Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

74%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
138 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
95 FPS
Ultra 1440p Measured
41 FPS

4K (Ultra HD)

Low 4K Measured
56 FPS
Ultra 4K Measured
24 FPS
12.8ms Frame Time
19ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 75,779
Graphics Card
Required 28,194
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 32 38 56
1440p QHD 41 54 64 95
1080p Full HD 60 78 93 138

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 138
1920x1080 Medium 93
1920x1080 Ultra 60
2560x1440 High 54
2560x1440 Low 95
2560x1440 Medium 64
2560x1440 Ultra 41
3840x2160 High 32
3840x2160 Low 56
3840x2160 Medium 38
3840x2160 Ultra 24

Performance Analysis: Rust on Your System

The AMD Ryzen 9 9950X3D and AMD Radeon RX 7600 combination presents a fascinating study in asymmetry: a flagship 16-core processor paired with a mid-range 8 GB graphics card. Benchmark data for Rust reveals that this pairing yields playable performance at 1080p and 1440p, but the GPU becomes a decisive bottleneck at 4K. The measured frames per second across settings tell a clear story of where this system excels and where it falls short.

Best Settings per Resolution

At 3840x2160, no preset achieves the 60 FPS playability threshold. The highest average frame rate recorded in this resolution is 56 FPS on Low settings, which falls short of the required 60 FPS. The Medium preset delivers an average of 38 FPS with a minimum of 32 and maximum of 43, while High drops to 32 FPS average and Ultra bottoms out at 24 FPS average. Consequently, the data indicates that 4K gaming is not viable with this configuration.

Moving to 2560x1440, the situation improves markedly. The Low preset achieves an average of 95 FPS, easily clearing the threshold. The Medium preset delivers an average of 64 FPS, with a minimum of 54 and maximum of 73, which also remains above the 60 FPS line. The High preset averages 54 FPS, just below playable, while Ultra averages 41 FPS. The best settings that maintain at least 60 FPS average are Medium, with an average of 64 FPS. This is the most demanding preset that stays at or above 60 FPS for this resolution.

At 1920x1080, the system fully demonstrates its capability. All four presets—Low, Medium, High, and Ultra—average above 60 FPS. The Low preset hits 138 FPS average, Medium achieves 93 FPS, High reaches 78 FPS, and Ultra averages exactly 60 FPS. The best settings that stay at or above 60 FPS are Ultra, with an average of 60 FPS. This represents the highest visual quality preset that remains playable, making it the optimal choice for maximum fidelity without sacrificing frame rate.

Similar Performance Alternatives

The nearestRivals data provides context for both components. For the AMD Ryzen 9 9950X3D, the closest comparable processors are the AMD Ryzen 7 PRO 9755 with an average score of 75738 and a deltaPct of 0.1, the AMD Ryzen 7 PRO 9755X3D with an average score of 75716 and a deltaPct of 0.1, the AMD EPYC 8224P with an average score of 75582 and a deltaPct of 0.3, and the Intel Core Ultra 9 285 with an average score of 75488 and a deltaPct of 0.4. These rivals are all within 0.4% of the 9950X3D's average score of 75779, indicating that gaming performance in CPU-bound scenarios would be nearly indistinguishable among these processors.

For the AMD Radeon RX 7600, the nearest rivals include the NVIDIA GeForce RTX 3050 OEM with an average score of 15199 and a deltaPct of -0.2, the AMD Radeon Pro 560X with an average score of 15082 and a deltaPct of 0.6, the AMD Radeon 680M with an average score of 15270 and a deltaPct of -0.7, and the NVIDIA GeForce GTX 660 Ti with an average score of 15063 and a deltaPct of 0.7. The RX 7600's average benchmark score is 15171. The performance deltas here are slightly larger but still minor, meaning that swapping the RX 7600 for any of these alternatives would produce similar frame rates in Rust. The RTX 3050 OEM is essentially a statistical tie, while the GTX 660 Ti, despite its age, shows comparable synthetic scores. The integrated AMD Radeon 680M being this close is notable, though its real-world gaming performance would differ due to memory bandwidth constraints.

Measured FPS Breakdown

The measured FPS data offers a granular view of performance scaling across resolutions and settings. At 3840x2160, the averages are 32 FPS on High, 56 FPS on Low, 38 FPS on Medium (with min 32 and max 43), and 24 FPS on Ultra. The gap between Low and High is 24 FPS, while the gap between Medium and Ultra is 14 FPS. This suggests that the GPU's 8 GB memory and 288.0 GB/s bandwidth are severely taxed at 4K, with the Ultra preset likely exceeding memory capacity or fill rate limits.

At 2560x1440, the averages are 54 FPS on High, 95 FPS on Low, 64 FPS on Medium (with min 54 and max 73), and 41 FPS on Ultra. The jump from Low to Medium costs 31 FPS, while the jump from High to Ultra costs 13 FPS. The Medium preset's minimum of 54 FPS indicates occasional dips below the 60 FPS threshold, but the average stays playable. The scaling from 4K to 1440p at Medium settings shows an improvement from 38 to 64 FPS, a 68% increase, which highlights the resolution's impact on GPU load.

At 1920x1080, the averages are 78 FPS on High, 138 FPS on Low, 93 FPS on Medium (with min 79 and max 107), and 60 FPS on Ultra. The progression from Low to Ultra shows a steady decline: 138 to 93 to 78 to 60. The difference between Low and Ultra is 78 FPS, which is substantial. The Medium preset's minimum of 79 FPS provides a comfortable buffer above the 60 FPS threshold. The data reveals that at 1080p, the CPU's strength allows the GPU to stretch its legs, with the Low preset nearly hitting 140 FPS.

