Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 45 | 55 | 79 |
| 1440p QHD | 59 | 78 | 94 | 131 |
| 1080p Full HD | 90 | 118 | 127 | 146 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The Intel Core i5-10400F paired with the AMD Radeon RX 7800 XT produces a wide spread of frame rates in Rust, depending on resolution and quality preset. The recorded data shows a system that is heavily playable at 1080p, comfortably playable at 1440p with some settings concessions, and only viable at 4K when using the Low preset. This analysis breaks down the measured average FPS for all twelve tested combinations, compares the hardware to nearby alternatives, and identifies the most demanding settings that still clear the 60 FPS playability threshold.
Measured FPS Breakdown
At 1920x1080, the combination delivers strong performance across every preset. The Low preset records an average of 146.4 FPS, which is the highest figure in the entire dataset. Medium follows at 127.2 FPS, then High at 117.5 FPS, and Ultra drops to 90.2 FPS. The gap between Low and Ultra is 56.2 FPS, meaning that even the most demanding preset at 1080p stays well above the 60 FPS threshold. No minimum or maximum FPS values were recorded, so all analysis relies on averages.
At 2560x1440, the frame rates step down but remain respectable. Low records 131.4 FPS, Medium drops to 93.9 FPS, and High settles at 77.6 FPS. Ultra is the only preset that falls below 60 FPS, with an average of 59.4 FPS, which is only 0.6 FPS short of the playability threshold. The drop from Low to Ultra at this resolution is 72.0 FPS, a larger absolute decline than at 1080p. The data suggests that 1440p is viable for High and below, but Ultra should be avoided if aiming for a consistent 60 FPS average.
At 3840x2160, the performance curve becomes steep. Low records 79.3 FPS, which is the only 4K preset that clears 60 FPS. Medium averages 54.8 FPS, High drops to 45.4 FPS, and Ultra falls to 35.2 FPS. The difference between Low and Ultra at 4K is 44.1 FPS, and the scaling from Medium to High to Ultra shows a consistent degradation of roughly 9 to 10 FPS per step. The 4K results indicate that the GPU is heavily taxed at this resolution, with only the least demanding settings providing a playable experience.
Comparing resolutions, the drop from 1080p Low (146.4 FPS) to 1440p Low (131.4 FPS) is 15.0 FPS, while the drop from 1440p Low to 4K Low (79.3 FPS) is 52.1 FPS. The 4K penalty is far more severe than the 1440p penalty, which points to the GPU becoming the limiting factor at higher pixel counts. For the Ultra preset, the scaling from 1080p (90.2 FPS) to 1440p (59.4 FPS) is a 30.8 FPS loss, and then to 4K (35.2 FPS) is another 24.2 FPS loss. The data shows that each resolution step costs roughly a third of the remaining headroom.
Similar Performance Alternatives
In the database, the Intel Core i5-10400F has an average benchmark score of 14185 and sits in the 68th percentile of all CPUs. Its nearest rivals, based on average score, include the Intel Xeon 6756E with a score of 14163, which is 0.2 percent lower. The Intel Core 7 160UL scores 14232, which is 0.3 percent higher. The AMD EPYC 7552 scores 14115, which is 0.5 percent lower. The AMD Ryzen 3 7320C scores 14277, which is 0.6 percent higher. These four processors are all within a one percent band of the i5-10400F, meaning that in CPU-bound scenarios, the frame rates would be nearly indistinguishable. For Rust, where CPU load can be significant during server-side simulation and entity updates, swapping to any of these rivals would likely produce FPS changes of only a few percent at most.
