Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

97%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
194 FPS
Ultra 1080p Measured
84 FPS

1440p (2K / QHD)

Low 1440p Measured
134 FPS
Ultra 1440p Measured
58 FPS

4K (Ultra HD)

Low 4K Measured
79 FPS
Ultra 4K Measured
34 FPS
9.1ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 53,288
Graphics Card
Required 28,194
Your GPU 29,945

Recommendations

Optimize Settings

Try lowering shadows and anti-aliasing for better FPS.

GPU Upgrade

A better graphics card would significantly improve performance.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 34 45 53 79
1440p QHD 58 76 90 134
1080p Full HD 84 110 130 194

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 110
1920x1080 Low 194
1920x1080 Medium 130
1920x1080 Ultra 84
2560x1440 High 76
2560x1440 Low 134
2560x1440 Medium 90
2560x1440 Ultra 58
3840x2160 High 45
3840x2160 Low 79
3840x2160 Medium 53
3840x2160 Ultra 34

Performance Analysis: Rust on Your System

The AMD Ryzen 9 7900X and NVIDIA GeForce RTX 3070 Ti combination delivers a highly playable Rust experience at 1080p and 1440p, but 4K requires a significant settings compromise. Based on measured benchmark data, this pairing sits comfortably in the upper-middle tier of tested configurations, though its performance ceiling is defined more by the GPU than the CPU at higher resolutions.

Similar Performance Alternatives

Looking at the CPU's nearest rivals, the Ryzen 9 7900X (average benchmark score 53,288) is nearly identical in overall performance to the AMD EPYC 7313P (53,206, just 0.2% slower) and the Intel Xeon Phi 7290 (53,469, 0.3% faster). The 7900X also sits within half a percent of the Intel Xeon 634 (52,974, 0.6% slower) and the Intel Core i7-14700F (53,620, 0.6% faster). In practical terms, swapping the 7900X for any of these alternatives would yield virtually indistinguishable frame rates in Rust, as the differences are well within run-to-run variance. The CPU sits at the 91st percentile among all tested processors, indicating it outperforms the vast majority of installed hardware.

For the GPU side, the RTX 3070 Ti (average benchmark score 29,945) is bracketed by the NVIDIA GeForce RTX 5070 Mobile (29,928, 0.1% slower), the AMD Radeon RX 6800 (30,095, 0.5% faster), the NVIDIA GeForce RTX 2080 Ti (29,783, 0.5% slower), and the AMD Radeon RX 6700 (30,433, 1.6% faster). The 3070 Ti places at the 75th percentile among all GPUs. For Rust specifically, the RX 6800 would be the closest direct substitute, as its slightly higher average score suggests near-identical frame pacing. The RTX 2080 Ti, while older, also lands in the same performance envelope. These alternatives matter because Rust's performance at 1440p and above is heavily GPU-bound, so choosing any of these cards would produce similar FPS numbers within the margin of measurement error.

How This Combo Ranks

The combined system ranks 1,324th out of 3,723 tested combinations for Rust, placing it in the 64th percentile of all possible pairings. This means roughly two-thirds of tested systems are slower, while one-third are faster. The ranking reflects that while the CPU is exceptionally strong (91st percentile), the GPU is merely above average (75th percentile), making the graphics card the limiting factor for the highest settings. In Rust, which is known for its demanding rendering of large open-world environments, this rank indicates a system that handles the game competently but does not approach the top-tier performance of flagship GPU pairings. The 3,723-combo pool includes many configurations with newer or higher-end graphics cards, which explains why this setup does not crack the top 1,000 despite its capable processor.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its strongest performance. Low settings produce an average of 194 FPS, which drops to 130 FPS at Medium (minimum 111 FPS, maximum 150 FPS), 110 FPS at High, and 84 FPS at Ultra. The scaling from Low to Ultra shows a 56.7% performance penalty, with each settings tier costing roughly 20-30 FPS. The minimum FPS at Medium (111) remains well above the playable threshold of 60 FPS, indicating stable frame pacing even during demanding scenes.

Moving to 2560x1440, the frame rates remain strong but show the GPU beginning to strain. Low settings deliver 134 FPS average, Medium drops to 90 FPS (minimum 76 FPS, maximum 103 FPS), High yields 76 FPS, and Ultra falls to 58 FPS. The gap between Low and Ultra is 76 FPS, or 56.7% of the Low value. Notably, Ultra at 1440p dips below the 60 FPS threshold, marking the first point in the resolution ladder where the RTX 3070 Ti cannot maintain a consistent 60 FPS at maximum settings.

At 3840x2160, the GPU becomes the clear bottleneck. Low settings still manage 79 FPS average, but Medium drops to 53 FPS (minimum 45 FPS, maximum 61 FPS), High falls to 45 FPS, and Ultra bottoms out at 34 FPS. The 4K Ultra result is less than half of the 1080p Medium performance, illustrating the dramatic cost of rendering Rust's detailed environments at four times the pixel count. The minimum FPS at 4K Medium (45) falls well below playable, suggesting significant frame dips during intensive moments such as base building or large-scale raiding.

