Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
227 FPS
Ultra 1080p Measured
95 FPS

1440p (2K / QHD)

Low 1440p Measured
157 FPS
Ultra 1440p Measured
70 FPS

4K (Ultra HD)

Low 4K Measured
91 FPS
Ultra 4K Measured
39 FPS
8.1ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 57,498
Graphics Card
Required 28,194
Your GPU 41,187

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 54 64 91
1440p QHD 70 91 101 157
1080p Full HD 95 124 153 227

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 124
1920x1080 Low 227
1920x1080 Medium 153
1920x1080 Ultra 95
2560x1440 High 91
2560x1440 Low 157
2560x1440 Medium 101
2560x1440 Ultra 70
3840x2160 High 54
3840x2160 Low 91
3840x2160 Medium 64
3840x2160 Ultra 39

Performance Analysis: Rust on Your System

The AMD Ryzen 9 9900X paired with the NVIDIA GeForce RTX 3080 Ti delivers a wide spread of performance in Rust, scaling from a demanding 4K experience to a high-refresh-rate 1080p machine. The measured data shows that this combination is highly capable, but the playable settings at 4K are restricted by the GPU's limits under maxed-out graphical loads.

Measured FPS Breakdown

The benchmark results provide a clear picture of how this system handles Rust across three resolutions and four presets. All figures are average FPS, as min and max values were not recorded in this dataset.

At 3840x2160 (4K), the combo produces a 54.4 FPS average on the High preset. This is below the 60 FPS playability threshold. Dropping to Medium yields a 63.7 FPS average, which clears the threshold with a modest margin. The Low preset is significantly faster, achieving a 91.2 FPS average. However, pushing the settings to Ultra reduces performance to a 38.5 FPS average, which is the lowest figure recorded for this pairing and is not a smooth experience.

Moving down to 2560x1440 (1440p), the system shows much stronger results. The High preset averages 90.7 FPS, which is a substantial jump from the 4K result. The Medium preset hits 101.4 FPS, and the Low preset reaches a 156.5 FPS average. Even the most demanding Ultra preset at this resolution manages a 69.6 FPS average, confirming that 1440p is a sweet spot for this hardware.

At 1920x1080 (1080p), the CPU and GPU have ample headroom. The Ultra preset averages 94.9 FPS, which is a playable and smooth experience. The High preset reaches 124.3 FPS. The Medium preset averages 152.9 FPS, and the Low preset tops out the chart at a 226.9 FPS average. This indicates that at 1080p, the system is capable of driving high-refresh-rate monitors even with demanding settings.

How This Combo Ranks

The combination of the AMD Ryzen 9 9900X and the NVIDIA GeForce RTX 3080 Ti holds a comboRankInGame rank of 784 out of 3723 tested combinations. This places the pairing in the top percentile of all tested systems for Rust. The data indicates that this is a high-tier setup that should outperform the vast majority of other CPU-GPU pairings in this game's benchmark database. The percentileVsAllCpus for the processor is 92, and the percentileVsAllGpus is 83, suggesting that the CPU is a stronger relative performer in synthetic tests, while the GPU, though still powerful, sits slightly lower in its respective hierarchy.

CPU and GPU Roles

The performance scaling between resolutions and presets reveals the division of labor between the Ryzen 9 9900X and the RTX 3080 Ti. In Rust, the GPU becomes the primary bottleneck as resolution increases, while the CPU's influence is more apparent at lower resolutions and higher frame rates.

The data shows a massive drop in FPS when moving from 1440p to 4K. For instance, the High preset drops from 90.7 FPS at 1440p to 54.4 FPS at 4K, a reduction of about 40%. This steep decline indicates that the RTX 3080 Ti is struggling to fill the increased pixel count at 4K, particularly with the High preset's graphical load. The GPU's 12 GB of VRAM and 912.4 GB/s bandwidth are substantial, but the demands of 4K rendering in Rust are significant.

Conversely, the jump from 1080p to 1440p shows the CPU's role. At the Low preset, the average FPS goes from 226.9 at 1080p to 156.5 at 1440p. While the GPU is still doing more work, the 1080p Low preset result is so high that it is likely limited by the CPU's frame generation capability rather than the GPU. The Ryzen 9 9900X, with its 12 cores and 24 threads, provides ample processing power to feed the GPU at lower resolutions. The data suggests that at 1080p, the processor is the limiting factor, while at 4K, the graphics card takes over as the primary constraint. The Ultra preset at 1440p yields 69.6 FPS, which is above the 4K High result of 54.4 FPS, further confirming that resolution scaling is the dominant variable for GPU load.

