Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 26 | 31 | 46 |
| 1440p QHD | 33 | 44 | 52 | 78 |
| 1080p Full HD | 49 | 64 | 76 | 113 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
FAQ
Q: Can this PC run Rust at 4K resolution?
A: No. At 3840x2160, the highest average FPS recorded is 46 on Low settings. The Ultra preset averages only 20 FPS, High averages 26 FPS, and Medium averages 31 FPS. None of these meet the 60 FPS playable threshold.
Q: What is the best playable setting at 1440p?
A: At 2560x1440, only the Low preset clears the 60 FPS threshold, with an average of 78 FPS. Medium averages 52 FPS, High averages 44 FPS, and Ultra averages 33 FPS, all below the playable threshold.
Q: What is the maximum playable preset at 1080p?
A: At 1920x1080, the High preset reaches an average of 64 FPS, which is the most demanding playable setting. Medium averages 76 FPS, Low averages 113 FPS, and Ultra drops to 49 FPS.
Q: How much CPU headroom does this combo have in Rust?
A: The Ryzen 9 5950X sits in the 91st percentile among all CPUs, with an average benchmark score of 51947. Its nearest rivals include the Intel Core i9-13900F (0.4% higher) and the Intel Core i7-14700 (0.7% higher). The GPU is the limiting factor at every resolution.
Q: Where does the GTX 1070 rank among all GPUs?
A: The GTX 1070 sits in the 47th percentile of all GPUs, with an average benchmark score of 9780. Its nearest rivals are the AMD FirePro W5000 (0.2% lower), NVIDIA Quadro M2000M (0.5% lower), and NVIDIA Tesla M10 (0.6% higher).
Q: How does this combo rank among all tested combinations?
A: This CPU and GPU combination ranks 3082 out of 3723 tested combos in Rust, placing it in the lower portion of the database's measured configurations.
Similar Performance Alternatives
For the CPU, the AMD Ryzen 9 5950X performs nearly identically to three other processors in the database. The Intel Core Ultra 5 235HX scores within 0.2% of the Ryzen, while the AMD EPYC 8124P is within 0.3%. These processors would deliver virtually interchangeable CPU-bound performance in Rust. The Intel Core i9-13900F scores 0.4% higher, a negligible margin, and the Intel Core i7-14700 is 0.7% below. For a game like Rust, which can be heavily CPU-dependent in complex scenes with many entities, any of these processors would produce similar frame pacing.
For the GPU, the closest rivals are less well-known. The AMD FirePro W5000 is within 0.2% of the GTX 1070's average score, and the NVIDIA Quadro M2000M is 0.5% lower. These are all professional or mobile-oriented cards, but their benchmark scores suggest they would behave comparably in Rust. The NVIDIA Tesla M10 and Tesla C2070 match within 0.6% to 0.7%. In practical terms, the GTX 1070's nearest rivals are not direct consumer gaming alternatives, but if you are looking at the database's score distribution, these are the closest matches.
The key takeaway is that the CPU is far stronger than the GPU in this pairing. The Ryzen 9 5950X sits near the top of the CPU distribution, while the GTX 1070 sits just below the median for GPUs. Any of the rival CPUs would not change the outcome in Rust, as the bottleneck is clearly on the graphics side. Swapping the GPU for one of its nearest rivals would also yield nearly identical results, within a fraction of a percentage point.
CPU and GPU Roles
The data reveals a clear division of labor in this pairing. At 1920x1080, the GPU still leads to frame rate drops when settings increase, indicating the GPU is the primary constraint. At Low settings the average is 113 FPS, but stepping to Medium drops to 76 FPS (a 33% reduction), and High falls to 64 FPS (another 16% drop). The Ultra preset averages 49 FPS, which is 57% below the Low result. These reductions are consistent with GPU-bound scaling, where higher visual fidelity directly translates to lower frame rates.
At 2560x1440, the same pattern holds but with lower absolute numbers. Low averages 78 FPS, Medium 52 FPS, High 44 FPS, and Ultra 33 FPS. The gap between Low and Ultra is 58%, similar to the 1080p gap of 57%. This suggests that the GPU is scaling predictably with resolution and settings, and the CPU is not introducing a bottleneck at these levels.
At 3840x2160, the GPU is heavily stressed. Low averages 46 FPS, Medium 31 FPS, High 26 FPS, and Ultra 20 FPS. The drop from Low to Ultra is 57%, again consistent with GPU-bound behavior. The Ryzen 9 5950X, with its 16 cores and 32 threads, is clearly not the limiting factor here. Its 91st percentile CPU ranking means it can feed the GPU more than enough data. Even at 1080p Low, where the GPU has less to do, the CPU does not push the frame rate beyond what the GPU can render.