The Verdict

This system can run Rust at 60 FPS or above in several configurations. At 1920x1080, all four presets—Low (194 FPS), Medium (130 FPS), High (110 FPS), and Ultra (84 FPS)—clear the 60 FPS threshold with comfortable margins. At 2560x1440, the playable settings are Low (134 FPS), Medium (90 FPS), and High (76 FPS), while Ultra falls short at 58 FPS. For 3840x2160, only Low settings achieve playability, with 79 FPS average; Medium (53 FPS), High (45 FPS), and Ultra (34 FPS) all miss the mark. The data indicates that 1080p Ultra is the highest quality playable preset, offering a 40% buffer above the 60 FPS requirement. At 1440p, High is the maximum playable preset, and at 4K, users must accept Low settings for a smooth experience. This pattern shows that the RTX 3070 Ti's 8 GB of GDDR6X memory and 256-bit bus are sufficient for 1080p and 1440p, but the 4K Ultra preset demands more GPU throughput than this card can deliver.

FAQ

Q: Can this PC run Rust at 60 FPS on Ultra settings at 1080p?

A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 84, which exceeds the 60 FPS playable threshold by 40%.

Q: What is the best playable preset at 1440p?

A: High settings at 2560x1440 achieve an average of 76 FPS, making it the most demanding preset that stays above 60 FPS. Ultra settings at this resolution drop to 58 FPS average, which is below the threshold.

Q: Is 4K playable with this combination?

A: Only at Low settings, which produce an average of 79 FPS. Medium (53 FPS), High (45 FPS), and Ultra (34 FPS) all fail to reach 60 FPS average.

Q: How much performance is lost going from 1080p to 4K at the same settings?

A: At High settings, the average FPS drops from 110 at 1920x1080 to 76 at 2560x1440 to 45 at 3840x2160. This represents a 59% reduction from 1080p to 4K.

Q: Which component limits performance at 4K?

A: The GPU is the limiting factor. The CPU's 91st percentile ranking and 12-core/24-thread configuration provide ample headroom, but the RTX 3070 Ti's 75th percentile GPU score cannot sustain high frame rates at 3840x2160 with demanding presets.

Q: Does the system maintain stable frame times at playable settings?

A: At 1080p Medium, the minimum FPS is 111 and the maximum is 150, showing a tight 39 FPS range. At 1440p Medium, the range is 76 to 103 FPS (27 FPS spread). At 4K Low, no minimum/maximum data is provided, but the 79 FPS average suggests adequate stability.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, achieving an average of 84 FPS. This provides a 40% cushion over the playable threshold, making it the recommended choice for full visual fidelity without frame rate concerns. At 2560x1440, High is the highest playable preset with 76 FPS average, offering a 26.7% buffer; Ultra at 58 FPS falls just short. For 3840x2160, Low is the only playable option at 79 FPS average, though the margin is substantial. The progression from 1080p Ultra to 1440p High to 4K Low represents a consistent step-down in visual quality as resolution increases, reflecting the GPU's diminishing ability to maintain frame rates at higher pixel counts. Users prioritizing smoothness over fidelity should consider that 1080p High (110 FPS) and 1440p Medium (90 FPS) provide even larger margins above 60 FPS, which may be preferable for competitive play where Rust's PvP encounters benefit from higher frame rates.

CPU and GPU Roles

The benchmark data reveals a clear division of labor between the Ryzen 9 7900X and the RTX 3070 Ti across resolutions. At 1920x1080, the CPU's influence is most pronounced. The 7900X's strong single-thread performance (2,016.5 in Cinebench R23 single-core) ensures that even at Low settings with 194 FPS average, the processor does not bottleneck the GPU. The frame rate scaling from Low to Ultra (194 to 84 FPS) shows a 56.7% drop, which is primarily driven by GPU workload increases, but the fact that even Ultra exceeds 60 FPS indicates the CPU can feed the GPU sufficiently at all settings.

At 2560x1440, the GPU begins to dominate. The transition from Low (134 FPS) to Medium (90 FPS) to High (76 FPS) shows diminishing returns as the GPU approaches its throughput limit. The 58 FPS average at Ultra confirms that the RTX 3070 Ti's compute resources (21.75 TFLOPS FP32) are saturated. The CPU's role diminishes because the higher pixel count increases GPU workload per frame, reducing the frequency at which the CPU must deliver draw calls. The 7900X's 12 cores and 24 threads are more than sufficient for Rust's multithreaded rendering pipeline at this resolution.

At 3840x2160, the GPU is the overwhelming bottleneck. The 34 FPS at Ultra versus 79 FPS at Low shows a 57% performance spread, entirely attributable to GPU load. The CPU's 83.2 GB/s memory bandwidth and 64 MB of L3 cache are irrelevant when the GPU cannot process frames fast enough. This pattern—where the CPU matters most at low resolutions and high frame rates, while the GPU dominates at high resolutions—is typical for Rust's engine. The data suggests that pairing the 7900X with a more powerful GPU would yield substantial gains at 4K, while upgrading the CPU alone would provide negligible benefits beyond 1440p.