Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing but may impact FPS.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 23 | 29 | 43 |
| 1440p QHD | 31 | 36 | 46 | 67 |
| 1080p Full HD | 44 | 54 | 66 | 97 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The combination of an Intel Core i3-12100F and an NVIDIA GeForce RTX 3050 4 GB presents a specific performance profile for Rust, a game known for its demanding engine and large-scale multiplayer environments. The measured data shows this system is capable of smooth gameplay, but only within certain resolution and quality boundaries. At 1920x1080, the pairing delivers a solid experience in Low and Medium presets, while at 2560x1440, only the Low preset maintains a playable frame rate. The 4K resolution proves too demanding for this hardware configuration. Benchmark results indicate the system ranks at 3255 out of 3723 tested combinations for Rust, placing it in the lower-middle portion of the performance spectrum for this title.
Measured FPS Breakdown
The measured frame rates reveal a clear progression of performance as resolution and graphical demands change. At 1920x1080, the system delivers an average of 97 FPS on Low settings, which is the highest frame rate recorded across all configurations. Moving to Medium settings at the same resolution, the average drops to 66.4 FPS, still comfortably above the 60 FPS playable threshold. High settings at 1080p yield 54 FPS on average, falling just short of the playable mark, while Ultra settings produce 44.1 FPS average.
At 2560x1440, the performance picture shifts downward. Low settings maintain an average of 66.9 FPS, which clears the playable threshold by a small margin. Medium settings at this resolution drop to 45.5 FPS average, High settings produce 36.4 FPS average, and Ultra settings fall to 30.5 FPS average. The step from 1080p to 1440p costs roughly 30% of the frame rate at Low settings, and the gap widens at higher presets.
The 3840x2160 results show the hardware running out of headroom. Low settings at 4K average 42.9 FPS, Medium settings average 28.5 FPS, High settings average 22.8 FPS, and Ultra settings average 20 FPS. None of these configurations reach the 60 FPS playable threshold, and the difference between Low and Ultra at 4K is less than half the frame rate, indicating the GPU is heavily constrained at this resolution regardless of quality settings.
No minimum or maximum frame rate data is provided in the measured results, so only average FPS figures are available for analysis. The absence of min/max data means the frame pacing and stability characteristics cannot be assessed, but the averages alone are sufficient to identify which configurations meet the playability standard.
CPU and GPU Roles
The performance scaling across resolutions and presets indicates that the GPU is the primary bottleneck in most scenarios, but the CPU's role becomes more relevant at lower resolutions and quality settings. At 1920x1080 Low, the system achieves 97 FPS, which is the highest result in the entire dataset. This suggests that at this configuration, the CPU is capable of feeding the GPU with enough frames to reach near its maximum output, though the RTX 3050 4 GB still limits the absolute ceiling.
As resolution increases, the GPU workload grows faster than the CPU's ability to keep up, which is typical for a balanced mid-range pairing. The transition from 1080p Low (97 FPS) to 1440p Low (66.9 FPS) represents a 31% performance drop, while the transition from 1440p Low to 4K Low (42.9 FPS) represents a 36% drop. These scaling patterns are consistent with a GPU-bound workload, where the CPU's 4 cores and 8 threads provide sufficient processing power to avoid becoming the primary constraint.
The i3-12100F has a boost clock of 4.30 GHz and a TDP of 58 W, with benchmark scores that place it at the 68th percentile among all CPUs. Its Cinebench R23 multi-core score of 11860 and single-core score of 1674 indicate strong single-threaded performance, which is relevant for Rust's game logic and physics simulation. However, the data suggests that even at 1080p Low, the system does not reach frame rates that would indicate CPU saturation, such as 150+ FPS. The RTX 3050 4 GB, with its 2048 shading units and 7.127 TFLOPS FP32 performance, appears to be the limiting factor across all measured configurations.
At 4K, the performance gap between Low and Ultra settings narrows to just 22.9 FPS, which strongly indicates the GPU is fully saturated. The 4 GB memory capacity and 128-bit memory bus with 192.0 GB/s bandwidth likely contribute to this limitation, as higher resolutions and settings require more video memory and memory bandwidth. The CPU's role at 4K is minimal; the system is entirely GPU-bound in this scenario.