Similar Performance Alternatives

Based on the nearest rivals in the benchmark database, several other components would behave similarly to the ones in this setup.

For the CPU, the AMD Ryzen 9 9900X has an average benchmark score of 57498. The closest rivals are the AMD EPYC 9015 with a score of 57555 (a 0.1% difference) and the AMD EPYC 7313 with a score of 57399 (a 0.2% difference). The Intel Core i9-14900 scores 58115, which is 1.1% higher, and the Intel Xeon Platinum 8260M scores 58323, which is 1.4% higher. In practical terms, these CPUs would provide nearly identical performance in Rust, with the i9-14900 being the strongest contender by a slight margin.

For the GPU, the NVIDIA GeForce RTX 3080 Ti has an average benchmark score of 41187. Its nearest rivals include the NVIDIA GeForce RTX 5070, which scores 40377 (2% lower), and the AMD Radeon Pro 5300, which scores 40870 (0.8% lower). On the higher end, the NVIDIA Tesla M40 24 GB scores 41707 (1.2% higher), and the NVIDIA Tesla M40 scores 41897 (1.7% higher). The RTX 5070 is the most relevant modern alternative, and its slightly lower score suggests it would perform comparably, though marginally slower. The Tesla M40 cards are data-center parts and less relevant for gaming, but the numbers show they are in the same performance ballpark.

FAQ

Q: Can this PC run Rust at 4K with High settings?

A: No. The measured average FPS at 3840x2160 with the High preset is 54.4, which is below the 60 FPS playable threshold. The data indicates that Medium settings are the highest playable option at 4K, with an average of 63.7 FPS.

Q: What is the best settings preset for this combo at 2560x1440?

A: At 1440p, all four presets are playable. The best settings are Ultra, which achieves an average FPS of 69.6, exceeding the 60 FPS threshold and providing the highest visual quality.

Q: Is the CPU or GPU the bottleneck in Rust at 1080p?

A: The data suggests the CPU is more of a limiting factor at 1080p. The Low preset averages 226.9 FPS, which is an exceptionally high frame rate. This indicates that the GPU has headroom, and the Ryzen 9 9900X is likely the component determining the maximum frame output in this scenario.

Q: How does the Ryzen 9 9900X compare to the Intel Core i9-14900 in synthetic benchmarks?

A: The Intel Core i9-14900 has a higher average benchmark score of 58115, which is 1.1% faster than the Ryzen 9 9900X's score of 57498. This difference is minimal and would be imperceptible in most gaming scenarios.

Q: What is the best settings preset for this combo at 1920x1080?

A: At 1080p, all presets are playable, including Ultra, which averages 94.9 FPS. This makes Ultra the best setting choice, as it provides the highest fidelity while still maintaining a high frame rate.

Q: Is the RTX 3080 Ti or the RTX 5070 faster?

A: The RTX 3080 Ti has an average benchmark score of 41187. The RTX 5070 has a score of 40377, which is 2% lower. Therefore, the data shows the RTX 3080 Ti is slightly faster than the RTX 5070.

The Verdict

The AMD Ryzen 9 9900X and NVIDIA GeForce RTX 3080 Ti can run Rust, but the experience varies significantly by resolution and settings.

At 3840x2160, the system is playable on Low and Medium presets, with Medium being the best choice, delivering a 63.7 FPS average. The High and Ultra presets do not clear the 60 FPS threshold, so they are not recommended for a smooth experience.

At 2560x1440, the pairing is fully playable on all presets. The best settings are Ultra, which achieves a 69.6 FPS average, making this the highest resolution at which you can max out the game.

At 1920x1080, the system excels. All presets are playable, and the Ultra preset averages 94.9 FPS. This makes 1080p the ideal resolution for high-refresh-rate gaming, with the Low preset reaching 226.9 FPS for competitive play.

In summary, this is a strong combination for Rust, offering a high-quality experience at 1440p and excellent performance at 1080p. The 4K experience is limited to medium settings, which is a typical trade-off for this class of hardware.