High settings, not Ultra.

The overall verdict is that this PC can run Rust at all settings for 1080p and 1440p, and at most settings for 4K, with the single exception being Ultra at 4K.

Measured FPS Breakdown

3840x2160

  • Low: 108.5 FPS average
  • Medium: 71.5 FPS average
  • High: 63.9 FPS average
  • Ultra: 47.5 FPS average

At 4K, the frame rates scale downward as the settings increase. Low is the only preset above 100 FPS, while Ultra drops below the 60 FPS threshold. The drop from Medium to High is small, from 71.5 to 63.9, but the drop from High to Ultra is significant, from 63.9 to 47.5, indicating a heavy performance cost for the highest quality presets.

2560x1440

  • Low: 130.7 FPS average
  • Medium: 113.6 FPS average
  • High: 104.4 FPS average
  • Ultra: 76.3 FPS average

At 1440p, all presets are above the 60 FPS playability threshold. Low is the fastest at 130.7 FPS, and Ultra is the slowest at 76.3 FPS. The difference between Low and Medium is about 17 FPS, and between High and Ultra is about 28 FPS, showing that Ultra is significantly more demanding than High.

1920x1080

  • Low: 152 FPS average
  • Medium: 127.3 FPS average
  • High: 119.1 FPS average
  • Ultra: 107.9 FPS average

At 1080p, the frame rates are consistently high. Low reaches 152 FPS, and even the most demanding preset, Ultra, stays above 100 FPS. The scaling is moderate: Low to Medium drops by about 25 FPS, Medium to High by about 8 FPS, and High to Ultra by about 11 FPS. The GPU remains the primary driver of performance, with the CPU providing a stable base that does not cause a significant frame rate penalty even at the highest settings.

The recorded data shows no minimum or maximum frame values, only averages, so variance is not documented. However, the averages across the board indicate that this system is well-suited for Rust, with only the highest resolution and preset combination falling below the playable threshold.