Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 35 | 41 | 62 |
| 1440p QHD | 45 | 59 | 70 | 104 |
| 1080p Full HD | 65 | 86 | 102 | 151 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 9 9950X3D paired with the AMD Radeon RX 9060 presents a peculiar combination: a flagship 16-core processor working alongside a mid-range graphics card. Benchmark results for Rust show a system that is decisively capable at standard resolutions, yet constrained by GPU limits at higher pixel counts. The measured data reveals a clear pattern where the CPU’s immense headroom is never the bottleneck, leaving the Radeon RX 9060 to define the experience.
Measured FPS Breakdown
The measured frame rates for this combo in Rust show a steady downward curve as resolution climbs, with the gap between Low and Ultra presets widening dramatically. At 1920x1080, the system delivers an average of 151 FPS on Low settings, which drops to 102 FPS on Medium (with a minimum of 86 FPS and maximum of 117 FPS), further to 86 FPS on High, and lands at 65 FPS on Ultra. The 1080p results show that even the most demanding preset clears the 60 FPS threshold, though the margin shrinks to just 5 FPS at Ultra.
Moving to 2560x1440, the averages fall to 104 FPS on Low, 70 FPS on Medium (ranging from 59 FPS to 80 FPS), 59 FPS on High, and 45 FPS on Ultra. The Medium preset at 1440p sits just above the playable threshold, but High dips below it, marking the first notable failure point. The transition from Low to Medium costs 34 FPS, while the jump from Medium to High costs another 11 FPS.
At 3840x2160, the picture becomes more constrained. Low settings produce an average of 62 FPS, Medium drops to 41 FPS (with a minimum of 35 FPS and maximum of 47 FPS), High falls to 35 FPS, and Ultra bottoms out at 27 FPS. The spread between Low and Ultra at 4K is a substantial 35 FPS, indicating that the GPU is heavily taxed by higher visual fidelity settings. Interestingly, the minimum FPS at 1440p Medium (59 FPS) and the average FPS at 4K Low (62 FPS) are nearly identical, suggesting that the GPU’s rendering ceiling is approached in both scenarios.
Similar Performance Alternatives
Looking at the nearestRivals data for the AMD Ryzen 9 9950X3D, the CPU’s average benchmark score of 75779 places it within a hair’s breadth of three other processors. The AMD Ryzen 7 PRO 9755 scores 75738 (a 0.1% difference), the AMD Ryzen 7 PRO 9755X3D scores 75716 (also 0.1%), and the AMD EPYC 8224P scores 75582 (0.3% slower). The Intel Core Ultra 9 285 trails with 75488, a 0.4% gap. In gaming workloads like Rust, any of these CPUs would produce nearly identical frame rates, meaning the choice between them would have negligible impact on measured FPS.
For the AMD Radeon RX 9060, the GPU’s average benchmark score of 16014 places it near the NVIDIA GeForce RTX 3060 Ti, which scores 16129 and is 0.7% faster. The AMD Radeon R9 370X scores 15862 (1% slower), the AMD Radeon RX 7700 scores 15852 (1% slower), and the AMD Radeon Pro W5500 scores 15679 (2.1% slower). In practice, a system with an RTX 3060 Ti would deliver nearly the same FPS in Rust as the RX 9060, with differences well under one frame per second at any given setting. This means the observed 4K Ultra average of 27 FPS would likely be 27 FPS or 28 FPS on the competing card.
CPU and GPU Roles
The data reveals a stark division of labor between the two components. Across all resolutions, the Ryzen 9 9950X3D’s capabilities are far beyond what Rust demands. The CPU’s Cinebench R23 multi-core score of 42018 and single-core score of 2259 indicate massive processing headroom, yet the FPS scaling between resolutions shows this headroom is never utilized. At 1080p Low, the system hits 151 FPS, but at 4K Low it falls to 62 FPS — a 59% reduction that occurs purely because the GPU must render over four times as many pixels. If the CPU were the limiting factor, this resolution scaling would be far less pronounced.
The preset scaling tells a similar story. At 1080p, moving from Low to Ultra reduces FPS from 151 to 65, a 57% drop. At 4K, the same preset change reduces FPS from 62 to 27, a 56% drop. These consistent percentages across resolutions point to the GPU being the sole performance governor. The RX 9060’s 8 GB of GDDR6 memory and 288.0 GB/s bandwidth are likely the constraining resources when settings increase, as higher presets demand more texture memory and shading work.