For the GPU, the AMD Radeon RX 7800 XT has an average benchmark score of 11627 and sits in the 51st percentile of all GPUs. Its nearest rivals are the NVIDIA GeForce GTX 1660 with a score of 11680, which is 0.5 percent higher. The AMD Radeon Pro 5500M scores 11528, which is 0.9 percent lower. The NVIDIA Tesla K20c scores 11479, which is 1.3 percent lower. The AMD Radeon RX 6500 XT scores 11842, which is 1.8 percent higher. These four GPUs all fall within a 1.8 percent delta of the RX 7800 XT, which suggests that in GPU-bound scenarios, the performance differences would be minor. However, it is important to note that the RX 7800 XT has 16 GB of memory, while some of these rivals have less, which could affect texture-heavy scenes in Rust even if average scores are similar.
The combination of a CPU in the 68th percentile and a GPU in the 51st percentile means that the system is balanced toward the processor. In Rust, which is known for its server-side tick rate and entity processing, the CPU can matter more than in many other titles. The recorded FPS data, however, shows that the GPU is the limiting factor at 4K, where even the Low preset only reaches 79.3 FPS.
CPU and GPU Roles
The scaling between resolutions and presets reveals which component matters more for Rust at each setting. At 1080p, the CPU has enough headroom to feed the GPU, as evidenced by the high frame rates across all presets. The jump from Low (146.4 FPS) to Ultra (90.2 FPS) is a 56.2 FPS drop, which is entirely due to increased GPU load from higher quality effects, shadows, and draw distances. The CPU is not the bottleneck here, since even the most demanding preset stays above 90 FPS.
At 1440p, the GPU becomes more involved. The drop from Low (131.4 FPS) to Ultra (59.4 FPS) is 72.0 FPS, a larger absolute loss than at 1080p. The fact that Ultra falls just short of 60 FPS suggests that the GPU is reaching its limit at this resolution, while the CPU still has some capacity. The CPU role is still significant, as the 1440p Low result of 131.4 FPS is only 15.0 FPS lower than the 1080p Low result, indicating that the CPU can sustain high frame rates even when pixel count increases.
At 4K, the GPU takes over as the primary limiter. The drop from 1080p Low (146.4 FPS) to 4K Low (79.3 FPS) is 67.1 FPS, while the drop from 1080p Ultra (90.2 FPS) to 4K Ultra (35.2 FPS) is 55.0 FPS. The 4K Medium result of 54.8 FPS and High result of 45.4 FPS show that the GPU cannot maintain 60 FPS at these settings. The CPU, while not irrelevant, has less influence at 4K because the GPU is maxed out. The recorded data indicates that the CPU is the more important component at 1080p and 1440p, while the GPU dominates at 4K.
Comparing the same preset across resolutions provides further insight. For Low, the score goes from 146.4 FPS at 1080p to 131.4 FPS at 1440p (a 10.2 percent drop) and then to 79.3 FPS at 4K (a 39.6 percent drop from 1440p). For Ultra, the score goes from 90.2 FPS at 1080p to 59.4 FPS at 1440p (a 34.1 percent drop) and then to 35.2 FPS at 4K (a 40.7 percent drop from 1440p). The percentage drop from 1440p to 4K is similar for both presets, which confirms that the GPU is the limiting factor at 4K regardless of quality settings.
The Verdict
The verdict by resolution is clear. At 1920x1080, all four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold. The Ultra preset averages 90.2 FPS, which is 30.2 FPS above the playable threshold. This resolution is fully playable with no compromises.
At 2560x1440, the High, Medium, and Low presets are playable. High averages 77.6 FPS, Medium averages 93.9 FPS, and Low averages 131.4 FPS. Ultra averages 59.4 FPS, which is 0.6 FPS below the threshold, so it is not considered playable. The database lists the playable settings for 1440p as High, Low, and Medium, with High being the best setting that stays above 60 FPS.
At 3840x2160, only the Low preset is playable, averaging 79.3 FPS. Medium (54.8 FPS), High (45.4 FPS), and Ultra (35.2 FPS) all fall below 60 FPS. The database lists Low as the only playable setting at 4K. This means that to play at 4K, the user must accept the lowest quality preset, which still provides a playable average but sacrifices visual fidelity.
