Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

40%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
149 FPS
Ultra 1080p Measured
97 FPS

1440p (2K / QHD)

Low 1440p Measured
131 FPS
Ultra 1440p Measured
67 FPS

4K (Ultra HD)

Low 4K Measured
91 FPS
Ultra 4K Measured
39 FPS
8.3ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 14,185
Graphics Card
Required 28,194
Your GPU 13,543

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 52 61 91
1440p QHD 67 88 104 131
1080p Full HD 97 121 128 149

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 121
1920x1080 Low 149
1920x1080 Medium 128
1920x1080 Ultra 97
2560x1440 High 88
2560x1440 Low 131
2560x1440 Medium 104
2560x1440 Ultra 67
3840x2160 High 52
3840x2160 Low 91
3840x2160 Medium 61
3840x2160 Ultra 39

Performance Analysis: Rust on Your System

The Intel Core i5-10400F paired with the AMD Radeon RX 9070 XT delivers a playable experience in Rust across all tested resolutions, though the headroom varies sharply. At 1080p, this combo is firmly in high-refresh territory; at 1440p, it remains smooth on max settings; at 4K, you will need to drop to Medium or Low to stay above the 60 FPS threshold. The recorded data shows a clear pattern: the RX 9070 XT carries the load at higher resolutions, while the i5-10400F becomes a more significant factor as resolution drops. Below is a detailed breakdown of the measured performance, settings guidance, and how this combination stacks up against other tested hardware.

Measured FPS Breakdown

The database contains average frame rates for four presets (Low, Medium, High, Ultra) at three resolutions. Minimum and maximum values are only recorded for the Medium preset at each resolution.

1920x1080 (1080p):

  • Low: 149 FPS average
  • Medium: 128 FPS average, with a minimum of 109 FPS and a maximum of 147 FPS
  • High: 121 FPS average
  • Ultra: 97 FPS average

At 1080p, the gap between Low and Ultra is 52 FPS. The Medium preset shows a tight range between min and max (109 to 147), indicating consistent frame delivery. Even at Ultra, the average stays well above the 60 FPS playable threshold, leaving substantial headroom for high refresh rate monitors.

2560x1440 (1440p):

  • Low: 131 FPS average
  • Medium: 104 FPS average, with a minimum of 88 FPS and a maximum of 119 FPS
  • High: 88 FPS average
  • Ultra: 67 FPS average

Moving from 1080p to 1440p costs roughly 20 to 30 FPS depending on the preset. The Ultra preset at 1440p still holds at 67 FPS average, which is above the 60 FPS threshold but with less margin than at 1080p. The Medium preset shows a minimum of 88 FPS, so even the lowest recorded frame stays comfortably playable.

3840x2160 (4K):

  • Low: 91 FPS average
  • Medium: 61 FPS average, with a minimum of 52 FPS and a maximum of 71 FPS
  • High: 52 FPS average
  • Ultra: 39 FPS average

At 4K, the performance cliff is steep. The Medium preset averages 61 FPS, but the minimum recorded frame is 52 FPS, which dips below the playable threshold. High and Ultra presets fall short of 60 FPS on average, with Ultra dropping to 39 FPS. Only Low and Medium are marked as playable at this resolution in the database.

CPU and GPU Roles

The scaling between resolutions and presets reveals which component limits performance. The RX 9070 XT is a high-end GPU with 16 GB of GDDR6 memory and 4096 shading units, while the i5-10400F is a 6-core, 12-thread Comet Lake CPU with a boost clock of 4.30 GHz.

At 4K, the GPU is clearly the dominant factor. The average FPS drops from 91 at Low to 39 at Ultra, a 57% reduction caused almost entirely by increasing pixel workload and graphical detail. The CPU has less influence here because the GPU is saturated. At 1080p, the picture changes. The difference between Low (149 FPS) and Ultra (97 FPS) is still large, but the absolute frame rates are high enough that the CPU's single-thread performance (3dmark single-thread score of 688) begins to matter. The i5-10400F cannot push much beyond 149 FPS in Rust at 1080p Low, suggesting a CPU ceiling around that mark.

The Medium preset data is instructive. At 1080p Medium, the range is 109 to 147 FPS. At 1440p Medium, the range is 88 to 119 FPS. At 4K Medium, the range is 52 to 71 FPS. The minimum frame rate scales more steeply with resolution than the average, which points to GPU-bound spikes at higher resolutions. The CPU's role is most pronounced at 1080p, where the gap between Low and Ultra is 52 FPS, and least pronounced at 4K, where the same gap is also 52 FPS but the absolute values are much lower.

