Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

97%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
193 FPS
Ultra 1080p Measured
83 FPS

1440p (2K / QHD)

Low 1440p Measured
135 FPS
Ultra 1440p Measured
58 FPS

4K (Ultra HD)

Low 4K Measured
82 FPS
Ultra 4K Measured
35 FPS
9.1ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 51,947
Graphics Card
Required 28,194
Your GPU 29,945

Recommendations

Optimize Settings

Try lowering shadows and anti-aliasing for better FPS.

GPU Upgrade

A better graphics card would significantly improve performance.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 47 52 82
1440p QHD 58 73 89 135
1080p Full HD 83 110 132 193

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 110
1920x1080 Low 193
1920x1080 Medium 132
1920x1080 Ultra 83
2560x1440 High 73
2560x1440 Low 135
2560x1440 Medium 89
2560x1440 Ultra 58
3840x2160 High 47
3840x2160 Low 82
3840x2160 Medium 52
3840x2160 Ultra 35

Performance Analysis: Rust on Your System

The AMD Ryzen 9 5950X and NVIDIA GeForce RTX 3070 Ti combination delivers a solid, but not flawless, Rust experience. At 1080p and 1440p, this pairing provides highly playable frame rates across most presets, while 4K remains a challenge unless settings are dropped significantly. The data indicates that this combo is best suited for high-refresh-rate gaming at 1440p, where it balances visual fidelity and performance effectively.

Measured FPS Breakdown

The benchmark data for this combo shows clear performance scaling across resolutions and presets. At 1920x1080, the system delivers its strongest results. With Low settings, the average frame rate hits 192.6 FPS, which is the highest recorded figure for this combination. Moving to Medium settings reduces the average to 131.6 FPS, while High settings still maintains a strong 110.2 FPS. The most demanding preset, Ultra, yields an average of 83.3 FPS, keeping the experience well above the 60 FPS playability threshold.

At 2560x1440, performance remains robust but predictably lower than 1080p. The Low preset produces an average of 134.9 FPS, which is a significant drop from the 1080p Low result but still excellent for competitive play. Medium settings average 89 FPS, and High settings deliver 73.3 FPS. The Ultra preset dips to 57.9 FPS, which falls just below the playable threshold of 60 FPS, indicating that this setting is not ideal for a consistently smooth experience at this resolution.

The 3840x2160 results show the most significant performance hit. Here, the Low preset averages 82 FPS, which is the only setting at this resolution that comfortably exceeds the playable threshold. Medium settings drop to 52.4 FPS, High settings to 46.9 FPS, and Ultra to 34.6 FPS. These numbers clearly illustrate that 4K gaming with this combo requires substantial compromises in visual quality to maintain playable frame rates. The gap between Low and Ultra at 4K is over 47 FPS, highlighting the extreme sensitivity of this game to settings at higher resolutions.

Best Settings per Resolution

For each resolution, the data points to a single most demanding preset that remains at or above 60 FPS. At 1920x1080, the Ultra preset achieves an average of 83.3 FPS. This is the best visual quality setting that still clears the playability threshold, making it the recommended choice for users who prioritize image fidelity without sacrificing smoothness. The margin here is comfortable, with over 23 FPS of headroom above the 60 FPS target.

At 2560x1440, the High preset is the best option, delivering an average of 73.3 FPS. This provides a meaningful improvement in visual detail over Medium, while still maintaining a safe buffer above the minimum playable frame rate. The Ultra preset at this resolution falls short at 57.9 FPS, so High represents the optimal balance between quality and performance.

For 3840x2160, the only playable setting is Low, which averages 82 FPS. This is a stark contrast to the lower resolutions, as users must sacrifice nearly all graphical enhancements to achieve a playable experience. The Medium preset at 52.4 FPS is not viable for smooth gameplay, and the higher presets are even less suitable. The data suggests that 4K gaming with this hardware is only feasible with minimal settings.

CPU and GPU Roles

The performance scaling across resolutions and presets reveals a clear division of labor between the CPU and GPU. At 1920x1080, the frame rates are exceptionally high, with the Low preset reaching 192.6 FPS. This suggests that the AMD Ryzen 9 5950X, with its 16 cores and 32 threads, is well-equipped to feed the GPU efficiently at this resolution. The substantial drop from Low to Medium (61 FPS) and the continued decline through Ultra indicates that the game becomes increasingly GPU-bound as settings rise, but the CPU is not a limiting factor at 1080p.