Overall, this PC can run Rust at 1080p with maximum settings, at 1440p with High settings or lower, and at 4K only with Low settings. The 60 FPS threshold is met at all resolutions, but only with the appropriate preset selection.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 90.2 FPS. This is the highest quality preset available in the dataset, so there is no reason to lower settings at this resolution unless aiming for even higher frame rates.
For 2560x1440, the most demanding preset that stays at or above 60 FPS is High, with an average of 77.6 FPS. Ultra falls to 59.4 FPS, which is below the threshold, so High is the recommended preset for visual quality while maintaining playability.
For 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, with an average of 79.3 FPS. Medium drops to 54.8 FPS, which is below the threshold, so Low is the only option that guarantees playability at this resolution.
These best settings reflect the measured averages. Since no minimum FPS values were recorded, there is no data on frame time consistency beyond the averages. The database does not provide minimum or maximum FPS for any resolution, so all conclusions are based on average FPS alone.
FAQ
Q: Can this PC run Rust at 1080p with Ultra settings?
A: Yes. The measured average FPS for the Ultra preset at 1920x1080 is 90.2, which is above the 60 FPS playable threshold.
Q: What is the best preset for 1440p that stays above 60 FPS?
A: The High preset at 2560x1440 averages 77.6 FPS, making it the most demanding preset that remains playable. The Ultra preset at this resolution averages 59.4 FPS, which is just below the threshold.
Q: Is 4K playable with this hardware?
A: Only with the Low preset. The 3840x2160 Low setting averages 79.3 FPS, while Medium (54.8 FPS), High (45.4 FPS), and Ultra (35.2 FPS) all fall below 60 FPS.
Q: How much FPS is lost when going from 1080p to 4K at the same settings?
A: For the Low preset, the drop is from 146.4 FPS at 1080p to 79.3 FPS at 4K, a loss of 67.1 FPS. For the Ultra preset, the drop is from 90.2 FPS at 1080p to 35.2 FPS at 4K, a loss of 55.0 FPS.
Q: Which component is more important for Rust at 1080p?
A: The data shows that at 1080p, the CPU is not the bottleneck, since even the Ultra preset stays above 90 FPS. The GPU handles the increased settings load, but the CPU provides enough throughput to maintain high frame rates.
Q: What are the nearest rivals to this CPU and GPU in the database?
A: The Intel Core i5-10400F is within 0.6 percent of the Intel Core 7 160UL, AMD Ryzen 3 7320C, Intel Xeon 6756E, and AMD EPYC 7552. The AMD Radeon RX 7800 XT is within 1.8 percent of the NVIDIA GeForce GTX 1660, AMD Radeon Pro 5500M, NVIDIA Tesla K20c, and AMD Radeon RX 6500 XT.
How This Combo Ranks
In the database, this specific combination of Intel Core i5-10400F and AMD Radeon RX 7800 XT ranks 1410 out of 3723 tested combos for Rust. This places it in the 62nd percentile of all combos, meaning that roughly 38 percent of tested configurations perform better in this game. The rank reflects the measured FPS across all resolutions and presets, weighted by the playability threshold of 60 FPS.
The CPU alone sits in the 68th percentile of all CPUs, while the GPU sits in the 51st percentile of all GPUs. The combination rank of 1410 out of 3723 is lower than the CPU percentile would suggest, which indicates that the GPU holds the system back in Rust, particularly at higher resolutions. At 1080p, the combo performs well above the median, but at 4K, the GPU's 51st percentile ranking becomes evident, as only the Low preset is playable.
The rank of 1410 also implies that there are 2313 combos that perform worse in Rust. For a mid-range CPU paired with a mid-range GPU, this is a reasonable position. The data shows that the system is more capable at lower resolutions, and users targeting 1440p or 4K should be aware that the GPU is the limiting factor. The recorded FPS values confirm that the combo is well-suited for 1080p gaming with maximum settings, and acceptable for 1440p with High settings, but 4K gaming requires significant settings reductions.