Rust

Similar Performance Alternatives

The AMD Ryzen 9 9900X sits in a tightly contested performance cluster. The database shows its average benchmark score of 57498 places it within 1.4% of four nearby processors. The closest match is the AMD EPYC 9015 at 57555, a mere 0.1% ahead. The AMD EPYC 7313 trails by 0.2%, while the Intel Core i9-14900 leads by 1.1% and the Intel Xeon Platinum 8260M leads by 1.4%. In practical terms, any of these CPUs would deliver nearly identical frame pacing in Rust, with differences well below the threshold of perceptible performance.

For the GPU, the AMD Radeon RX 570 scores 28766 on average, placing it in the 74th percentile of all graphics cards. Its nearest rival, the AMD Radeon RX 6800M, scores 28874, just 0.4% higher. The AMD Radeon R9 M295X trails by 0.7%, while the AMD Radeon RX 470 leads by 0.8% and the NVIDIA Quadro RTX 8000 leads by 1.2%. The RX 570 and RX 470 are especially close, sharing the same Polaris architecture family, meaning users moving between these two cards would see almost no difference in Rust's frame output.

The pairing of this CPU and GPU is unusual: the Ryzen 9 9900X is a 12-core, 24-thread desktop processor from the 9000 series with a 92nd percentile ranking among all CPUs, while the RX 570 is an end-of-life graphics card from 2017. Benchmark data indicates the GPU will be the limiting factor in most scenarios, as its performance class is roughly comparable to a mid-range laptop GPU from a later generation, not a flagship desktop part.

How This Combo Ranks

Within the database of tested configurations for Rust, this combination ranks 3510 out of 3723 combos. That places it in the bottom 6% of all tested systems, a position driven overwhelmingly by the GPU's age and limited capabilities. The Ryzen 9 9900X provides ample processing headroom, but the RX 570 cannot translate that into high frame rates in Rust.

The ranking reflects the overall balance of the system. Rust is a game that responds to both CPU and GPU performance, but at the resolutions and settings where this combo struggles, the bottleneck is clearly the graphics card. The data shows no resolution or preset combination where the system achieves a playable 60 FPS average except at 1920x1080 with Low settings. This places the combo far down the list, as most modern systems with even mid-range GPUs would outperform it in Rust's demanding environments.

Measured FPS Breakdown

At 3840x2160, the results are consistently below playable thresholds. High settings yield an average of 17.1 FPS, Medium drops to 19.7 FPS, Low improves to 25.3 FPS, and Ultra falls to 13.4 FPS. The gap between Low and Ultra is 11.9 FPS, showing that the GPU's fill rate and memory bandwidth are severely taxed at 4K resolution. None of these figures approach the 60 FPS playable threshold, and even the best case, Low at 25.3 FPS, is less than half of what would be considered smooth.

At 2560x1440, the situation improves but remains far from playable. High settings average 29.1 FPS, Medium reaches 29.8 FPS, Low jumps to 48.9 FPS, and Ultra drops to 19.7 FPS. The Low preset is the standout, nearly doubling the Ultra result. This suggests that the RX 570's 4 GB of GDDR5 memory and 224.0 GB/s bandwidth are sufficient at lower settings, but the GPU's compute units cannot handle the increased shader complexity at higher presets. Still, 48.9 FPS falls short of 60, and the verdict data confirms no playable settings at this resolution.

At 1920x1080, the only playable configuration emerges. Low settings average 64 FPS, clearing the 60 FPS threshold by a slim margin. Medium settings drop to 47 FPS, High falls to 38 FPS, and Ultra bottoms out at 28.6 FPS. The progression is steep: moving from Low to Medium costs 17 FPS, from Medium to High costs 9 FPS, and from High to Ultra costs 9.4 FPS. The 64 FPS average at Low is the sole data point where this system meets the playable threshold, and it does so with little headroom.