In practical terms, at 1080p the i5-10400F is a mild bottleneck at Low settings, but at Medium and above the GPU still has room to work. At 1440p and 4K, the GPU is the clear limiting factor, and the CPU's 6 cores and 12 threads are sufficient to keep up with the RX 9070 XT at those workloads.

Best Settings per Resolution

The database provides a verdict for each resolution, indicating the highest preset that maintains an average of at least 60 FPS.

1920x1080: The best settings are Ultra, with an average of 97 FPS. All four presets are playable, and Ultra offers the highest visual quality without dropping below the threshold.

2560x1440: The best settings are Ultra, with an average of 67 FPS. This is the highest preset that stays above 60 FPS. High runs at 88 FPS, Medium at 104 FPS, and Low at 131 FPS, but Ultra is the recommended choice since it clears the threshold with a 7 FPS margin.

3840x2160: The best settings are Medium, with an average of 61 FPS. This is the most demanding preset that remains playable, but note the minimum recorded frame is 52 FPS. Low runs at 91 FPS and is also playable. High (52 FPS) and Ultra (39 FPS) are not recommended for maintaining 60 FPS.

For 4K users, the choice between Low and Medium is a trade-off. Medium offers better visuals but sits right at the threshold, with occasional dips below 60 FPS. Low provides a safer buffer with 91 FPS average.

How This Combo Ranks

The database ranks this CPU and GPU combination against all other tested combos in Rust. The combo ranks 1252 out of 3723 combinations, placing it in the upper third of tested systems. This percentile position (roughly the 66th percentile) reflects a balanced pairing that handles Rust well at most settings, but it is not at the top tier where the highest-end CPUs and GPUs sit.

The rank is driven by the GPU's strong raw performance (Passmark G3D score of 26795, percentile of 55 among all GPUs) combined with a mid-range CPU (percentile of 68 among all CPUs). The CPU's average benchmark score of 14185 is respectable but not elite. In Rust, which is known to be CPU-sensitive in certain scenarios, this pairing lands in the upper third of all combos, meaning most players with higher-end CPUs would see better frame rates at 1080p, while the GPU would be the limiting factor at 4K.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for what other hardware would behave similarly.

For the Intel Core i5-10400F, the closest matches in average benchmark score are:

  • Intel Xeon 6756E (delta 0.2% higher)
  • Intel Core 7 160UL (delta 0.3% lower)
  • AMD EPYC 7552 (delta 0.5% higher)
  • AMD Ryzen 3 7320C (delta 0.6% lower)

These CPUs have nearly identical average scores, so swapping the i5-10400F for any of them would result in negligible performance differences in Rust. The Xeon 6756E and EPYC 7552 are server parts, while the Core 7 160UL and Ryzen 3 7320C are lower-power designs, but their benchmark scores cluster within 1% of the i5-10400F.

For the AMD Radeon RX 9070 XT, the nearest rivals are:

  • AMD Radeon HD 7770M (delta 0.1% higher)
  • NVIDIA GeForce GTX 570 (delta 0.2% higher)
  • NVIDIA P106-090 (delta 0.5% higher)
  • AMD Radeon Pro 555 (delta 1% higher)

These GPUs have average scores within 1% of the RX 9070 XT, though they are much older or lower-end parts in terms of architecture. In practice, these scores reflect the database's benchmark methodology, but the recorded data indicates they would produce similar frame rates in Rust at the same settings and resolution.

FAQ

Q: Can this combo run Rust at 4K with playable frame rates?

A: Yes, but only at Low or Medium settings. Low averages 91 FPS, and Medium averages 61 FPS. High and Ultra fall below 60 FPS, with Ultra at 39 FPS.

Q: What is the best preset for 1440p?

A: Ultra is the best preset, averaging 67 FPS. All four presets (Low, Medium, High, Ultra) are above the 60 FPS threshold at 1440p.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: The data suggests the CPU becomes more relevant at 1080p, where the average frames reach 149 FPS on Low. The i5-10400F's single-thread score of 688 likely caps performance around that range, while the GPU has more headroom.

Q: How does this combo rank compared to all tested systems in Rust?

A: It ranks 1252 out of 3723 combos, placing it in the upper third of tested hardware configurations.

Q: What is the minimum FPS recorded for this combo?

A: The lowest recorded minimum is 52 FPS, which occurs at 4K Medium settings. At 1440p Medium, the minimum is 88 FPS, and at 1080p Medium, it is 109 FPS.

Q: Are there any CPUs that would perform nearly identically to the i5-10400F in this setup?

A: Yes. The Intel Xeon 6756E (0.2% higher score), Intel Core 7 160UL (0.3% lower), AMD EPYC 7552 (0.5% higher), and AMD Ryzen 3 7320C (0.6% lower) all have average benchmark scores within 1% of the i5-10400F, so swapping to any of them would yield similar Rust performance.