The Verdict

The verdict by resolution is unambiguous. At 3840x2160, the playable settings list is empty, and no best settings are defined because no preset reaches an average of 60 FPS. The highest average is 56 FPS on Low, which is still below the threshold. This PC cannot run Rust at 4K with playable frame rates.

At 2560x1440, the playable settings are Low and Medium, with Medium being the best choice at an average of 64 FPS. This clears the 60 FPS bar, though the minimum of 54 FPS suggests that demanding scenes could cause temporary dips. The system is playable at 1440p, but users should accept Medium settings as the ceiling.

At 1920x1080, all four presets—High, Low, Medium, and Ultra—are playable. The best settings are Ultra with an average of 60 FPS, which exactly meets the threshold. This means the system can run Rust at maximum visual quality at 1080p without dropping below the 60 FPS average. Given the Ultra average is precisely 60 FPS, there is no headroom for additional load, but the benchmark confirms it is playable. The answer to whether this PC can run Rust is yes, but only at 1080p and 1440p with specific settings; 4K is out of reach.

FAQ

Q: What is the highest average FPS this combo achieves at 4K in Rust?

A: The highest average FPS at 3840x2160 is 56 FPS on Low settings, which is below the 60 FPS playability threshold.

Q: Which settings at 1440p maintain at least 60 FPS average?

A: At 2560x1440, the Low preset averages 95 FPS and the Medium preset averages 64 FPS. Both are above 60 FPS, with Medium being the most demanding playable option.

Q: Does the Ultra preset at 1080p achieve playable frame rates?

A: Yes, at 1920x1080, the Ultra preset averages exactly 60 FPS, which meets the playable threshold of 60 FPS.

Q: What is the minimum FPS recorded for the Medium preset at 1080p?

A: The Medium preset at 1920x1080 has a minimum FPS of 79 and a maximum of 107, with an average of 93 FPS.

Q: How does the RX 7600 compare to its nearest rival in synthetic benchmarks?

A: The RX 7600 has an average benchmark score of 15171. The NVIDIA GeForce RTX 3050 OEM scores 15199, which is 0.2% higher, making them statistically equivalent.

Q: What is the CPU's percentile ranking among all processors?

A: The AMD Ryzen 9 9950X3D is in the 95th percentile among all CPUs, with an average benchmark score of 75779.

How This Combo Ranks

The comboRankInGame places this configuration at rank 2596 out of 3723 tested combos. This ranking puts it in the lower third of all combinations tested for Rust, which is surprising given the top-tier CPU. The rank reflects the GPU's limitations, particularly at higher resolutions. The 9950X3D's percentileVsAllCpus is 95, meaning it outperforms 95% of all CPUs, but the RX 7600's percentileVsAllGpus is 57, indicating it is only slightly above average. This imbalance explains the overall rank: the CPU is overqualified for the GPU's capabilities. In a game like Rust, which is known for CPU-intensive simulation, the 9950X3D's 16 cores and 32 threads provide ample processing power, but the RX 7600's 8 GB memory and 2048 shading units become the limiting factor at 1440p and 4K. The rank of 2596 out of 3723 suggests that many other combos with more balanced CPU-GPU pairings achieve better overall performance in Rust, even if their CPUs are weaker.

CPU and GPU Roles

The data reveals distinct roles for each component across resolutions. At 3840x2160, the GPU is clearly the dominant bottleneck. The average FPS drops from 56 on Low to 24 on Ultra, a 133% difference, while the CPU's performance is unlikely to vary much across these settings. The 8 GB memory size is a critical constraint; Rust's large worlds and high-resolution textures likely exceed this capacity, causing stutters and low frame rates. The GPU's 128-bit memory bus and 288.0 GB/s bandwidth are insufficient for 4K's 8.3 million pixels. The CPU's role at 4K is minimal because the GPU cannot feed frames fast enough to stress the 9950X3D's capabilities.

At 2560x1440, the GPU is still the primary constraint, but the CPU begins to contribute. The Medium preset averages 64 FPS, and the CPU's strong single-thread performance (3dmark_single_thread score of 1292 and cinebench_r23_singlecore score of 2259) helps maintain stability in Rust's simulation-heavy gameplay. The scaling from Medium to High is a 10 FPS drop (64 to 54), and from High to Ultra is a 13 FPS drop (54 to 41). This pattern suggests that the GPU's fill rate and memory bandwidth are the main limits, but the CPU's 32 threads ensure that background tasks and server-side calculations do not cause frame drops. The minimum FPS of 54 on Medium indicates that the CPU can briefly become a factor during intense moments, but it recovers quickly.

At 1920x1080, the CPU and GPU roles become more balanced. The Low preset hits 138 FPS, which is high enough to approach the CPU's frame generation limit. The 9950X3D's 3dmark_max_threads score of 17184 and passmark_multithread score of 70255 show its strength in multi-threaded workloads, but Rust's core simulation may not scale perfectly across all 32 threads. The Ultra preset averages 60 FPS, and the gap between Medium (93 FPS) and High (78 FPS) suggests that the GPU is still the main limiter, but the CPU is no longer idle. The 1080p data shows that the CPU can sustain frame rates above 130 FPS on Low, but the GPU cannot match that at higher settings. This indicates that at 1080p, the system is GPU-bound for presets above Low, while at 1440p and 4K, the GPU is the sole bottleneck. The CPU's role is to provide a stable foundation, ensuring that frame times remain consistent, but it does not actively limit performance until the GPU is under less load.