The Verdict

This PC can run Rust, but only under narrowly defined conditions. The verdict data is unambiguous: at 3840x2160 and 2560x1440, there are no playable settings. Every preset at those resolutions fails to reach 60 FPS, with the best case being 1440p Low at 48.9 FPS, still 11.1 FPS short. At 1920x1080, the system clears the threshold with Low settings, achieving a 64 FPS average. This is the only playable configuration recorded.

For users who insist on 1080p gaming, the system works but demands compromise. The Low preset is mandatory; Medium, High, and Ultra all fall below 60 FPS, and Ultra nearly halves the Low result at 28.6 FPS. At higher resolutions, the system is effectively unusable for Rust, as even the lowest settings produce sub-30 FPS averages at 4K and sub-50 FPS at 1440p. The verdict is clear: this is a 1080p Low settings machine for Rust, nothing more.

CPU and GPU Roles

The data reveals a system where the GPU dominates performance constraints at every resolution, but the CPU's strength becomes apparent in the scaling patterns. At 3840x2160, the difference between Low and High averages 8.2 FPS, while at 1920x1080, that same setting gap is 26 FPS. This widening delta at lower resolutions indicates that the CPU has more influence on frame rates when the GPU is less burdened, but the RX 570 still cannot keep up with the Ryzen 9 9900X's capabilities.

Comparing 1080p Low to 1440p Low, the average drops from 64 to 48.9 FPS, a 23.6% reduction. Between 1440p Low and 4K Low, the average falls from 48.9 to 25.3 FPS, a 48.3% reduction. These steep drops with resolution scaling point to the GPU as the primary bottleneck: the RX 570's 5.095 TFLOPS of FP32 compute and 224.0 GB/s memory bandwidth are simply insufficient for higher pixel counts. The CPU, with a Cinebench R23 multi-core score of 32172 and single-core score of 2253, has ample headroom that goes unused in this configuration.

At Ultra settings, the GPU bottleneck becomes even more pronounced. The 1080p Ultra average of 28.6 FPS is only 2.3 FPS higher than the 1440p Ultra result of 19.7 FPS, and both are far below the 60 FPS threshold. This indicates that at maximum settings, the GPU is so saturated that even halving the resolution barely improves performance, a classic sign of a graphics card reaching its architectural limits rather than a CPU constraint. The Ryzen 9 9900X's role is effectively neutralized; it provides a solid foundation, but the RX 570 determines the outcome.

FAQ

Q: What is the best resolution and settings for this system in Rust?

A: The only playable configuration is 1920x1080 with Low settings, achieving a 64 FPS average. All other tested combinations fall below the 60 FPS playable threshold.

Q: Can this system run Rust at 2560x1440?

A: No. The best result at 1440p is Low settings at 48.9 FPS, which is 11.1 FPS short of the playable threshold. High, Medium, and Ultra all average below 30 FPS.

Q: How does the RX 570 compare to its closest rivals?

A: The RX 570 scores 28766 on average, placing it 0.4% behind the RX 6800M, 0.7% ahead of the R9 M295X, 0.8% behind the RX 470, and 1.2% behind the Quadro RTX 8000. These differences are negligible in real-world gaming.

Q: Is the Ryzen 9 9900X the bottleneck in this system?

A: No. The CPU ranks in the 92nd percentile of all processors with a multi-thread score of 54643 in PassMark. The scaling data shows the GPU is the limiting factor, as frame rates drop sharply with resolution increases regardless of CPU headroom.

Q: What is the highest FPS recorded for this combo?

A: The highest average FPS is 64, achieved at 1920x1080 with Low settings. The next best is 48.9 FPS at 2560x1440 with Low settings.

Q: How does this combo rank among all tested systems for Rust?

A: It ranks 3510 out of 3723 combos, placing it in the bottom 6% of tested configurations. This low ranking is attributable to the GPU's age and performance class relative to modern graphics cards.