Across all resolutions, the scaling pattern is smooth and gradual, which points to a GPU-limited system. If the CPU were the bottleneck, we would expect to see frame rates plateau at a certain level regardless of resolution or settings. Instead, the data shows that lower resolutions and lower presets consistently produce higher FPS, which is the signature of GPU-bound performance.
How This Combo Ranks
The recorded combination of the Ryzen 9 5950X and GTX 1070 ranks 3082 out of 3723 tested combinations in Rust. This places it in the lower 17% of the database. The ranking reflects the GPU's modest position (47th percentile) rather than the CPU's strength (91st percentile). Many combinations with slower processors but faster GPUs would rank higher, because Rust's performance at the tested settings is mostly dependent on the graphics card.
The rank of 3082 is a composite measure that weighs the game's measured FPS across all resolutions and presets. Since the GPU is the limiting factor, the combo's rank is pulled down by the GPU's inability to hold 60 FPS at higher settings. The CPU's high benchmark scores do not compensate in this game, as the GPU cannot render frames fast enough to use all the CPU throughput.
It is notably the combo rank is not the same as an average of the CPU and GPU individual percentiles. The low GPU percentile (47) dominates the result, and the high CPU percentile (91) provides only a minor boost. In games with lighter graphics requirements, this pairing might rank higher, but in Rust at these settings, the GPU is the deciding factor.
The Verdict
This PC can run Rust, but only at certain resolutions and presets. At 1920x1080, the playable settings are Low, Medium, and High. The High preset averages 64 FPS, which is above the 60 FPS threshold, and is the best playable setting. The Medium preset averages 76 FPS, and Low averages 113 FPS. The Ultra preset fails to reach 60 FPS with an average of 49 FPS.
At 2560x1440, only Low is playable, with an average of 78 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 52, 44, and 33 FPS respectively. The best playable setting at this resolution is Low, which delivers a comfortable margin above the threshold.
At 3840x2160, no setting is playable. The Low preset averages 46 FPS, which is the highest at this resolution, but it still falls short of the 60 FPS threshold. Medium averages 31 FPS, High averages 26 FPS, and Ultra averages 20 FPS. The game is not playable at 4K with this combo.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 64 FPS. This is the highest quality setting that still delivers smooth gameplay. The Ultra preset drops to 49 FPS, so it is not recommended.
At 2560x1440, the only preset that reaches 60 FPS or higher is Low, with an average of 78 FPS. Medium, High, and Ultra all fall below the threshold, so Low is the best playable choice.
At 3840x2160, there is no playable preset. The highest average is 46 FPS on Low, which is below the 60 FPS threshold. No settings are recommended for 4K.
Measured FPS Breakdown
1920x1080
- Low: Average 113 FPS, minimum and maximum not recorded.
- Medium: Average 76 FPS, minimum 64, maximum 87.
- High: Average 64 FPS, minimum and maximum not recorded.
- Ultra: Average 49 FPS, minimum and maximum not recorded.
2560x1440
- Low: Average 78 FPS, minimum and maximum not recorded.
- Medium: Average 52 FPS, minimum 44, maximum 60.
- High: Average 44 FPS, minimum and maximum not recorded.
- Ultra: Average 33 FPS, minimum and maximum not recorded.
3840x2160
- Low: Average 46 FPS, minimum and maximum not recorded.
- Medium: Average 31 FPS, minimum 26, maximum 35.
- High: Average 26 FPS, minimum and maximum not recorded.
- Ultra: Average 20 FPS, minimum and maximum not recorded.
The data shows that the Medium presets have recorded minimum and maximum values, while other presets only have average figures. This is due to the measurement methodology, but the averages alone are sufficient to determine playability. The minimum FPS values for Medium at all resolutions are below the average, but they remain above the playable threshold at 1080p only in the case of Medium (64 FPS minimum) and not at higher resolutions (at 1440p Medium the minimum is 44 FPS, at 4K Medium the minimum is 26 FPS).
The frame rates scale consistently with settings and resolution. The largest jump is from Low to Medium at 1080p, where the average drops by 37 FPS. The smallest jump is from High to Ultra at 1440p, where the average drops by 11 FPS. This pattern indicates that the GPU is the primary limiting factor, and the CPU's high performance does not compensate for the GPU's limitations at high settings.