The CPU’s role is therefore more about maintaining consistency than pushing peak FPS. With 16 cores and 32 threads, the Ryzen 9 9950X3D can easily handle Rust’s simulation and networking overhead, ensuring that hitches or stutters from CPU-side processing are absent. The measured minimum FPS values — such as 86 FPS at 1080p Medium and 59 FPS at 1440p Medium — suggest that even the worst-case frame times are governed by GPU rendering, not CPU bottlenecks. This combo would likely show identical FPS if paired with a cheaper 8-core processor, as the GPU would still be the limiting factor.
The Verdict
This PC can run Rust, but the experience depends heavily on resolution and preset choices. The verdictByResolution data is unambiguous: at 3840x2160, only the Low preset clears the 60 FPS threshold, with an average of 62 FPS. Medium at 4K falls to 41 FPS, High to 35 FPS, and Ultra to 27 FPS. None of these higher presets are playable by the 60 FPS standard.
At 2560x1440, both Low (104 FPS) and Medium (70 FPS) are playable, but High (59 FPS) and Ultra (45 FPS) are not. The Medium preset at 1440p is the sweet spot, offering a 70 FPS average with a minimum of 59 FPS that occasionally dips just below the threshold, though this is likely imperceptible in practice.
At 1920x1080, every preset is playable. Low delivers 151 FPS, Medium 102 FPS, High 86 FPS, and Ultra 65 FPS. The Ultra preset’s average of 65 FPS is above the threshold, though the margin is slim. For competitive play, the Low preset at 1080p with 151 FPS provides the smoothest experience, while Ultra at 65 FPS is viable for those prioritizing visuals.
How This Combo Ranks
Among the 3723 tested combinations in the database, this pairing of the Ryzen 9 9950X3D and RX 9060 ranks 2190th for Rust. This places it in the lower-middle portion of the field, which makes sense given the GPU’s mid-range positioning. The rank is not a reflection of the CPU, which sits in the 95th percentile of all tested processors, but rather of the GPU, which sits in the 59th percentile. The ranking suggests that many other combos achieve higher FPS in Rust, likely those pairing the RX 9060 with a less powerful but still capable CPU, or those using a stronger GPU with a similar processor.
The combo’s rank at 2190 out of 3723 indicates that roughly 41% of tested configurations perform worse. This is not a top-tier gaming rig, but it is far from the bottom. The data implies that for Rust specifically, the GPU choice carries more weight than the CPU choice in determining overall ranking, as the CPU’s performance percentile is far higher than the combo’s rank percentile.
Best Settings per Resolution
The most demanding preset that maintains an average of at least 60 FPS varies by resolution. At 3840x2160, the best playable setting is Low, which produces an average of 62 FPS. This is the only preset at 4K that clears the threshold, and it does so by a narrow 2 FPS margin. Medium at 4K drops to 41 FPS, making it unsuitable.
At 2560x1440, the best playable preset is Medium, with an average of 70 FPS. This provides a meaningful visual upgrade over Low while still maintaining a comfortable margin above the 60 FPS threshold. The High preset at 1440p (59 FPS) is only 1 FPS short of playable, so players with adaptive sync displays might still find it acceptable, but by the strict standard, Medium is the optimal choice.
At 1920x1080, the best playable preset is Ultra, delivering 65 FPS. This allows for maximum visual fidelity at the most common resolution. Players seeking higher frame rates can drop to High (86 FPS) or Medium (102 FPS), but Ultra remains the highest preset that satisfies the 60 FPS requirement.
FAQ
Q: Can this system run Rust at 4K with high settings?
A: No. At 3840x2160 with High settings, the average FPS is 35, well below the 60 FPS playable threshold. Only the Low preset at 4K reaches 62 FPS.
Q: What is the best resolution for this combo?
A: 1920x1080 is the best choice, as all four presets (Low, Medium, High, Ultra) remain at or above 65 FPS. At 1440p, only Low and Medium clear the 60 FPS threshold.
Q: How does the RX 9060 compare to the RTX 3060 Ti in Rust?
A: The RTX 3060 Ti has an average benchmark score of 16129 versus the RX 9060’s 16014, making it 0.7% faster. In Rust, this would translate to less than a 1 FPS difference at any given setting.
Q: Is the Ryzen 9 9950X3D overkill for Rust?
A: The data suggests yes. The CPU ranks in the 95th percentile of all processors, yet the FPS bottleneck consistently originates from the GPU. The system’s FPS at 4K Low (62 FPS) is far below what the CPU alone could support.
Q: What is the lowest FPS recorded for this combo?
A: The lowest measured minimum FPS is 35 FPS, recorded at 3840x2160 with Medium settings. The minimum at 1440p Medium is 59 FPS, and at 1080p Medium it is 86 FPS.
Q: Does the combo rank highly among all tested systems?
A: No, it ranks 2190th out of 3723 tested combinations. This places it in the lower 41% of configurations, reflecting the mid-range GPU’s limitations in Rust.