Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

74%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
138 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
95 FPS
Ultra 1440p Measured
41 FPS

4K (Ultra HD)

Low 4K Measured
56 FPS
Ultra 4K Measured
24 FPS
12.8ms Frame Time
19ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 54,762
Graphics Card
Required 28,194
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 32 38 56
1440p QHD 41 54 64 95
1080p Full HD 60 78 93 138

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 138
1920x1080 Medium 93
1920x1080 Ultra 60
2560x1440 High 54
2560x1440 Low 95
2560x1440 Medium 64
2560x1440 Ultra 41
3840x2160 High 32
3840x2160 Low 56
3840x2160 Medium 38
3840x2160 Ultra 24

Performance Analysis: Rust on Your System

The AMD Ryzen 9 9900X3D and Radeon RX 7600 combination delivers a playable Rust experience at 1080p and 1440p, but it falls short of the 60 FPS threshold at 4K. At 1920x1080, the system can run the game at Ultra settings with an average of 60 FPS, while at 2560x1440, Medium settings achieve 64 FPS. The data indicates that 4K gaming is not viable for this pairing, as even Low settings only produce 56 FPS.

Measured FPS Breakdown

The benchmark data provides a clear picture of performance across three resolutions and four quality presets. At 3840x2160, the results are consistently below the 60 FPS playability threshold. The Low preset delivers an average of 56 FPS, which is the closest this system gets to playable at 4K. Medium settings drop to 38 FPS average, with a minimum of 32 FPS and a maximum of 43 FPS. High settings average 32 FPS, while Ultra falls to 24 FPS. None of these 4K configurations reach the 60 FPS mark, confirming that the RX 7600 lacks the raw throughput for 4K in Rust.

Moving to 2560x1440 shows a significant improvement. The Low preset produces 95 FPS average, which is well above the playability threshold. Medium settings deliver 64 FPS average, with a minimum of 54 FPS and a maximum of 73 FPS. High settings average 54 FPS, just below the 60 FPS target, while Ultra settings manage only 41 FPS. The gap between Low and Medium is 31 FPS, while the drop from Medium to High is 10 FPS, indicating diminishing returns as quality increases.

At 1920x1080, the system demonstrates its strongest performance. Low settings produce 138 FPS average, Medium settings reach 93 FPS, High settings hit 78 FPS, and Ultra settings maintain 60 FPS. The Medium preset shows a minimum of 79 FPS and a maximum of 107 FPS, providing a stable frame rate range. The scaling from 1440p to 1080p is substantial: Low goes from 95 to 138 FPS, Medium from 64 to 93 FPS, High from 54 to 78 FPS, and Ultra from 41 to 60 FPS. These figures show that resolution has a pronounced effect on performance, with the 1080p results being roughly 45-50% higher across most presets.

Best Settings per Resolution

At 3840x2160, no preset achieves the 60 FPS threshold. The best available option is Low settings, which produce 56 FPS average, but this still falls short of the playability standard. The verdict data confirms this, listing no playable settings for 4K.

For 2560x1440, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 64 FPS. This configuration provides a comfortable margin above the threshold while offering better visual quality than Low, which runs at 95 FPS. High settings at 54 FPS and Ultra at 41 FPS are not viable for maintaining smooth gameplay.

At 1920x1080, Ultra settings are the most demanding playable option, achieving exactly 60 FPS average. This is the maximum quality preset available in the test data, and it clears the threshold. High settings at 78 FPS, Medium at 93 FPS, and Low at 138 FPS all provide substantial headroom above 60 FPS, allowing players to prioritize visual fidelity or frame rate as preferred.

FAQ

Q: Can this PC run Rust at 4K resolution?

A: No. At 3840x2160, the highest average FPS is 56 on Low settings, which is below the 60 FPS playable threshold. The verdict data lists no playable settings for 4K, and Ultra settings drop to 24 FPS average.

Q: What is the best quality setting for 1440p gaming?

A: Medium settings at 2560x1440 deliver 64 FPS average, making it the most demanding preset that clears the 60 FPS threshold. High settings fall to 54 FPS, which is below the playability standard.

Q: How does the RX 7600 handle 1080p Ultra in Rust?

A: At 1920x1080 with Ultra settings, the system achieves exactly 60 FPS average. This is the highest quality preset available in the benchmarks, and it meets the playable threshold, though there is no margin for frame rate drops.

Q: What is the frame rate difference between Low and Ultra at 1080p?

A: The difference is 78 FPS: Low settings produce 138 FPS average, while Ultra settings produce 60 FPS average. This represents a 130% reduction in frame rate when moving from the lowest to the highest quality preset.

Q: Is the Ryzen 9 9900X3D or RX 7600 the limiting factor in this game?