Similar Performance Alternatives
The nearest rivals for the Intel Core i3-12100F provide context for its CPU performance in Rust. The Intel Core 3 N355 has an average score of 13492, which is effectively identical to the i3-12100F's average score of 13494, representing a 0% delta. The Intel Core i5-9500 scores 13452, a 0.3% difference, while the Intel Core 5 120UL scores 13594, which is 0.7% higher, and the Intel Core i7-1250U scores 13351, 1.1% lower. These four CPUs would deliver nearly indistinguishable performance in CPU-bound scenarios within Rust, though the i3-12100F's higher boost clock and newer architecture give it a slight edge in single-threaded tasks.
The GPU section lists no nearest rivals for the RTX 3050 4 GB, so direct comparisons with other graphics cards are not available from the data. The GPU's percentile rank of 50 places it exactly at the median of all GPUs in the database, indicating that it offers average performance relative to the full range of graphics cards. The RTX 3050 4 GB has a boost clock of 1740 MHz, 16 RT cores, and 64 TMUs, with a pixel rate of 55.68 GPixel/s and a texture rate of 111.4 GTexel/s.
Given the CPU's performance parity with its listed rivals, users upgrading from an i5-9500 or moving from a Core 3 N355 would see no meaningful change in Rust frame rates when paired with the same GPU. The i7-1250U, being a low-power mobile chip, might exhibit different behavior in sustained loads, but its benchmark score is close enough that the difference would be negligible. The Core 5 120UL is the strongest of the group by a small margin, but the 0.7% delta would not translate into a noticeable FPS difference in real gameplay.
The Verdict
This system can run Rust, but the playable configurations are limited. At 1920x1080, the combination of Low and Medium settings both clear the 60 FPS threshold, with Medium delivering 66.4 FPS average and Low delivering 97 FPS average. The verdict data confirms that 1920x1080 has two playable settings: Low and Medium. At 2560x1440, only the Low preset reaches a playable state, with 66.9 FPS average. The 1440p Medium, High, and Ultra presets all fall below 60 FPS, and the 3840x2160 resolution has no playable settings at any quality level.
For a practical recommendation, 1080p Medium is the highest quality preset that maintains a playable frame rate, offering 66.4 FPS average. Users who prioritize smoothness over visual fidelity can choose 1080p Low for 97 FPS average, which provides a significant headroom above the threshold. At 1440p, the Low preset is the only viable option, and even then, the 66.9 FPS average leaves little margin for demanding in-game scenes with many players or complex bases. The system cannot be recommended for 4K gaming in Rust, as even the lowest settings fail to approach 60 FPS.
The combo rank of 3255 out of 3723 tested combinations places this system in the lower 13% of tested hardware for Rust, which aligns with the measured results showing limited headroom at higher resolutions and settings.
FAQ
Q: Can this PC run Rust at 60 FPS on 1080p?
A: Yes, at 1920x1080 both Low and Medium settings exceed 60 FPS, with Low averaging 97 FPS and Medium averaging 66.4 FPS.
Q: What is the best settings preset for 1440p?
A: The Low preset at 2560x1440 is the only playable option, delivering an average of 66.9 FPS. Medium, High, and Ultra all fall below the 60 FPS threshold.
Q: Is 4K gaming possible with this hardware?
A: No. At 3840x2160, even the Low preset only reaches 42.9 FPS average, and Ultra drops to 20 FPS average. No 4K settings are playable.
Q: How does the CPU compare to similar processors for this game?
A: The i3-12100F has an average benchmark score of 13494, which is nearly identical to the Core 3 N355 (13492) and i5-9500 (13452). The Core 5 120UL is 0.7% faster, and the i7-1250U is 1.1% slower.
Q: Which component limits performance the most?
A: The RTX 3050 4 GB is the primary bottleneck. The performance drop from 1080p Low (97 FPS) to 4K Low (42.9 FPS) shows the GPU's memory bandwidth and capacity struggle at higher resolutions, while the CPU maintains sufficient throughput.
Q: What frame rate can I expect on High settings at 1080p?
A: High settings at 1920x1080 average 54 FPS, which is below the 60 FPS playable threshold. You would need to lower to Medium for a playable experience.
Best Settings per Resolution
The most demanding preset that maintains at least 60 FPS at each resolution is as follows. At 1920x1080, the Medium preset achieves 66.4 FPS average, making it the highest quality playable option. The Low preset also works at 97 FPS, but Medium provides better visual quality while still clearing the threshold. At 2560x1440, the Low preset is the only playable option, delivering 66.9 FPS average. There is no playable configuration at 3840x2160, as the highest average frame rate at that resolution is 42.9 FPS on Low settings, which falls well short of the 60 FPS target.