When moving to 2560x1440, the frame rates decrease across all presets, but the pattern remains consistent. The Low preset at 134.9 FPS shows a 30% reduction compared to 1080p, which is a larger drop than what would be expected from resolution scaling alone. This points to the GPU becoming more of a bottleneck at this resolution, as the increased pixel count demands more from the RTX 3070 Ti. The CPU still has ample headroom, as evidenced by the high frame rates even at Low settings.

At 3840x2160, the GPU is clearly the dominant constraint. The Low preset at 82 FPS is a dramatic reduction from the 1440p result, and the higher presets fall below playable thresholds. This pattern confirms that the GPU's memory bandwidth and processing power are the limiting factors at 4K, while the CPU's role diminishes. The scaling between resolutions — from 192.6 FPS at 1080p Low to 82 FPS at 4K Low — shows a 57% performance loss, which is primarily attributable to the GPU's inability to maintain throughput at higher pixel counts. The data indicates that for this game, the CPU is more than sufficient for any resolution, but the GPU determines the ceiling for playable settings at 1440p and above.

FAQ

Q: Can this combo run Rust at 60 FPS on Ultra settings at 1080p?

A: Yes. The benchmark data shows an average of 83.3 FPS at 1920x1080 with Ultra settings, which is comfortably above the 60 FPS playable threshold.

Q: What is the best setting for 1440p gaming with this hardware?

A: The High preset is the best choice at 2560x1440, delivering an average of 73.3 FPS. Ultra settings at this resolution fall to 57.9 FPS, which is just below the playable threshold.

Q: Is 4K gaming viable with the RTX 3070 Ti and Ryzen 9 5950X in Rust?

A: Only with significant compromises. The Low preset at 3840x2160 averages 82 FPS, but Medium drops to 52.4 FPS, and Ultra falls to 34.6 FPS. Higher settings are not playable.

Q: How much performance is lost when going from 1080p to 1440p?

A: At Low settings, the average frame rate drops from 192.6 FPS at 1080p to 134.9 FPS at 1440p, a reduction of roughly 30%. At High settings, the drop is from 110.2 FPS to 73.3 FPS.

Q: Does the CPU or GPU limit performance more in Rust?

A: At 1080p, the CPU is sufficient, and the GPU handles settings scaling well. At 1440p and especially 4K, the GPU becomes the primary limiting factor, as shown by the steep frame rate declines at higher resolutions.

Q: What frame rate can be expected with Medium settings at 1440p?

A: The average is 89 FPS at 2560x1440 with Medium settings, providing a smooth experience with a substantial margin above the 60 FPS threshold.

Similar Performance Alternatives

For the CPU, the Ryzen 9 5950X sits near several comparable processors. The Intel Core Ultra 5 235HX has an average score of 52073, which is 0.2% lower than the 5950X's 51947 average benchmark score. The AMD EPYC 8124P scores 52121, a 0.3% difference. The Intel Core i9-13900F is nearly identical at 51730, just 0.4% lower, while the Intel Core i7-14700 scores 52301, 0.7% higher. These processors would behave very similarly in Rust, with performance differences likely imperceptible in real-world gameplay.

On the GPU side, the RTX 3070 Ti's average benchmark score of 29945 is closely matched by several alternatives. The NVIDIA GeForce RTX 5070 Mobile scores 29928, a negligible 0.1% difference. The AMD Radeon RX 6800 is slightly faster at 30095, a 0.5% advantage, while the NVIDIA GeForce RTX 2080 Ti trails at 29783, a 0.5% deficit. The AMD Radeon RX 6700 scores 30433, which is 1.6% higher. These GPUs would provide nearly identical frame rates in Rust, meaning users with any of these cards would see similar performance characteristics at each resolution and preset combination.

How This Combo Ranks

The combination of the Ryzen 9 5950X and RTX 3070 Ti ranks 1319 out of 3723 tested combos in Rust, placing it in the upper third of all systems evaluated. This percentile position reflects the strong performance seen in the measured FPS data, particularly at 1080p and 1440p. The rank suggests that while this is not a top-tier system for Rust, it outperforms a majority of tested configurations.

The ranking is consistent with the benchmark results. The combo's ability to maintain 60 FPS at Ultra settings in 1080p and High settings in 1440p puts it ahead of many lower-end pairings. However, the 4K limitations and the 75th percentile GPU score indicate that there is room for improvement with more powerful graphics cards. The CPU's 91st percentile ranking shows it is less of a bottleneck, meaning that users looking to upgrade would benefit most from a faster GPU rather than a newer processor. Overall, this combo is a competent performer for Rust, offering a smooth experience at mainstream resolutions with only 4K requiring significant settings reductions.