A: The data suggests the GPU is the primary constraint at higher resolutions. At 4K, even Low settings only reach 56 FPS, while the CPU's performance metrics indicate it is a high-tier processor. The frame rate scaling with resolution changes points to GPU-bound behavior.

Q: Does the system provide a stable frame rate at 1440p Medium?

A: Yes, the minimum FPS is 54 and the maximum is 73, with an average of 64. The minimum value is below the 60 FPS target, indicating occasional dips, but the average remains above the threshold.

Similar Performance Alternatives

The CPU and GPU each have nearby rivals that would produce similar Rust performance. For the Ryzen 9 9900X3D, the closest alternatives are the Intel Core Ultra 5 245KF, which scores 55093 in average benchmarks compared to the Ryzen's 54762, a delta of -0.6%. The Intel Core Ultra 5 245K scores 54053, a 1.3% difference, while the Intel Xeon 6505P scores 53701, a 2% delta. The Intel Core i7-14700F scores 53620, representing a 2.1% difference. These processors would deliver nearly identical frame rates in Rust, as the CPU is not the bottleneck in this configuration.

For the RX 7600, the NVIDIA GeForce RTX 3050 OEM has an average benchmark score of 15199, which is 0.2% below the RX 7600's 15171. The AMD Radeon Pro 560X scores 15082, a 0.6% delta, and the AMD Radeon 680M scores 15270, 0.7% higher. The NVIDIA GeForce GTX 660 Ti scores 15063, a 0.7% difference. These GPUs would produce nearly identical frame rates at each resolution and preset, meaning users with these alternatives would see Rust performance within a few FPS of the RX 7600 results.

CPU and GPU Roles

The benchmark data reveals which component matters more for Rust at each resolution. At 3840x2160, the GPU is clearly the limiting factor. The frame rates are uniformly low across all presets, with a maximum of 56 FPS on Low settings. The RX 7600's performance metrics, including a 57th percentile ranking among all GPUs, indicate it is a mid-range card. In contrast, the Ryzen 9 9900X3D sits in the 91st percentile among CPUs, making it a top-tier processor. The 4K results show that the GPU cannot keep up with the CPU's capabilities.

At 2560x1440, the GPU remains the dominant constraint, but the CPU starts to contribute. The jump from Low at 95 FPS to Medium at 64 FPS is a 32.6% reduction, while dropping to High at 54 FPS is another 15.6% decrease. This scaling pattern suggests that the GPU's rendering workload increases significantly with quality, while the CPU has enough headroom to handle the game's simulation and logic tasks. The 1440p results show a balance where the GPU is still the primary bottleneck, but the CPU's strong single-thread performance, as indicated by a 3dmark single-thread score of 1269, ensures consistent frame delivery.

At 1920x1080, the CPU and GPU roles become more balanced. The frame rates are high across all presets, with Low at 138 FPS and Ultra at 60 FPS. The CPU's 12 cores and 24 threads, combined with its high boost clock of 5.50 GHz, provide ample processing power for Rust's complex world simulation. The GPU, while not as powerful as the CPU, can still render at 1080p with high frame rates. The fact that Ultra achieves exactly 60 FPS suggests that the GPU is approaching its limit, but the CPU is not causing any frame rate limitations at this resolution.

The verdict data reinforces this analysis. At 4K, no settings are playable, while at 1440p, Low and Medium are playable, and at 1080p, all four presets are playable. This progression shows that the GPU's performance scales with resolution, while the CPU maintains sufficient performance throughout. In Rust, the GPU is the primary determinant of frame rates at higher resolutions, while the CPU's role becomes more apparent at lower resolutions where higher frame rates demand more processing power.

The Verdict

This PC can run Rust at 1920x1080 and 2560x1440, but not at 3840x2160. At 1080p, all four presets clear the 60 FPS threshold, with Ultra settings achieving exactly 60 FPS average. This is the recommended configuration for maximum visual quality, as it meets the playability standard. At 1440p, Medium settings deliver 64 FPS average, providing a good balance of quality and performance. Low settings at 95 FPS offer high frame rates for competitive play, while High at 54 FPS and Ultra at 41 FPS fall below the threshold.

The 4K resolution is not viable with this hardware combination. The highest available average FPS is 56 on Low settings, which misses the 60 FPS target. Medium, High, and Ultra settings produce 38, 32, and 24 FPS respectively, making the game unplayable at these quality levels. Users seeking 4K performance would need a more powerful GPU, as the RX 7600's 8 GB of GDDR6 memory and 288.0 GB/s bandwidth are insufficient for Rust at this resolution. The verdict is clear: this system is a solid 1080p and capable 1440p machine for Rust, but 4K gaming requires different hardware.