Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Rust
Survival 2018

Rust

72%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
204 FPS
Ultra 1080p Measured
107 FPS

1440p (2K / QHD)

Low 1440p Measured
165 FPS
Ultra 1440p Measured
71 FPS

4K (Ultra HD)

Low 4K Measured
98 FPS
Ultra 4K Measured
46 FPS
7.3ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,463
Your CPU 51,947
Graphics Card
Required 28,194
Your GPU 13,745

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 59 64 98
1440p QHD 71 93 115 165
1080p Full HD 107 137 162 204

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 137
1920x1080 Low 204
1920x1080 Medium 162
1920x1080 Ultra 107
2560x1440 High 93
2560x1440 Low 165
2560x1440 Medium 115
2560x1440 Ultra 71
3840x2160 High 59
3840x2160 Low 98
3840x2160 Medium 64
3840x2160 Ultra 46

Performance Analysis: Rust on Your System

The AMD Ryzen 9 5950X paired with the AMD Radeon RX 7900 XT delivers a strong Rust experience across all common resolutions, with the data showing that 4K is the only scenario where the most demanding preset drops below the 60 FPS playable threshold. At 2560x1440 and 1920x1080, this combination has enough headroom to run Rust at Ultra settings while maintaining average frame rates well above 60 FPS, making it a versatile setup for players who prioritize visual fidelity without sacrificing smoothness. The measured results indicate a clear scaling pattern where lower resolutions and lower settings yield progressively higher frame rates, with the largest performance gap appearing between Low and Ultra presets at each resolution.

Best Settings per Resolution

At 3840x2160 (4K), the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of 64 FPS. The data shows that High settings at this resolution drop to 58.7 FPS, just below the playable threshold, while Ultra falls further to 46.1 FPS. Low settings run at 98.2 FPS, but Medium is the sweet spot for 4K because it provides a substantial visual upgrade over Low while keeping the average frame rate above the 60 FPS line. Pushing to High sacrifices roughly 5 FPS on average, which may cause noticeable stutter during busy scenes in Rust, so Medium is the recommended ceiling for 4K play.

At 2560x1440 (1440p), the best settings are Ultra, producing an average of 70.9 FPS. Every preset at this resolution—Low, Medium, High, and Ultra—stays above 60 FPS, with Low at 164.7 FPS, Medium at 115.2 FPS, and High at 93 FPS. The margin between High and Ultra is about 22 FPS, but Ultra still clears the 60 FPS threshold comfortably, so there is no reason to compromise on settings at 1440p. This resolution offers the best balance for this combo, as it allows the full Ultra preset while retaining enough headroom for dips in demanding areas.

At 1920x1080 (1080p), the best settings are also Ultra, with an average of 107.3 FPS. Low settings hit 204.2 FPS, Medium reaches 162.3 FPS, and High runs at 136.9 FPS. All presets exceed 60 FPS by a wide margin, and even Ultra maintains over 100 FPS on average, making 1080p the most forgiving environment for this hardware. The data suggests that players using 1080p monitors can enable every graphical feature without worrying about frame rate drops, as the gap between Ultra and the next lower preset (High) is nearly 30 FPS.

CPU and GPU Roles

The benchmark results reveal that the GPU becomes the dominant factor at higher resolutions, while the CPU’s 16-core and 32-thread configuration ensures that even the most demanding presets are not bottlenecked by processing power. At 1920x1080, the average frame rates range from 107.3 FPS (Ultra) to 204.2 FPS (Low), showing a difference of about 97 FPS between presets. This wide spread indicates that the GPU is doing most of the heavy lifting, as lowering settings directly translates to higher output. The Ryzen 9 5950X, with its high single-thread score of 944 in 3dmark_single_thread and 1614 in cinebench_r23_singlecore, provides enough per-core performance to keep the frame pipeline fed, but the RX 7900 XT’s rasterization power is what scales the FPS as settings drop.

Moving to 2560x1440, the same pattern persists but with lower absolute numbers: Ultra averages 70.9 FPS, Low averages 164.7 FPS. The relative difference between presets remains similar, about 94 FPS, which suggests that the GPU is still the primary limiter. However, the CPU’s role becomes slightly more important at this resolution because the higher pixel count increases the time each frame spends in the GPU, giving the CPU more opportunity to prepare the next frame. With a passmark_multithread score of 45424 and a geekbench_multicore score of 15233, the Ryzen 9 5950X has ample headroom to handle Rust’s simulation and entity updates, but the data shows that the GPU’s fill rate is what determines the final FPS.

At 3840x2160, the GPU’s dominance is even more pronounced. The average FPS drops from 98.2 (Low) to 46.1 (Ultra), a difference of 52 FPS, while the CPU’s workload remains relatively constant. This is a classic sign of GPU-bound performance: the RX 7900 XT’s 20 GB of GDDR6 memory and 800.0 GB/s bandwidth are stretched thin at 4K Ultra, but the CPU’s 64 MB L3 cache and 51.2 GB/s memory bandwidth are not the limiting factor. The scaling between resolutions at the same preset reinforces this: for example, High settings yield 136.9 FPS at 1080p, 93 FPS at 1440p, and 58.7 FPS at 4K, a steady decline that tracks pixel count rather than CPU capability. In short, the CPU matters less as resolution increases, but the Ryzen 9 5950X’s strong multi-threaded scores ensure it never becomes a bottleneck even at 1080p Low.

Measured FPS Breakdown

1920x1080:

  • Low: 204.2 FPS average
  • Medium: 162.3 FPS average
  • High: 136.9 FPS average
  • Ultra: 107.3 FPS average

At 1080p, the data shows a consistent step-down of roughly 30-40 FPS between each preset tier. Low runs at over 200 FPS, which is far beyond any display refresh rate commonly used, while Ultra still holds above 100 FPS. This makes 1080p the ideal resolution for competitive play if you prioritize max frame rates, but even the highest quality settings remain playable.

