Instant compatibility check with FPS benchmarks and optimization tips
Rust
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 32 | 40 | 48 | 68 |
| 1440p QHD | 50 | 69 | 79 | 116 |
| 1080p Full HD | 75 | 97 | 115 | 170 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Rust on Your System
The AMD Ryzen 9 5950X paired with the AMD Radeon RX 6750 XT presents a high-core-count CPU with a mid-range GPU. This combination produces a clear bottleneck pattern in Rust, where the graphics card is the limiting factor at higher resolutions, while the CPU’s strong single-thread performance ensures high frame rates at lower settings.
Measured FPS Breakdown
The measured FPS data for this combo in Rust covers three resolutions and four quality presets. At 1920x1080, the combo delivers its strongest performance. On Low settings, the average FPS reaches 170.3. Moving to Medium, the average drops to 115. High settings produce an average of 97 FPS. The most demanding Ultra preset still clears the playable threshold comfortably, with an average of 74.6 FPS. This indicates that at 1080p, the system has substantial headroom even at maximum quality.
At 2560x1440, performance scales down predictably. Low settings yield an average of 116.3 FPS. Medium settings average 78.7 FPS. High settings average 69 FPS, which just clears the 60 FPS playable threshold. Ultra settings, however, fall below that threshold, averaging 49.6 FPS. The data shows a steep drop from Medium to Ultra, suggesting that the 1440p Ultra preset introduces rendering costs that this GPU cannot sustain for smooth gameplay.
At 3840x2160, the system struggles under load. Low settings average 67.6 FPS, barely above the playable threshold. Medium averages 47.8 FPS. High averages 39.8 FPS. Ultra averages 31.7 FPS. The progression from Low to Ultra at 4K shows a consistent degradation of about 8 FPS per preset step, indicating that the RX 6750 XT is heavily taxed at this resolution regardless of CPU capability.
The absence of min and max FPS values means the analysis relies solely on average frame rates. However, the averages alone show a clear trend: the combo is playable at 1080p in all presets and at 1440p up to High, but at 4K it only manages playable frame rates on Low settings.
How This Combo Ranks
In the benchmark database, this specific CPU-GPU combination ranks 1814 out of 3723 tested combos for Rust. This places the combo in the 48.7th percentile of all combinations tested, meaning roughly half of the tested systems perform better and half perform worse. Given that the CPU is a high-end 16-core part and the GPU is a mid-range 12 GB card, this ranking reflects the GPU’s limitations in Rust’s rendering workload.
The rank suggests that while the CPU is overqualified for this game, the GPU holds the combo back from higher placement. Systems with similar rankings likely feature comparable GPU performance paired with less powerful CPUs, which reinforces the idea that Rust at high resolutions is GPU-bound. The combo’s ability to hit high frame rates at 1080p is consistent with a mid-range GPU, while the 4K results align with the GPU’s 71st percentile ranking among all GPUs.
Similar Performance Alternatives
Based on the nearest rivals for the CPU and GPU, several alternative components would produce similar behavior. The CPU’s nearest rivals include the Intel Core Ultra 5 235HX with a delta of -0.2%, the AMD EPYC 8124P at -0.3%, the Intel Core i9-13900F at +0.4%, and the Intel Core i7-14700 at -0.7%. These processors have average benchmark scores within a fraction of a percent of the Ryzen 9 5950X, so swapping in any of them would not meaningfully change Rust’s frame rates. The Core i9-13900F is the closest match, scoring 0.4% higher on average, which is negligible in real-world gameplay.
For the GPU, the nearest rivals are the AMD Radeon R9 M395X with a delta of +0.5%, the AMD FirePro W7100 at +0.6%, the AMD FirePro D700 at +0.7%, and the NVIDIA GeForce RTX 3080 Ti Mobile at +1.1%. These GPUs have average scores within a narrow band, but they are not direct replacements. The R9 M395X is a much older mobile-oriented part, and the FirePro cards are workstation products. The RTX 3080 Ti Mobile is the most interesting comparison, as it scores 1.1% higher than the RX 6750 XT, suggesting the desktop RX 6750 XT and this high-end mobile GPU perform nearly identically in synthetic tests. In Rust, a system with an RTX 3080 Ti Mobile would likely produce similar FPS figures at the same settings.
The Verdict
This PC can run Rust, but the playable range is limited by resolution and preset. At 1920x1080, the combo clears the 60 FPS threshold at every preset, including Ultra with an average of 74.6 FPS. At 2560x1440, High settings average 69 FPS, which is playable, but Ultra drops to 49.6 FPS and is not playable. At 3840x2160, only Low settings are playable, with an average of 67.6 FPS; Medium, High, and Ultra all fall below 60 FPS.
The verdict is straightforward: for 1080p gaming, this combo is fully capable of maxed-out settings. For 1440p, players should stick to High or lower presets. For 4K, the system is only viable on Low settings, and even then the average FPS is just above the threshold, leaving little margin for demanding scenes. The data does not include min FPS values, so stutters or drops in complex areas could push the 4K Low experience below playable levels.
CPU and GPU Roles
The performance scaling across resolutions reveals the division of labor between the Ryzen 9 5950X and the RX 6750 XT. At 1920x1080, the difference between Low and Ultra is 95.7 FPS (170.3 to 74.6), which shows that the GPU is the primary limiter, as the CPU can feed high frame rates at low settings. The CPU’s strong single-thread score of 1614 in Cinebench R23 and 944 in 3DMark single-thread ensures that it is not a bottleneck at 1080p.
At 2560x1440, the spread between Low and Ultra is 66.7 FPS (116.3 to 49.6). The reduction in the spread relative to 1080p indicates that the GPU is becoming more strained, but the CPU still provides enough throughput to keep Low settings above 100 FPS. At 3840x2160, the spread narrows further to 35.9 FPS (67.6 to 31.7). This compression suggests that the GPU is now the dominant constraint, and even the powerful CPU cannot compensate for the pixel-pushing demands of 4K.
The data implies that for this game, the GPU matters more at higher resolutions, while the CPU matters more at lower resolutions. At 1080p Low, the system achieves 170.3 FPS, which is only possible with a CPU that can handle Rust’s simulation and draw calls. At 4K Ultra, the 31.7 FPS average is purely a GPU limitation; a faster CPU would not meaningfully improve the result. The CPU’s 16 cores and 32 threads, with a max threaded score of 11597 in 3DMark, are largely irrelevant for Rust’s frame rates, as the game does not scale with core count in the same way as synthetic workloads.
Best Settings per Resolution
The data identifies the most demanding preset that maintains at least 60 FPS average at each resolution. At 1920x1080, the best settings are Ultra, with an average of 74.6 FPS. This is the highest quality preset tested, and it stays well above the playable threshold, making it the recommended choice for 1080p.
At 2560x1440, the best settings are High, averaging 69 FPS. Medium is also playable at 78.7 FPS, but High offers better visual quality while still clearing the threshold. Ultra falls short at 49.6 FPS, so High is the optimal balance.
At 3840x2160, the best settings are Low, averaging 67.6 FPS. This is the only playable preset at 4K. Medium drops to 47.8 FPS, so there is no room for quality adjustments. Players at 4K must accept Low settings for a playable experience, and even then, the margin above 60 FPS is slim.