2560x1440:

  • Low: 164.7 FPS average
  • Medium: 115.2 FPS average
  • High: 93 FPS average
  • Ultra: 70.9 FPS average

The 1440p results show a similar pattern but with tighter gaps between presets. Low to Medium is a 49.5 FPS drop, Medium to High is 22.2 FPS, and High to Ultra is 22.1 FPS. The Ultra preset at 70.9 FPS is just above the 60 FPS threshold, providing a comfortable margin for most gameplay, though heavy firefights or large bases could cause dips.

3840x2160:

  • Low: 98.2 FPS average
  • Medium: 64 FPS average
  • High: 58.7 FPS average
  • Ultra: 46.1 FPS average

At 4K, the performance cliff becomes apparent. Low runs at nearly 100 FPS, but Medium drops to 64 FPS, and High falls below the playable threshold to 58.7 FPS. Ultra is noticeably slower at 46.1 FPS, which would result in a stuttery experience during intense moments. The data indicates that 4K players must choose between Low for high frame rates or Medium for a balanced experience, with no preset exceeding 100 FPS.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 9 5950X has an average benchmark score of 51947, and its nearest rivals are all within a narrow performance band. The Intel Core Ultra 5 235HX scores 52073, which is -0.2% relative to the 5950X, meaning it performs nearly identically in synthetic tests. The AMD EPYC 8124P scores 52121 (-0.3%), also essentially a tie. The Intel Core i9-13900F scores 51730 (0.4% faster), and the Intel Core i7-14700 scores 52301 (-0.7% slower). In practical terms, any of these CPUs would deliver the same Rust frame rates as the 5950X, since the game is not heavily multithreaded and the differences are under 1%. If you already own one of these processors, you would not notice any change in performance with the RX 7900 XT.

For the GPU, the AMD Radeon RX 7900 XT has an average benchmark score of 13745, but its nearest rivals are surprising: the AMD Radeon 660M scores 13812 (-0.5%), the NVIDIA RTX A2000 Mobile scores 13821 (-0.5%), and the AMD Radeon RX 570X scores 13871 (-0.9%). These are all within 1% of the RX 7900 XT in the aggregate benchmark, which suggests that in this specific test database, the 7900 XT’s average score is dragged down by its varied workload results (e.g., passmark_directx_9 at 322 and passmark_directx_12 at 110). However, the AMD Radeon RX 9070 XT scores 13543 (1.5% higher), which is the closest true modern desktop alternative. In Rust specifically, the measured FPS would likely be similar among these GPUs, but the RX 9070 XT’s newer architecture might handle the game’s draw calls slightly better, despite the marginal benchmark delta.

How This Combo Ranks

The combined AMD Ryzen 9 5950X and AMD Radeon RX 7900 XT system ranks 698th out of 3723 tested combos in Rust, placing it in the top 19% of all configurations. This percentile is respectable but not elite, which aligns with the measured FPS data: the combo handles 1080p and 1440p Ultra easily, but 4K Ultra falls short of 60 FPS. The rank reflects that while the CPU is a high-end 16-core part (91st percentile among all CPUs), the GPU’s 55th percentile among all GPUs holds the combo back from the very top tier. Many combos with faster GPUs (e.g., those with higher passmark_g3d scores) would outperform this setup at 4K, but for the majority of players using 1080p or 1440p monitors, this ranking is more than sufficient. The data shows that the combo’s weak point is purely at 4K Ultra, where the RX 7900 XT’s 51.48 TFLOPS FP32 performance is insufficient to maintain 60 FPS with maxed settings.

FAQ

Q: Can this combo run Rust at 4K with Ultra settings?

A: No. The measured average FPS at 3840x2160 Ultra is 46.1 FPS, which is below the 60 FPS playable threshold. The highest playable setting at 4K is Medium, which averages 64 FPS.

Q: What is the best settings preset for 1440p gaming?

A: Ultra is the best choice at 2560x1440, as it averages 70.9 FPS, staying above the 60 FPS threshold. All other presets (Low at 164.7 FPS, Medium at 115.2 FPS, High at 93 FPS) also exceed 60 FPS, but Ultra offers the highest quality without sacrificing playability.

Q: How much faster is Low settings compared to Ultra at 1080p?

A: At 1920x1080, Low averages 204.2 FPS while Ultra averages 107.3 FPS, a difference of 96.9 FPS. Low is roughly 90% faster than Ultra in average frame rate.

Q: Is the CPU or GPU more important for Rust at higher resolutions?

A: The data shows that the GPU becomes the primary bottleneck at higher resolutions. At 4K, the average FPS drops from 98.2 (Low) to 46.1 (Ultra), while the CPU’s strong multi-threaded scores (e.g., cinebench_r23_multicore at 26017) indicate it is not limiting. At 1080p, the GPU still dominates, as shown by the wide FPS spread between presets.

Q: How does this combo rank compared to all tested systems in Rust?

A: It ranks 698th out of 3723 combos, placing it in the top 18.8% of all configurations tested. This is a solid result, but not top-tier due to the GPU’s 55th percentile ranking among all GPUs.

Q: What are the nearest CPU alternatives to the Ryzen 9 5950X?

A: The Intel Core Ultra 5 235HX (delta -0.2%), AMD EPYC 8124P (-0.3%), Intel Core i9-13900F (0.4%), and Intel Core i7-14700 (-0.7%) all have average benchmark scores within 0.7% of the 5950X, meaning they would produce nearly identical Rust performance.